| Artículo | 2025 |
Influence of the bonding method on interlaminar fracture toughness for composite material non-symmetric configurations
|
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES |
| Artículo | 2024 |
A closed-form expression derived from virtual testing for structural optimization of L-flange bolted connections
|
ENGINEERING FAILURE ANALYSIS |
| Artículo | 2024 |
Closed-form methodology for the structural analysis of stiffened composite plates with cutouts and non-uniform lay-up
|
COMPOSITE STRUCTURES |
| Capítulo | 2023 |
A modeling framework for the analysis of instabilities and delamination in composite shells
|
Computational and Experimental Methods in Structures |
| Capítulo | 2023 |
Damage simulations in composite structures in the presence of stress gradients
|
Modeling Damage, Fatigue and Failure of Composite Materials: A volume in Woodhead Publishing Series in Composites Science and Engineering, Second Edition |
| Artículo | 2022 |
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials
|
COMPOSITE STRUCTURES |
| Ponencia | 2022 |
Effect of geometrical imperfections on the instability behaviour of cylindrical steel shells for application in the design of windturbine towers
|
Congress on NumericalMethods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria) |
| Artículo | 2021 |
Closed-form methodology for the bending of symmetric composite plates with cutouts and non-uniform lay-up
|
COMPOSITE STRUCTURES |
| Capítulo | 2021 |
Joining of PMC to Concrete for Structural Applications
|
Encyclopedia of Materials: Composites |
| Ponencia | 2020 |
A procedure for the estimation of the shape imperfections of a composite panel in order to reproduce its postbuckling evolution
|
ECCM 2018 - 18th European Conference on Composite Materials |
| Revisión | 2020 |
Review of recent developments and induced damage assessment in the modelling of the machining of long fibre reinforced polymer composites
|
COMPOSITE STRUCTURES |
| Artículo | 2019 |
Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up
|
COMPOSITE STRUCTURES |
| Artículo | 2019 |
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM
|
THEORETICAL AND APPLIED FRACTURE MECHANICS |
| Artículo | 2019 |
Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures
|
Mechanics of Advanced Materials and Structures |
| Artículo | 2018 |
A new in situ peeling test for the characterisation of composite bonded joints
|
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING |
| Artículo | 2018 |
Overview of Gc Tests Used to Evaluate Composite–Composite Adhesive Joints
|
JOURNAL OF MULTISCALE MODELING |
| Artículo | 2018 |
The effect of residual thermal stresses on transverse cracking in cross-ply laminates: an application of the coupled criterion of the finite fracture mechanics
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Artículo | 2017 |
A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Artículo | 2017 |
A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates
|
COMPOSITES PART B-ENGINEERING |
| Ponencia | 2017 |
Effect of residual thermal stresses in the coupled criterion. An application to transverse cracking in cross-ply laminates
|
ICF 2017 - 14th International Conference on Fracture |
| Artículo | 2017 |
Ensayos de pull-off sobre probetas con rigidizadores en T
|
Materiales Compuestos |
| Artículo | 2017 |
Ensayos numéricos de uniones adhesivas composite-composite para la determinación de la tenacidad a la fractura
|
Materiales Compuestos |
| Artículo | 2017 |
Experimental failure investigation of pull-off tests of single T-stiffened composite specimens
|
COMPOSITE STRUCTURES |
| Ponencia | 2016 |
A finite thickness interface element for composite delamination
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Artículo | 2016 |
A new analytical model for evaluating interlaminar stresses in the unfolding failure of composite laminates
|
COMPOSITE STRUCTURES |
| Artículo | 2016 |
Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites
|
COMPOSITE STRUCTURES |
| Ponencia | 2016 |
Damage simulations in a composite Ω-stiffened panel in postbuckling regime
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Capítulo | 2016 |
Damage simulations in composite structures in the presence of stress gradients
|
Modeling Damage, Fatigue and Failure of Composite Materials |
| Artículo | 2016 |
Damage tolerance of composite runout panels under tensile loading
|
COMPOSITES PART B-ENGINEERING |
| Artículo | 2016 |
Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element
|
COMPOSITE STRUCTURES |
| Ponencia | 2016 |
Modelling thermal deformations in curved composite laminates using standard shell finite elements
|
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials |
| Artículo | 2016 |
Modelo de interfase elastica lineal fragil (MIELF) aplicado a problemas tridimensionales con crecimiento de grietas en modo mixto
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
A linear elastic-brittle interface model: application for the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads
|
INTERNATIONAL JOURNAL OF FRACTURE |
| Ponencia | 2015 |
Experimental postbuckling study of pre-conformed composite plates
|
ICCM International Conferences on Composite Materials |
| Ponencia | 2014 |
Analytic evaluation of radial stresses in unfolding failure of composite materials. Comparison with numerical solutions
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Analytical and numerical models for predicting unfolding failure in composite beams
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Composite plates modeling strategies for the estimation of transverse stresses
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Failure analysis of a CFRP run-out configuration with butt-strap joint
|
16th European Conference on Composite Materials, ECCM 2014 |
| Ponencia | 2014 |
Failure analysis of skin-stringer interfaces
|
16th European Conference on Composite Materials, ECCM 2014 |
| Artículo | 2014 |
Transverse crack onset and growth in cross-ply [0/90](s) laminates under tension. Application of a coupled stress and energy criterion
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Artículo | 2013 |
A composite runout specimen subjected to tension-compression loading conditions: Experimental and global-local finite element analysis
|
COMPOSITE STRUCTURES |
| Ponencia | 2013 |
Postbuckling analysis of a composite cylindrical panel with frames and omega stringers
|
ICCM International Conferences on Composite Materials |
| Ponencia | 2012 |
Analysis of a stringer run-out concept including damage initiation and evolution at the interfaces
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Artículo | 2012 |
Energy-based delamination theory for biaxial loading in the presence of thermal stresses
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2012 |
Estudio de grietas transversales y de delaminación en laminados simétricos [0/90] de material compuesto usando la formulación de interfase elástica lineal-frágil
|
Anales de Mecánica de la Fractura |
| Artículo | 2012 |
Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces
|
COMPOSITES PART B-ENGINEERING |
| Ponencia | 2012 |
On the use of three dimensional material laws in the analyses of Functionally Graded shells
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Artículo | 2012 |
Postbuckling behavior of a pressurized stiffened composite panel - Part II: Numerical analysis. Effect of the geometrical imperfections
|
COMPOSITE STRUCTURES |
| Artículo | 2012 |
Postbuckling behaviour of a pressurized stiffened composite panel - Part I: Experimental study
|
COMPOSITE STRUCTURES |
| Ponencia | 2012 |
Size effect on transverse crack initiation in cross-ply laminates. Application of a coupled stress and energy criterion
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Ponencia | 2012 |
Study of transverse and delamination cracks in [0/90] symmetric laminates by means of the classical LEFM and the linear elastic brittle interface formulation
|
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials |
| Ponencia | 2011 |
Aplicación de un criterio acoplado de tensión y energía al inicio de una grieta transversal en laminados [0m, 90n]s sometidos a tensión longitudinal
|
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011 |
| Artículo | 2011 |
Caracterización del inicio y crecimiento de grietas de interfaz entre fibra y matriz bajo cargas transversales biaxiales usando el modelo de interfaz elástica lineal-frágil
|
Anales de Mecánica de la Fractura |
| Artículo | 2011 |
Effect of numerical artificial corners appearing when using BEM on contact stresses
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Ponencia | 2011 |
Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test
|
Procedia Engineering |
| Ponencia | 2011 |
Influence of transverse properties in the modeling of debond propagation in single carbon fiber composites
|
COMPOSITE MATERIALS FOR STRUCTURAL PERFORMANCE: TOWARDS HIGHER LIMITS |
| Artículo | 2010 |
Analytical and Numerical Models of Postbuckling of Orthotropic Symmetric Plates
|
JOURNAL OF ENGINEERING MECHANICS-ASCE |
| Artículo | 2010 |
Characterization and evolution of matrix and interface related damage in [0/90](s) laminates under tension. Part I: Numerical predictions
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2010 |
Characterization and evolution of matrix and interface related damage in [0/90](s) laminates under tension. Part II: Experimental evidence
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2009 |
BEM analysis of damage progress in 0/90 laminates
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Ponencia | 2009 |
Delamination model for cross-ply laminates subject to biaxial loading and thermal stresses
|
ICCM International Conferences on Composite Materials |
| Artículo | 2009 |
Effects of the stress state generated during the manufacturing process of copper anodes on the moulds: Warping and cracking
|
ENGINEERING FAILURE ANALYSIS |
| Ponencia | 2009 |
Evaluation of the elastic Energy Release Rates of transverse and delamination cracks in [0/90] carbon-epoxy symmetric laminates
|
ICCM International Conferences on Composite Materials |
| Artículo | 2009 |
Fabrication stresses inducing cracking of a mould made of copper
|
ENGINEERING FAILURE ANALYSIS |
| Artículo | 2009 |
On the necessity of non-conforming algorithms for 'small displacement' contact problems and conforming discretizations by BEM
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2008 |
Stress state characterization of delamination cracks in [0/90] symmetric laminates by BEM
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Capítulo | 2007 |
Problemas de contacto en el estudio del daño en materiales compuestos fibrosos
|
Avances en mecánica de medios continuos : simposium en honor al profesor J.A. Garrido García |
| Artículo | 2006 |
Application of BEM to generalized plane problems for anisotropic elastic materials in presence of contact
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Artículo | 2006 |
Singular stress fields and instability conditions for mode-II and mixed-mode loaded cracks
|
Strength, Fracture and Complexity |
| Ponencia | 2006 |
Singular stress fields situations in mode-ii and mixed-mode loaded cracks
|
Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture |
| Artículo | 2005 |
Campos de tensión singulares y condiciones de inestabilidad en modo-II
|
Anales de Mecánica de la Fractura |
| Artículo | 2005 |
Weak formulation of axi-symmetric frictionless contact problems with boundary elements application to interface cracks
|
COMPUTERS & STRUCTURES |
| Artículo | 2004 |
Caracterización del daño de acuerdo a la mecánica de la fractura en laminados 0/90
|
Anales de Mecánica de la Fractura |
| Libro | 2004 |
Estructuras de acero
|
Estructuras de acero |
| Libro | 2004 |
Placas
|
Placas |
| Libro | 2004 |
Teoría de estructuras, cálculo matricial, método directo de rigidez
|
Teoría de estructuras, cálculo matricial, método directo de rigidez |
| Artículo | 2002 |
Comparing the conventional displacement BIE and the BIE formulations of the first and second kind in frictionless contact problems
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Ponencia | 2002 |
Comparing the conventional displacement, first-kind and second-kind BIEs in frictionless contact problems
|
BOUNDARY ELEMENTS XXIV: INCORPORATING MESHLESS SOLUTIONS |
| Artículo | 2000 |
Sobre los criterios de agotamiento de uniones en ángulo sometidas a solicitaciones estáticas
|
Soldadura y Tecnologías de Unión |
| Ponencia | 1998 |
A comparison between non-conforming node-to-point and weak approaches in contact problems by BEM
|
BOUNDARY ELEMENTS XX |
| Artículo | 1998 |
BEM solution of two-dimensional contact problems by weak application of contact conditions with nonconforming discretizations
|
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
| Artículo | 1998 |
Interpretation of the problems found in applying contact conditions in node-to-point schemes with boundary element non-conforming discretizations
|
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
| Ponencia | 1997 |
Influence of the location of the contact point in node-to-point contact approaches using non conforming boundary element discretizations
|
CONTACT MECHANICS III |
| Artículo | 1996 |
A simplified numerical analysis of residual stresses in aluminum welded plates
|
COMPUTERS & STRUCTURES |
| Artículo | 1996 |
On the removal of rigid body motions in the solution of elastostatic problems by direct BEM
|
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING |
| Capítulo | 1996 |
Un algoritmo variacional basado en el MEC para resolver problemas de contacto con discretizaciones no conformes
|
Métodos numéricos en ingeniería : [comunicaciones presentadas al III Congreso de Métodos Numéricos en Ingeniería, celebrado en Zaragoza durante los días 3-6 de junio de 1996] |
| Ponencia | 1995 |
Analysis of singularities in composite materials by BEM
|
BOUNDARY ELEMENTS XVII |
| Ponencia | 1995 |
Contact problems testing composite materials by the boundary element method
|
CONTACT MECHANICS II |
| Artículo | 1995 |
Contact problems with nonconforming discretizations using boundary-element method
|
COMPUTERS & STRUCTURES |
| Ponencia | 1994 |
Frictional contact problems with non-conforming discretizations using BEM
|
BOUNDARY ELEMENT METHOD XVI |
| Artículo | 1994 |
On the displacement and load scaling techniques in contact problems using bem
|
Boundary Element Communications |
| Ponencia | 1992 |
An algorithm for frictionless contact problems with non-conforming discretizations using BEM
|
BOUNDARY ELEMENTS XIV, VOL 2 |
| Artículo | 1992 |
Aplicación del método de los elementos de contorno al problema de contacto sin fricción utilizando discretizaciones no conformes
|
Anales de Ingeniería Mecánica |
