| Artículo | 2024 |
A simple stress-based failure criterion for predicting unfolding failure
|
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING |
| Libro | 2024 |
Elasticidad y resistencia de materiales: Del punto a la estructura
|
Elasticidad y resistencia de materiales: Del punto a la estructura |
| Artículo | 2024 |
Numerical Characterization of the In-plane Shear Behaviour of Non-Crimp Fabric Composites
|
Journal of Applied and Computational Mechanics |
| Capítulo | 2023 |
Fiber–matrix debonding in composite materials
|
Modeling Damage, Fatigue and Failure of Composite Materials: A volume in Woodhead Publishing Series in Composites Science and Engineering, Second Edition |
| Artículo | 2022 |
Normal stress flow evaluation in composite aircraft wing sections by strength of material models
|
COMPOSITE STRUCTURES |
| Resumen congreso | 2022 |
Practical introduction to snap-back control algorithms in a commercial FEM software
|
Congress on NumericalMethods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria) |
| Ponencia | 2021 |
Development of a prototype test system for certification of curved fuselage panels
|
IOP Conference Series-Materials Science and Engineering |
| Artículo | 2020 |
Determination of in-plane and through-the-thickness coefficients of thermal expansion in composite angle brackets using digital image correlation
|
COMPOSITE STRUCTURES |
| Ponencia | 2020 |
Failure mechanisms involved in the unfolding failure
|
ECCM 2018 - 18th European Conference on Composite Materials |
| Artículo | 2020 |
Numerical analysis of the damage evolution on ilts specimens
|
Anales de Mecánica de la Fractura |
| Artículo | 2019 |
Fallo por unfolding en laminados curvos de material compuesto:: campaña de ensayos y análisis tenisonal
|
Anales de Mecánica de la Fractura |
| Artículo | 2019 |
Modelado 3D de la delaminación de laminados curvos de material compuesto causada pro tensiones interlaminares
|
Anales de Mecánica de la Fractura |
| Artículo | 2019 |
Predicting failure load of a non-crimp fabric composite by means of a 3D finite element model including progressive damage
|
COMPOSITE STRUCTURES |
| Artículo | 2018 |
BEM multiscale modelling involving micromechanical damage in fibrous composites
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2018 |
Boundary integral formulation of frictionless contact problems based on an energetic approach and its numerical implementation by the collocation BEM
|
Frontiers in Built Environment |
| Artículo | 2018 |
Competing mechanisms in the unfolding failure in composite laminates
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Ponencia | 2018 |
Finite element modeling of thermal deformations in composite materials
|
2018 Advances in Science and Engineering Technology International Conferences, ASET 2018 |
| Ponencia | 2018 |
On the thickness dependence of ILTS in curved composite laminates
|
Key engineering materials |
| Artículo | 2017 |
Galerkin boundary integral formulation for axisymmetric stokes flow
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2017 |
Semi-analytic model to evaluate non-regularized stresses causing unfolding failure in composites
|
COMPOSITE STRUCTURES |
| Artículo | 2016 |
A new analytical model for evaluating interlaminar stresses in the unfolding failure of composite laminates
|
COMPOSITE STRUCTURES |
| Capítulo | 2016 |
Fiber-matrix debonding in composite materials: Axial loading
|
Modeling Damage, Fatigue and Failure of Composite Materials |
| Ponencia | 2016 |
LEBIM predictions for fibre-matrix debonds in unidirectional fibre-reinforced composites under biaxial transverse loads
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Artículo | 2016 |
Modelling interfacial debonds in unidirectional fibre-reinforced composites under biaxial transverse loads
|
COMPOSITE STRUCTURES |
| Ponencia | 2016 |
Modelling thermal deformations in curved composite laminates using standard shell finite elements
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Ponencia | 2016 |
Numerical and experimental study on the failure of non-conventional laminates
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Editorial | 2016 |
Special Issue on Modeling of fracture and damage in composite materials Foreword
|
ENGINEERING FRACTURE MECHANICS |
| Ponencia | 2016 |
Stacking sequence optimization of curved UD-CFRP laminates for improving unfolding strength considering thermal residual stresses
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Artículo | 2016 |
Three dimensional finite element study of the behaviour and failure mechanism of non-crimp fabric composites under in-plane compression
|
COMPOSITE STRUCTURES |
| Artículo | 2015 |
A linear elastic-brittle interface model: application for the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Artículo | 2015 |
A model for the prediction of debond onset in spherical-particle-reinforced composites under tension. Application of a coupled stress and energy criterion
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2015 |
Debonding at the fibre-matrix interface under remote transverse tension. One debond or two symmetric debonds?
|
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS |
| Ponencia | 2015 |
Semi-analytic solution of non-regularized unfolding stresses in composite beams employing a series approximation based on legendre polynomials
|
ICCM International Conferences on Composite Materials |
| Artículo | 2015 |
Study of the ultrasonic compaction process of composite laminates - part I: process modeling
|
INTERNATIONAL JOURNAL OF MATERIAL FORMING |
| Artículo | 2015 |
Study of the ultrasonic compaction process of composite laminates-part II: advanced numerical simulation
|
INTERNATIONAL JOURNAL OF MATERIAL FORMING |
| Ponencia | 2014 |
Analytic evaluation of radial stresses in unfolding failure of composite materials. Comparison with numerical solutions
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Analytical and numerical models for predicting unfolding failure in composite beams
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Crack onset at the spherical-inclusion matrix interface. Application of a coupled stress and energy criterion
|
Procedia Materials Science |
| Artículo | 2014 |
Effect of Friction on the Size of the Near-tip Contact Zone in a Penny-shaped Interface Crack
|
WEAR AND CONTACT MECHANICS |
| Ponencia | 2014 |
Instability analysis of the fibre-matrix debond onset and growth under transverse tension
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Modeling the heat distribution of a composite laminate during ultrasonic compaction with the PGD
|
16th European Conference on Composite Materials, ECCM 2014 |
| Artículo | 2014 |
Modelling the waviness of the fibres in non-crimp fabric composites using 3D finite element models with straight tows
|
COMPOSITE STRUCTURES |
| Ponencia | 2014 |
Progressive damage study of NCF composites under compressive loading
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2013 |
In-plane shear behaviour of non-crimp fabric laminates by means of 3D finite element analysis
|
IV ECCOMAS Thematic Conference on the Mechanical Response of Composites COMPOSITES 2013 (2013). |
| Artículo | 2013 |
Modelado de grietas de interfase en un composite con un grupo de fibras sometido a cargas transversales biaxiales
|
Anales de Mecánica de la Fractura |
| Artículo | 2012 |
A Galerkin projection technique for the evaluation of potential derivatives on a smooth boundary in 2D BEM
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2012 |
A least squares procedure for the evaluation of multiple generalized stress intensity factors at 2D multimaterial corners by BEM
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2012 |
Estudio de grietas transversales y de delaminación en laminados simétricos [0/90] de material compuesto usando la formulación de interfase elástica lineal-frágil
|
Anales de Mecánica de la Fractura |
| Ponencia | 2012 |
Study of transverse and delamination cracks in [0/90] symmetric laminates by means of the classical LEFM and the linear elastic brittle interface formulation
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Artículo | 2011 |
BEM analysis of crack onset and propagation along fiber-matrix interface under transverse tension using a linear elastic-brittle interface model
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2011 |
Caracterización del inicio y crecimiento de grietas de interfaz entre fibra y matriz bajo cargas transversales biaxiales usando el modelo de interfaz elástica lineal-frágil
|
Anales de Mecánica de la Fractura |
| Ponencia | 2011 |
Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test
|
Procedia Engineering |
| Ponencia | 2011 |
Influence of transverse properties in the modeling of debond propagation in single carbon fiber composites
|
COMPOSITE MATERIALS FOR STRUCTURAL PERFORMANCE: TOWARDS HIGHER LIMITS |
| Ponencia | 2011 |
Inicio y crecimiento de grietas de interfase entre fibra y matriz en un grupo de fibras sometido a cargas transversales
|
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011 |
| Ponencia | 2011 |
Study of the heating of pre-preg layers subjected to ultrasonic vibrations
|
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011 |
| Artículo | 2010 |
A BEM analysis of a penny-shaped interface crack using the open and the frictionless contact models: Range of validity of various asymptotic solutions
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2010 |
Analysis of a crack in a thin adhesive layer between orthotropic materials: An application to composite interlaminar fracture toughness test
|
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES |
| Artículo | 2010 |
BEM analysis of crack onset and growth in composites using the linear elastic-brittle interface model
|
RECENT DEVELOPMENTS IN BOUNDARY ELEMENT METHODS: A VOLUME TO HONOUR JOHN T. KATSIKADELIS |
| Ponencia | 2009 |
Caracterización de grietas de interfaz entre fibra y matriz bajo cargas transversales uniaxiales usando la teoría de interfaz débil
|
Métodos numéricos en Ingeniería, 2009: [comunicaciones presentadas al III Congreso de Métodos Numéricos en Ingeniería, celebrado en Barcelona desde el 19 de junio al 2 de julio de 2009] |
| Artículo | 2009 |
Critical study of existing solutions for a penny-shaped interface crack, comparing with a new boundary element solution allowing for frictionless contact
|
ENGINEERING FRACTURE MECHANICS |
| Artículo | 2009 |
Numerical analysis of debond propagation in the single fibre fragmentation test
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Ponencia | 2009 |
Three dimensional finite element model of a non-crimp fabric laminated using geometrically straight tows with crimped material properties
|
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011 |
| Artículo | 2008 |
Modelado del crecimiento de una grieta en modo i a lo largo de una interfaz débil mediante el MEC. Aplicación al ensayo de fractura interlaminar de materiales compuestos
|
Anales de Mecánica de la Fractura |
| Artículo | 2008 |
Prediction of in-plane stiffness properties of non-crimp fabric laminates by means of 3D finite element analysis
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2007 |
Análisis del efecto de la fricción en una grieta inclinada en el interior de un tubo sometido a compresión
|
Anales de Mecánica de la Fractura |
| Artículo | 2007 |
On the estimation of the first interpenetration point in the open model of interface cracks
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Capítulo | 2007 |
Problemas de contacto en el estudio del daño en materiales compuestos fibrosos
|
Avances en mecánica de medios continuos : simposium en honor al profesor J.A. Garrido García |
| Artículo | 2006 |
Galerkin boundary integral analysis for the axisymmetric Laplace equation
|
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING |
| Artículo | 2005 |
Weak formulation of axi-symmetric frictionless contact problems with boundary elements application to interface cracks
|
COMPUTERS & STRUCTURES |
| Ponencia | 2003 |
Single fiber fragmentation test. A BEM analysis
|
44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference |
| Ponencia | 2002 |
Enfoques micromecánicos en la predicción de fallos de materiales compuestos
|
Métodos numéricos en ingeniería V |
| Artículo | 2000 |
A critical study of hypersingular and strongly singular boundary integral representations of potential gradient
|
COMPUTATIONAL MECHANICS |
| Artículo | 1999 |
A simple local smoothing scheme in strongly singular boundary integral representation of potential gradient
|
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
| Artículo | 1999 |
Potential gradient recovery using a local smoothing procedure in the Cauchy integral
|
Communications in Numerical Methods in Engineering |
| Capítulo | 1996 |
Un método simple de suavizar la representación integral singular fuerte de contorno del gradiente del potencial
|
Métodos numéricos en ingeniería : [comunicaciones presentadas al III Congreso de Métodos Numéricos en Ingeniería, celebrado en Zaragoza durante los días 3-6 de junio de 1996] |
