| Artículo | 2022 |
Approach to the fatigue and cellular behavior of superficially modified porous titanium dental implants.
|
MATERIALS |
| Resumen congreso | 2022 |
Aproximación al comportamiento a fatiga y celular de implantes dentales de titanio poroso superficialmente modificados
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Bioactive bilayer glass coating on porous titanium substrates with enhanced biofunctional and tribomechanical behavior
|
COATINGS |
| Resumen congreso | 2022 |
Diseño, Fabricación y caracterización de un nuevo implante dental con gradiente de porosidad y modificación superficial personalizada
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2021 |
Biofunctionalization of porous Ti substrates coated with Ag nanoparticles for potential antibacterial behavior
|
METALS |
| Artículo | 2021 |
Fabrication and characterization of superficially modified porous dental implants
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2021 |
Influence of the porosity and type of bioglass on the micro-mechanical and bioactive behavior of coated porous titanium substrates
|
JOURNAL OF NON-CRYSTALLINE SOLIDS |
| Artículo | 2021 |
Synergistic effect of rhbmp‐2 protein and nanotextured titanium alloy surface to improve osteogenic implant properties
|
METALS |
| Artículo | 2021 |
Synthesis and deposition of silver nanoparticles on porous titanium substrates for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2020 |
Advanced titanium scaffolds obtained by directional freeze-drying: on the influence of processing conditions
|
Frontiers in Bioengineering and Biotechnology |
| Artículo | 2020 |
Biofunctional and tribomechanical behavior of porous titanium substrates coated with a bioactive glass bilayer (45S5-1393)
|
ACS APPLIED MATERIALS & INTERFACES |
| Ponencia | 2020 |
Desarrollo de andamios mediante bioimpresión 3D con un uso potencial en Ingeniería de Tejidos
|
Proceedings from the 24th International Congress on Project Engineering. Comunicaciones presentadas al XXIV Congreso Internacional de Ingeniería de Proyectos, celebrado en Alcoy del 7 al 9 de julio de 2020. |
| Revisión | 2020 |
Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders
|
Journal of Manufacturing Processes |
| Otros | 2020 |
Mirada microscópica de los materiales: metalografía de aceros
|
Portal De Realidad Extendida de la Universidad de Sevilla |
| Artículo | 2020 |
Porous titanium cylinders obtained by the freeze- casting technique: Influence of process parameters on porosity and mechanical behavior
|
METALS |
| Artículo | 2020 |
Porous titanium substrates coated with a bilayer of bioactive glasses
|
JOURNAL OF NON-CRYSTALLINE SOLIDS |
| Capítulo | 2020 |
Síntesis e inmovilización de nanopartículas de plata sobre substratos de titanio poroso con potencial uso en materiales implantables
|
La investigación de hoy, el futuro de mañana |
| Artículo | 2019 |
Bacterial behavior on coated porous titanium substrates for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2019 |
Balancing biofunctional and biomechanical properties using porous titanium reinforced by carbon nanotubes
|
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A |
| Artículo | 2019 |
Balancing porosity and mechanical properties of titanium samples to favor cellular growth against bacteria
|
METALS |
| Artículo | 2019 |
Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2019 |
Directed irradiation synthesis as an advanced plasma technology for surface modification to activate porous and “as-received” titanium surfaces
|
METALS |
| Artículo | 2019 |
Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique
|
APPLIED SCIENCES-BASEL |
| Artículo | 2019 |
Porous titanium surfaces to control bacteria growth: mechanical properties and sulfonated polyetheretherketone coatings as antibiofouling approaches
|
METALS |
| Artículo | 2019 |
Síntesis e inmovilización de nanopartículas de plata sobre substratos de titanio poroso con potencial uso en materiales implantables
|
Iatreia |
| Artículo | 2019 |
Titanium-castor oil based polyurethane composite foams for bone tissue engineering
|
Journal of biomaterials science. Polymer ed |
| Ponencia | 2019 |
University-enterprise: a win-win relationship, from business to research
|
Engineering Education towards sustainability: approaches for institutionalization and teaching implementation : Second International Conference on Engineering Education for the 21st Century – ICEE21C 2019 |
| Ponencia | 2018 |
A simple and economical device to process Ti cylinders with elongated porosity by freeze-casting techniques: Design and manufacturing
|
Key engineering materials |
| Artículo | 2018 |
Bioactive coatings on porous titanium for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Electrophoretic deposition of chitosan/bioactive glass/silica coatings on stainless steel and WE43 Mg alloy substrates
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Improvement of the balance between a reduced stress shielding and bone rit ingrowth by bioactive coatings onto porous titanium substrates
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Preparation and characterization of titanium-segmented polyurethane composites for bone tissue engineering
|
JOURNAL OF BIOMATERIALS APPLICATIONS |
| Artículo | 2018 |
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2017 |
Electrophoretic deposition and characterization of chitosan/bioactive glass composite coatings on Mg alloy substrates
|
ELECTROCHIMICA ACTA |
| Artículo | 2017 |
Processing and characterization of surrogate nuclear materials with controlled radial porosity
|
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY |
| Artículo | 2017 |
Sol-gel deposition of bioactive hydroxyapatite on porous titanium
|
Revista Cubana de Investigaciones Biomédicas |
| Artículo | 2016 |
Design, processing and characterization of advanced titanium scaffolds with controlled radial porosity: a new sequential compaction device
|
Frontiers in Bioengineering and Biotechnology |
| Artículo | 2016 |
Design, processing and characterization of materials with controlled radial porosity for biomedical and nuclear applications
|
Key engineering materials |
| Artículo | 2016 |
Design, processing and characterization of titanium with radial graded porosity for bone implants
|
MATERIALS & DESIGN |
| Ponencia | 2016 |
Electrophoretic deposition of PEEK/45S5 bioactive glass coating on porous titanium substrate: Influence of processing conditions and porosity parameters
|
Key engineering materials |
| Artículo | 2016 |
Fabrication and characterization of CeO2 pellets for simulation of nuclear fuel
|
NUCLEAR ENGINEERING AND DESIGN |
| Artículo | 2016 |
Titanium scaffolds with multi-scale porosity obtained by controlled chemical and electrochemical treatments of porous solids from PM space holder technique
|
Frontiers in Bioengineering and Biotechnology |
| Artículo | 2015 |
Comportamiento Micro-Mecánico y Simulación Numérica de Titanio con Porosidad Gradiente para Aplicaciones Biomédicas
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
Development of new titanium implants with longitudinal gradient porosity by space-holder technique
|
JOURNAL OF MATERIALS SCIENCE |
| Ponencia | 2015 |
Diseño, procesado y caracterización de materiales con porosidad radial controlada para aplicaciones nucleares
|
Anales de Mecánica de la Fractura |
| Ponencia | 2015 |
Electrophoretic deposition and characterization of chitosan/45S5 bioactive glass composite coatings on porous titanium for biomedical applications
|
Key engineering materials |
| Artículo | 2015 |
On the influence of space holder in the development of porous titanium implants: Mechanical, computational and biological evaluation
|
MATERIALS CHARACTERIZATION |
| Ponencia | 2014 |
Design, Fabrication and Characterization of Titanium with Graded Porosity by using Space-holder Technique
|
Procedia Materials Science |
| Artículo | 2014 |
Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions
|
MATERIALS & DESIGN |
| Artículo | 2014 |
Development of porous titanium for biomedical applications: A comparison between loose sintering and space-holder techniques
|
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS |
| Artículo | 2013 |
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta) (C,N)-based cermets
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Ponencia | 2013 |
Processing and Characterization of Porous Titanium Powder Metallurgy for Implants and Joint Replacements
|
5TH LATIN AMERICAN CONGRESS ON BIOMEDICAL ENGINEERING (CLAIB 2011): SUSTAINABLE TECHNOLOGIES FOR THE HEALTH OF ALL, PTS 1 AND 2 |
| Ponencia | 2013 |
Titanium for Biomedical Application with Radial Graded Porosity: Development of a Novel Compaction Device
|
2013 PAN AMERICAN HEALTH CARE EXCHANGES (PAHCE) |
| Artículo | 2012 |
Processing and characterization of porous titanium for implants by using NaCl as space holder
|
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
| Artículo | 2012 |
Processing, characterization and biological testing of porous titanium obtained by space-holder technique
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 2011 |
Consolidation by electrical resistance sintering of Ti powder
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 2011 |
Conventional Powder Metallurgy Process and Characterization of Porous Titanium for Biomedical Applications
|
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE |
| Ponencia | 2011 |
Development of titanium implants with graded porosity by conventional powder metallurgy: A stress shielding alternative
|
24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials |
| Ponencia | 2011 |
Processing and characterization of titanium porous implants by powder metallurgy: Conventional and space-holder techniques
|
24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials |
| Artículo | 2011 |
Simplified PM processing of mechanically alloyed aluminium
|
POWDER METALLURGY |
| Artículo | 2010 |
Influence of sintering conditions on the microstructural and mechanical properties of porous Ti c.p. for biomedical applications
|
Anales de Mecánica de la Fractura |
| Artículo | 2010 |
Processing of mechanically alloyed aluminum powder: A metallographic study
|
MATERIALS CHARACTERIZATION |
| Artículo | 2009 |
Increasing the ductility and strength of submicrometer-grained P/M aluminium
|
JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2009 |
Premature fracture in automobile leaf springs
|
ENGINEERING FAILURE ANALYSIS |
| Ponencia | 2008 |
Changes in Particle Size and Crystallinity in Ground Nickel Powder
|
Materials Science Forum |
| Artículo | 2007 |
Fractura Prematura de Ballestas de Vehículos Automóviles
|
Anales de Mecánica de la Fractura |
| Artículo | 2007 |
Intermetallic effects on the ductility of sintered aluminium
|
Materials Science Forum |
| Artículo | 2007 |
Obtención y procesado de aleaciones de grano ultrafino, nanométrico y amorfas mediante aleado mecánico
|
Revista de metalurgia |
| Artículo | 2006 |
Electrical Resistance Sintering of M.A. Al-5AlN Powders
|
Materials Science Forum |
| Artículo | 2006 |
Green and sintered properties of consolidated mixtures of mechanically alloyed and elemental Al powders
|
Materials Science Forum |
| Artículo | 2006 |
Mejora en las Propiedades Mecánicas del Aluminio AM Pulvimetalúrgico
|
Anales de Mecánica de la Fractura |
| Artículo | 2006 |
Rotura retardada del acero inoxidable 17-7
|
Anales de Mecánica de la Fractura |
| Artículo | 2005 |
Comportamiento mecánico de materiales de aluminio am sinterizados
|
Anales de Mecánica de la Fractura |
| Artículo | 2005 |
Electrical conductivity of sintered powder compacts
|
POWDER METALLURGY |
| Artículo | 2005 |
Influence of milling conditions on the wear resistance of mechanically alloyed aluminium
|
WEAR |
| Ponencia | 2005 |
Properties of two PM nitride-reinforced Al matrix composites
|
Euro PM 2005: Powder Metallurgy Congress and Exhibition |
| Artículo | 2004 |
Effective pressure on powders under triaxial compression
|
MATERIALS LETTERS |
| Artículo | 2003 |
Consolidación de polvo de hierro mediante sinterización por resistencia eléctrica
|
Revista de metalurgia |
| Artículo | 2003 |
Effect of Mg as sintering additive on the consolidation of mechanically alloyed Al powder
|
Materials Science Forum |
| Artículo | 2003 |
Effective pressure on powders under uniaxial compression
|
JOURNAL OF MATERIALS SCIENCE LETTERS |
| Artículo | 2003 |
Influencia de la adición de Mg en la rotura a tracción de sinterizados de al AM
|
Anales de Mecánica de la Fractura |
| Artículo | 2003 |
Naturaleza de las bolas de molienda y ductilidad de compactos de al AM
|
Anales de Mecánica de la Fractura |
| Artículo | 2003 |
Sintering of Al/AlN composite powder obtained by gas-solid reaction milling
|
SCRIPTA MATERIALIA |
| Artículo | 2003 |
Structure and properties of consolidated attrition-milled Al-5%Ti PM specimens
|
Materials Science Forum |
| Artículo | 2003 |
Thermal and electrical conductivities of sintered powder compacts
|
POWDER METALLURGY |
| Artículo | 2003 |
Wear of aluminium-base materials processed by mechanical milling in air or ammonia
|
WEAR |
| Artículo | 2002 |
Compactos sinterizados de Al-1%Ni AM y su comportamiento a la rotura
|
Anales de Mecánica de la Fractura |
| Artículo | 2002 |
Comportamiento a fractura de aluminio aleado necánicamente con sinterabilidad mejorada
|
Anales de Mecánica de la Fractura |
| Artículo | 2002 |
Failure of gas turbine blades
|
WEAR |
| Artículo | 2002 |
Sintetización por resistencia eléctrica
|
Deformacion Metalica |
| Artículo | 2001 |
Dry and lubricated wear resistance of mechanically-alloyed aluminium-base sintered composites
|
WEAR |
| Artículo | 2001 |
Fracturas de muestras de aluminio sinterizado endurecido por molienda reactiva
|
Anales de Mecánica de la Fractura |
| Artículo | 2001 |
Rotura de probetas sinterizadas de al AM con adición de silicio
|
Anales de Mecánica de la Fractura |
| Artículo | 2001 |
Simplificación del procesado de polvo de aluminio molido y estudio de las propiedades mecánicas de los compactos resultantes
|
Revista de metalurgia |
| Ponencia | 2000 |
Fractographic characterization of Al-Al3Ti samples produced by mechanical-alloying
|
ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS |
| Artículo | 1997 |
Structure and properties of attrition-milled aluminium powder
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 1996 |
Consolidation of mechanically alloyed aluminium by double cold-pressing and sintering
|
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
| Artículo | 1995 |
An alternative route to the consolidation of mechanically alloyed aluminum powder
|
MATERIALS TRANSACTIONS JIM |
| Artículo | 1995 |
Simplificación de la enseñanza de las microestructuras básicas de los metales
|
Revista de Enseñanza Universitaria |
