Artículo | 2024 |
A semi-analytical matrix formalism for stress singularities in anisotropic multi-material corners with frictional boundary and interface conditions
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
Ponencia | 2024 |
Behaviour of fibre/matrix interface cracks under biaxial stress state caused by edge effect in carbon/epoxy laminates
|
Materiales Compuestos |
Libro | 2024 |
Elasticidad y resistencia de materiales: Del punto a la estructura
|
Elasticidad y resistencia de materiales: Del punto a la estructura |
Ponencia | 2024 |
SingSol: A Web Application for Singularity Analysis in Multi-material Corners with Homogeneous Boundary Conditions
|
Springer Proceedings in Materials |
Artículo | 2024 |
Static and fatigue performance of non-circular rivet joints: Comparison between numerical modelling and preliminary testing
|
ENGINEERING FAILURE ANALYSIS |
Capítulo | 2023 |
Computational procedure for singularity analysis of anisotropic elastic multimaterial corners - Applications to composites and their joints
|
Computational and Experimental Methods in Structures |
Artículo | 2023 |
Experimental observations of fatigue damage in cross-ply laminates using carbon/epoxy ultra-thin plies
|
COMPOSITE STRUCTURES |
Capítulo | 2023 |
Failure models for composite joints
|
Modeling Damage, Fatigue and Failure of Composite Materials: A volume in Woodhead Publishing Series in Composites Science and Engineering, Second Edition |
Artículo | 2023 |
Fatigue life of unidirectional 90° carbon/epoxy laminates made of conventional and ultra‐thin plies varying manufacturing and testing conditions
|
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES |
Ponencia | 2023 |
Flexural behaviour after tension-tension fatigue testing of cross-ply laminates made of carbon/epoxy ultra-thin plies
|
Advances in fracture and damage mechanics XX |
Artículo | 2023 |
Non-conventional failures caused by the edge effect in cross-ply laminates made of ultra-thin plies
|
COMPOSITES PART B-ENGINEERING |
Artículo | 2023 |
Numerical and experimental analysis of ultra-thin plies in carbon/epoxy cross-ply laminates subjected to bending after tensile cyclic loading
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
Artículo | 2023 |
Thermomechanical characterisation data of 30 g/m2 and 150 g/m2 cured unidirectional carbon/epoxy tape prepreg TP 402/T700S
|
DATA IN BRIEF |
Artículo | 2022 |
A powerful matrix formalism for stress singularities in anisotropic multi-material corners. Homogeneous (orthogonal) boundary and interface conditions
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
Revisión | 2022 |
A review on failure theories and simulation models for adhesive joints
|
JOURNAL OF ADHESION |
Ponencia | 2022 |
Computational semi-analytic code for stress singularity analysis
|
Procedia Structural Integrity |
Artículo | 2021 |
Comparison of the shear behavior in graphite-epoxy composites evaluated by means of biaxial test and off-axis tension test
|
Science and Engineering of Composite Materials |
Ponencia | 2021 |
Estudio experimental a fatiga de laminados unidireccionales a 90⁰
|
Revista española de mecánica de la fractura |
Ponencia | 2021 |
Experimental assessment of fatigue damage mechanisms in [04/90n]s laminates using carbon-epoxy ultrathin plies
|
ICFC 8 - the Eighth International Conference on Fatigue of Composites (2021). |
Ponencia | 2021 |
Formalismo matricial para la resolución de problemas de singularidades de tensión en esquinas multimateriales anisótropas con condiciones de contorno homogéneas
|
Revista española de mecánica de la fractura |
Capítulo | 2021 |
Joining of PMC to Concrete for Structural Applications
|
Encyclopedia of Materials: Composites |
Artículo | 2021 |
Riveted joints in composites, a practical tool to estimate stresses around the rivet hole
|
COMPOSITE STRUCTURES |
Artículo | 2021 |
University accreditations and publication of articles on education in Spain
|
CULTURA Y EDUCACION |
Artículo | 2020 |
A note on Pageau et al. (1994) results for the order of stress singularities in multimaterial junctions
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
Artículo | 2020 |
Premature failures in standard test specimens with composite materials induced by stress singularities in adhesive joints
|
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES |
Artículo | 2019 |
FLEXOR: a support tool for efficient and seamless experiment data processing to evaluate musculo-articular stiffness
|
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE |
Artículo | 2019 |
Influencia en el fallo de probetas off-axis de las singularidades del estado tensional
|
Anales de Mecánica de la Fractura |
Artículo | 2019 |
On the optimal choice of fibre orientation angle in off-axis tensile test using oblique end-tabs: Theoretical and experimental studies
|
COMPOSITES SCIENCE AND TECHNOLOGY |
Artículo | 2018 |
A Device for Biaxial Testing in Uniaxial Machines. Design, Manufacturing and Experimental Results Using Cruciform Specimens of Composite Materials
|
EXPERIMENTAL MECHANICS |
Artículo | 2018 |
A study of the reproducibility and reliability of the musculo-articular stiffness of the ankle joint
|
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
Capítulo | 2018 |
Evaluación del nivel de actividad física mediante la rigidez musculo-articular en adultos jóvenes
|
Psicología, salud y educación |
Artículo | 2017 |
Design for a cruciform coupon used for tensile biaxial transverse tests on composite materials
|
COMPOSITES SCIENCE AND TECHNOLOGY |
Ponencia | 2017 |
Eliminación de singularidades en ensayos estándar de materiales compuestos
|
Materiales Compuestos |
Capítulo | 2016 |
Failure models for composite joints: An approach based on singular stress states
|
Modeling Damage, Fatigue and Failure of Composite Materials |
Ponencia | 2016 |
Numerical and experimental study on the failure of non-conventional laminates
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
Artículo | 2016 |
Tensile and shear strength of bimaterial interfaces within composite materials
|
COMPOSITES SCIENCE AND TECHNOLOGY |
Artículo | 2015 |
Evaluation of the stiffnesses of the Achilles tendon and soleus from the apparent stiffness of the triceps surae
|
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE |
Artículo | 2015 |
Failure initiation criterion in bonded joints with composites based on singularity parameters and practical procedure for design purposes
|
COMPOSITE INTERFACES |
Editorial | 2015 |
Guest editorial
|
COMPOSITE INTERFACES |
Artículo | 2015 |
Influence of the size and depth of a circumferential notch on the impact behavior of streetlights. A passive-safety concept
|
ENGINEERING FAILURE ANALYSIS |
Ponencia | 2015 |
Manufacturing and testing of a cruciform coupon for biaxial transverse tests
|
ICCM International Conferences on Composite Materials |
Ponencia | 2015 |
Normal and shear strength of bimaterial joints using modified geometries of the tensile and iosipescu specimens
|
ICCM International Conferences on Composite Materials |
Ponencia | 2014 |
A practical approach to use singular stress states in the design of composite adhesive joints
|
16th European Conference on Composite Materials, ECCM 2014 |
Artículo | 2014 |
Fatigue crack initiation and damage characterization in Brazilian test specimens for adhesive joints
|
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY |
Artículo | 2013 |
A critical study on the experimental determination of stiffness and viscosity of the human triceps surae by free vibration methods
|
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE |
Ponencia | 2013 |
Design of transverse biaxial tensile tests on cruciform specimens
|
ICCM International Conferences on Composite Materials |
Ponencia | 2013 |
Notched-butt test for the determination of adhesion strength at bimaterial interfaces
|
ICCM International Conferences on Composite Materials |
Artículo | 2012 |
A least squares procedure for the evaluation of multiple generalized stress intensity factors at 2D multimaterial corners by BEM
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
Ponencia | 2012 |
Biaxial testing of composites in uniaxial machines: Manufacturing of a device, analysis of the specimen geometry and preliminary experimental results
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
Artículo | 2012 |
Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part I: Test proposal and numerical analysis
|
ENGINEERING FRACTURE MECHANICS |
Artículo | 2012 |
Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part II: Experimental results
|
ENGINEERING FRACTURE MECHANICS |
Ponencia | 2011 |
A modified Brazilian test for the generalized-fracture-toughness determination in multimaterial corners. Numerical and experimental results
|
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011 |
Artículo | 2011 |
Evaluation of shear flow in composite wind turbine blades
|
COMPOSITE STRUCTURES |
Artículo | 2011 |
In vivo measurement of stiffness and viscosity of sural triceps.
|
Revista Portuguesa de Ciências do Desporto |
Ponencia | 2011 |
Influence of the curing method on the failure of composite adhesive joints
|
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011 |
Artículo | 2011 |
Notched-Butt Test for the Determination of Adhesion Strength at Bimaterial Interfaces
|
COMPOSITE INTERFACES |
Artículo | 2011 |
Representativity of thermal stresses in designing composite joints based on singular stress states at multimaterial corners
|
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING |
Ponencia | 2011 |
Toughness determination in composite multimaterial closed corners
|
ICCM International Conferences on Composite Materials |
Artículo | 2011 |
Uso del método de los elementos finitos en la resolución de problemas tensionales asociados a las uniones soldadas
|
Soldadura y Tecnologías de Unión |
Ponencia | 2011 |
WBM contamination monitoring while sampling formation water with formation testers: A novel approach
|
Proceedings of the Annual Offshore Technology Conference |
Artículo | 2010 |
Characterization and evolution of matrix and interface related damage in [0/90](s) laminates under tension. Part II: Experimental evidence
|
COMPOSITES SCIENCE AND TECHNOLOGY |
Artículo | 2010 |
Polímeros para la señalización vertical y seguridad pasiva en la carretera
|
Carreteras |
Artículo | 2010 |
Prediction of welding residual stresses and displacements by simplified models. Experimental validation
|
MATERIALS & DESIGN |
Artículo | 2009 |
Computing stress singularities in transversely isotropic multimaterial corners by means of explicit expressions of the orthonormalized Stroh-eigenvectors
|
ENGINEERING FRACTURE MECHANICS |
Ponencia | 2009 |
Evaluation of the elastic Energy Release Rates of transverse and delamination cracks in [0/90] carbon-epoxy symmetric laminates
|
ICCM International Conferences on Composite Materials |
Artículo | 2009 |
Representativity of the singular stress state in the failure of adhesively bonded joints between metals and composites
|
COMPOSITES SCIENCE AND TECHNOLOGY |
Artículo | 2009 |
Study of fatigue damage in wind turbine blades
|
ENGINEERING FAILURE ANALYSIS |
Artículo | 2008 |
Empleo de modelos simplificados para la simulación de los efectos mecánicos asociados a la ejecución de uniones soldadas
|
Soldadura y Tecnologías de Unión |
Artículo | 2008 |
Singularity parameter determination in adhesively bonded lap joints for use in failure criteria
|
COMPOSITES SCIENCE AND TECHNOLOGY |
Artículo | 2008 |
Study of damage and repair of blades of a 300kW wind turbine
|
ENERGY |
Artículo | 2007 |
Estados singulares de tensión en esquinas multimateriales
|
Anales de Mecánica de la Fractura |
Artículo | 2007 |
Estudio de los daños por fatiga en palas de aerogenerador
|
Anales de Mecánica de la Fractura |
Ponencia | 2003 |
A general procedure for a singularity analysis of anisotropic elastic multimaterial corners. Application to adhesive joints
|
44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference |
Artículo | 2003 |
Singularity analysis of anisotropic multimaterial corners
|
INTERNATIONAL JOURNAL OF FRACTURE |
Capítulo | 2002 |
Sobre el empleo del método del punto caliente (Hot Spot Stress) en el análisis a fatiga de construcciones soldadas
|
Vigesimoquinto aniversario : decimocuartas Jornadas Técnicas de Soldadura : conferencias : [Madrid, 4, 5, 6 de junio de 2002, Consejo Superior de Investigaciones Científicas] |