Ver Investigador - - Prisma - Unidad de Bibliometría

Israel García García

Profesor Titular de Universidad
israelgarcia@us.es
Área de conocimiento: Mecánica de Medios Continuos y Teoría de Estructuras
Departamento: Mecánica de Medios Continuos y Teoría de Estructuras
Grupo: Grupo de Elasticidad y Resistencia de Materiales - TEP-131 (Universidad de Sevilla)
Prog. doctorado: Prog.de Doct.en Ingeniería Mecánica y de Organización Industrial (99/2011)
Tipo Año Título Fuente
Artículo2024 Effect of stacking direction and raster angle on the fracture properties of Onyx 3D printed components: A mesoscale analysis THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2023 Crack impinging on a curved weak interface: penetration or deflection? JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
Artículo2023 Effect of tailored fiber deposition in 3D printed composites: application of an anisotropic phase field model THEORETICAL AND APPLIED FRACTURE MECHANICS
Ponencia2023 Predicción de daño de compuestos híbridos con capas ultradelgadas de carbono/epoxi utilizando el criterio acoplado Revista española de mecánica de la fractura
Capítulo2023 Simuladores de prácticas de laboratorio en mecánica de medios continuos como complemento formativo a las prácticas reales en el laboratorio Mejorando la enseñanza a través de la innovación educativa
Artículo2022 Experimental evaluation of the similarity in the interface fracture energy between PMMA/epoxy/PMMA and PMMA/epoxy joints ENGINEERING FRACTURE MECHANICS
Artículo2022 Fracture tailoring in 3D printed continuous fibre composite materials using the Phase field approach for fracture COMPOSITE STRUCTURES
Ponencia2022 On different 3D printing methods and fracture performance in dcb composite specimens including structured interfaces Revista española de mecánica de la fractura
Artículo2022 On different 3D printing methods and fracture performance in DCB composite specimens including structured interfaces THEORETICAL AND APPLIED FRACTURE MECHANICS
Ponencia2022 On the effect of the interface radius on the ability to arrest cracks of curved weak interfaces Revista española de mecánica de la fractura
Ponencia2021 Efecto de tamaño en laminados cruzados: Estudio de la transición entre escalas de la iniciación de grietas usando un enfoque variacional de la mecánica de la fractura Revista española de mecánica de la fractura
Ponencia2021 Tenacidad a la fractura en la interfaz en juntas adhesivas. Comparación experimental entre PMMA/PMMA unido por epoxi y PMMA/epoxi Revista española de mecánica de la fractura
Artículo2020 Crack arrest through branching at curved weak interfaces: An experimental and numerical study THEORETICAL AND APPLIED FRACTURE MECHANICS
Artículo2020 In-situ strength effects in long fibre reinforced composites: A micro-mechanical analysis using the phase field approach of fracture THEORETICAL AND APPLIED FRACTURE MECHANICS
Editorial2020 Preface INTERNATIONAL JOURNAL OF FRACTURE
Artículo2019 A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesive zone model INTERNATIONAL JOURNAL OF FRACTURE
Artículo2019 An experimental study of the translaminar fracture toughnesses in composites for different crack growth directions, parallel and transverse to the fiber direction COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2019 Experimental study of the size effect on transverse cracking in cross-ply laminates and comparison with the main theoretical models MECHANICS OF MATERIALS
Artículo2018 Boundary integral formulation of frictionless contact problems based on an energetic approach and its numerical implementation by the collocation BEM Frontiers in Built Environment
Artículo2018 Coupled stress and energy criterion for multiple matrix cracking in cross-ply composite laminates INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2018 The effect of residual thermal stresses on transverse cracking in cross-ply laminates: an application of the coupled criterion of the finite fracture mechanics INTERNATIONAL JOURNAL OF FRACTURE
Ponencia2017 Effect of residual thermal stresses in the coupled criterion. An application to transverse cracking in cross-ply laminates ICF 2017 - 14th International Conference on Fracture
Capítulo2017 Micromechanics of interfacial damage in composites Comprehensive Composite Materials II
Artículo2016 A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanics COMPOSITES PART B-ENGINEERING
Ponencia2016 Evolution of crack density in cross-ply laminates. Application of a coupled stress and energy criterion Key engineering materials
Ponencia2016 Revisiting the problem of debond initiation at fibre-matrix interface under transversal biaxial loads. A comparison of several non-classical fracture mechanics approaches Key engineering materials
Artículo2015 A model for the prediction of debond onset in spherical-particle-reinforced composites under tension. Application of a coupled stress and energy criterion COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2015 Debonding at the fibre-matrix interface under remote transverse tension. One debond or two symmetric debonds? EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
Ponencia2014 Comparison of the size effect predicted by a cohesive zone model and the finite fracture mechanics for the fiber-matrix debonding 16th European Conference on Composite Materials, ECCM 2014
Ponencia2014 Crack onset at the spherical-inclusion matrix interface. Application of a coupled stress and energy criterion Procedia Materials Science
Ponencia2014 Experimental comparison between the transverse fracture toughness of a unidirectional laminate corresponding to either longitudinal or transverse crack growth 16th European Conference on Composite Materials, ECCM 2014
Artículo2014 Fiber-size effects on the onset of fiber-matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models ENGINEERING FRACTURE MECHANICS
Artículo2014 Transverse crack onset and growth in cross-ply [0/90](s) laminates under tension. Application of a coupled stress and energy criterion INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2012 Crack onset and growth at the fibre-matrix interface under a remote biaxial transverse load. Application of a coupled stress and energy criterion INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Artículo2012 Mixed-mode crack initiation at a v-notch in presence of an adhesive joint INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Ponencia2012 Size effect on transverse crack initiation in cross-ply laminates. Application of a coupled stress and energy criterion ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Ponencia2012 The effect of transverse load biaxiality on the fibre-matrix debond initiation in FRC. Application of a coupled stress and energy criterion at the micromechanical level ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Ponencia2011 Aplicación de un criterio acoplado de tensión y energía al inicio de una grieta transversal en laminados [0m, 90n]s sometidos a tensión longitudinal Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011
Ponencia2011 Iniciación del despegue en la interfase fibra matriz bajo una tensión biaxial. Aplicación de un criterio acoplado tensional y energético Anales de Mecánica de la Fractura

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/03/2023 28/02/2027 Investigador/a Ductility and Fracture Toughness analysis of functionally graded materials” - DIAGONAL (GRANT AGREEMENT 101086342) Comisión Europea (Europeo)
01/12/2022 30/11/2024 Investigador/a Métodos computacionales multi-escala y multi-física para la predicción de procesos de fractura de sistemas fotovoltaicos (TED2021-131649B-I00) Ministerio de Ciencia e Innovación (Nacional)
05/10/2021 31/12/2022 Investigador/a COMPBIOS-e. An innovative paradigm for highly stretchable electronic systems with enhanced damage tolerance and contact-adhesion: multi-scale and multi-physics modelling framework and exploitation of bioinspired designs via 3D printing techniques (P20_00595) Consejería de Economía, Conocimiento, Empresas y Universidad (Autonómico)
01/09/2021 31/08/2024 Responsable Modelos numéricos y algoritmos para la simulación de altas prestaciones en análisis estructural (PID2020-117001GB-I00) Ministerio de Ciencia e Innovación (Nacional)
01/05/2020 31/10/2024 Investigador/a New strategies for multifield fracture problems across scales in heterogeneous systems for Energy, Health and Transport -NEWFRAC (H2020-861061) Comisión Europea (Europeo)
01/02/2020 30/04/2022 Investigador/a Interfases estructuradas en estructuras de materiales compuestos (IntEstComp) (US-1265577) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
01/01/2016 31/12/2018 Investigador/a Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Diferentes Escalas (MAT2015-71036-P) Ministerio de Economía y Competitividad (Nacional)
30/01/2014 29/01/2018 Investigador/a Estudio del Comportamiento de Laminados Gruesos de Material Compuesto Sometidos a Cargas de Compresión. (P12-TEP-1050) Consejería de Economía, Innovación y Ciencia (Autonómico)
01/01/2013 31/12/2015 Investigador/a Caracterización y Medida de las Propiedades de la Interfase en Materiales Compuestos Mediante Ensayos de Fibra Única Usando Enfoques no Clásicos de la Mecánica de la Fractura (MAT2012-37387) Ministerio de Economía y Competitividad (Nacional)
05/05/2011 31/12/2014 Investigador/a Desarrollo de un nuevo diseño de una pantalla ferroviaria triple función: viento, ruido y energía (TRIPANTALLA) (IPT-2011-1099-370000) Ministerio de Ciencia e Innovación (Nacional)
13/01/2009 31/12/2013 Investigador/a Estudio de Inicio y Propagación de Daño en Materiales Compuestos a Escala Micro y Meso Mediante Desarrollo y Aplicación de la Mecánica de la Fractura Finita (P08-TEP-04051) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)
13/01/2009 31/12/2013 Contratado Estudio de Inicio y Propagación de Daño en Materiales Compuestos a Escala Micro y Meso Mediante Desarrollo y Aplicación de la Mecánica de la Fractura Finita (P08-TEP-04051) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
09/04/2018 08/04/2019 Investigador/a Cálculo Estructural Rack 02 Instalación 02 EC 145 (3434/0955) AYESA AIR CONTROL, S.L. (Desconocido)
05/04/2013 31/12/2014 Investigador/a NUREMCO (Nuevas Tecnologías de Refuerzo en Materiales Compuestos) (PI-1198/2013) Centro de Estudios de Materiales (Desconocido)
05/04/2013 31/12/2013 Investigador/a ARID LAP (PI-1195/2013) Instalaciones Inabensa, S.A. (Desconocido)

Ayudas

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/05/2011 30/07/2011 Responsable Estancia: Université Pierre et Marie Curie, Paris, Francia, 90 días (PP2011-05-011) Universidad de Sevilla (Local)
El investigador no tiene ningún resultado de investigación asociado