PMS - Prisma - Unidad de Bibliometría

PROPIEDADES MECÁNICAS DE SÓLIDOS - FQM-163 (PMS)

Tipo de colectivo: Grupo de investigación
Estado: Grupo definitivo
Ámbito: Andalucía
Instituciones: Universidad de Sevilla
Fecha de creación: 01/01/1995

Investiga en

Tipo Año Título Fuente
Artículo2024 A practical analysis to predict sample overheating in flash experiments using the current ramp methodology JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Artículo2024 Al2O3/Y3Al5O12 (YAG)/ZrO2 composites by single-step powder synthesis and spark plasma sintering JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2024 BN nanosheets reinforced zirconia composites: an in-depth microstructural and mechanical study JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2024 Expanding the scope of multiphase-flash sintering: Multi-dogbone configurations and reactive processes CERAMICS INTERNATIONAL
Artículo2024 Fine-grained BCZT piezoelectric ceramics by combining high-energy mechanochemical synthesis and hot-press sintering JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2024 Influence of graphene-based nanostructures processing routes and aspect ratio in flexural strength and fracture mechanisms of 3Y-TZP-matrix composites CERAMICS INTERNATIONAL
Artículo2024 Influence of the atmosphere on the formation of high-entropy oxides within the Co–Cu–Fe–Mg–Mn–Ni–O system via reactive flash sintering CERAMICS INTERNATIONAL
Artículo2024 Microhardness and wear behavior of nanodiamond-reinforced nanocomposites for dental applications Polymer Composites
Artículo2024 On the athermal origin of flash sintering: Separating field-induced effects from Joule heating using a current ramp approach SCRIPTA MATERIALIA
Artículo2024 Structural, Mössbauer and magnetic study of (Mn0.2Co0.2Ni0.2Cu0.2X0.2)Fe2O4 (X=Fe, Mg) spinel high-entropy oxides fabricated via reactive flash sintering JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Revisión2023 An overview of polymeric composite scaffolds with piezoelectric properties for improved bone regeneration MATERIALS & DESIGN
Artículo2023 Electrical performance of orthotropic and isotropic 3YTZP composites with graphene fillers JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2023 Influence of AC fields and electrical conduction mechanisms on the flash-onset temperature: Electronic (BiFeO3) vs. ionic conductors (8YSZ) CERAMICS INTERNATIONAL
Artículo2023 R-curve evaluation of 3YTZP/graphene composites by indirect compliance method JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2022 A novel Multi‐Phase Flash Sintering (MPFS) technique for 3D complex‐shaped ceramics APPLIED MATERIALS TODAY
Artículo2022 Ageing-resistant zirconia/graphene-based nanostructures composites for use as biomaterials JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2022 Electrical, thermo-electrical, and electromagnetic behaviour of epoxy composites reinforced with graphene nanoplatelets with different average surface area POLYMERS
Artículo2022 Graphene nanoplatelets electrical networks as highly efficient self-heating materials for glass fiber fabrics JOURNAL OF INDUSTRIAL TEXTILES
Artículo2022 Highly efficient electrical discharge machining of yttria-stabilized zirconia ceramics with graphene nanostructures as fillers JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2021 A first insight into the microstructure and crack propagation in novel boron nitride nanosheet/3YTZP composites BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2021 Critical influence of the processing route on the mechanical properties of zirconia composites with graphene nanoplatelets MATERIALS
Artículo2021 Enhancing the electrical conductivity of in-situ reduced graphene oxide-zirconia composites through the control of the processing routine CERAMICS INTERNATIONAL
Artículo2021 Influence of the porosity and type of bioglass on the micro-mechanical and bioactive behavior of coated porous titanium substrates JOURNAL OF NON-CRYSTALLINE SOLIDS
Artículo2021 Synthesis and deposition of silver nanoparticles on porous titanium substrates for biomedical applications SURFACE & COATINGS TECHNOLOGY
Artículo2021 Unravelling the optimization of few-layer graphene crystallinity and electrical conductivity in ceramic composites by Raman spectroscopy JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2020 Development of a tinbtamozr-based high entropy alloy with low young´s modulus by mechanical alloying route METALS
Artículo2020 Electrochemically exfoliated graphene-like nanosheets for use in ceramic nanocomposites MATERIALS
Artículo2020 Flexure strength and fracture propagation in zirconia ceramic composites with exfoliated graphene nanoplatelets Ceramics
Artículo2020 Influence of manufacturing parameters and post processing on the electrical conductivity of extrusion-based 3D printed nanocomposite parts POLYMERS
Otros2020 Mirada microscópica de los materiales: metalografía de aceros Portal De Realidad Extendida de la Universidad de Sevilla
Artículo2020 Monitoring crack propagation in skin-stringer elements using carbon nanotube doped adhesive films: Influence of defects and manufacturing process COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2020 Printable self-heating coatings based on the use of carbon nanoreinforcements Polymer Composites
Artículo2020 Sensitive response of GNP/epoxy coatings as strain sensors: Analysis of tensile-compressive and reversible cyclic behavior SMART MATERIALS AND STRUCTURES
Artículo2020 Tunable structure and connectivity of organosilica hybrid films by using different epoxy based precursors in atmospheric plasma deposition APPLIED SURFACE SCIENCE
Artículo2019 An approach using highly sensitive carbon nanotube adhesive films for crack growth detection under flexural load in composite structures COMPOSITE STRUCTURES
Artículo2019 Effect of graphene nanoplatelets thickness on strain sensitivity of nanocomposites: A deeper theoretical to experimental analysis COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2019 Evaluation of sensitivity for detecting different failure modes of epoxy matrix composites doped with graphene nanoparticles COMPOSITE STRUCTURES
Artículo2019 Graphene nanoplatelets for electrically conductive 3YTZP composites densified by pressureless sintering JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2019 Hydrothermal ageing of graphene/carbon nanotubes/epoxy hybrid nanocomposites POLYMER DEGRADATION AND STABILITY
Artículo2019 Influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites POLYMER TESTING
Artículo2019 La0.59Li0.24TiO3 ceramics obtained by spark plasma sintering: electric behavior analysis MATERIALS RESEARCH EXPRESS
Artículo2019 Microstructure, interfaces and properties of 3YTZP ceramic composites with 10 and 20 vol% different graphene-based nanostructures as fillers JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2019 Modifications induced in photocuring of Bis- GMA/TEGDMA by the addition of graphene nanoplatelets for 3D printable electrically conductive nanocomposites COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2019 Porous titanium surfaces to control bacteria growth: mechanical properties and sulfonated polyetheretherketone coatings as antibiofouling approaches METALS
Artículo2019 Tribological behavior of graphene nanoplatelet reinforced 3YTZP composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2018 Carbon nanotubes and graphene into thermosetting composites: Synergy and combined effect JOURNAL OF APPLIED POLYMER SCIENCE
Ponencia2018 Crack propagation monitoring with carbon nanotube doped adhesive films on skin-stringer sub-elements 9th European Workshop on Structural Health Monitoring, EWSHM 2018
Corrección2018 Dense graphene nanoplatelet/yttria tetragonal zirconia composites: Processing, hardness and electrical conductivity (vol 43, pg 11743, 2017) CERAMICS INTERNATIONAL
Artículo2018 Electrical conduction mechanisms in graphene nanoplatelet/yttria tetragonal zirconia composites CERAMICS INTERNATIONAL
Artículo2018 High sensitive damage sensors based on the use of functionalized graphene nanoplatelets coated fabrics as reinforcement in multiscale composite materials COMPOSITES PART B-ENGINEERING
Artículo2018 Influence of Thickness and Lateral Size of Graphene Nanoplatelets on Water Uptake in Epoxy/Graphene Nanocomposites APPLIED SCIENCES-BASEL
Artículo2018 Microstructural characterization and tribological behavior of Laser Furnace processed ceramic tiles CERAMICS INTERNATIONAL
Artículo2018 Optimizing the homogenization technique for graphene nanoplatelet/yttria tetragonal zirconia composites: influence on the microstructure and the electrical conductivity JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2018 Sensitivity, influence of the strain rate and reversibility of GNPs based multiscale composite materials for high sensitive strain sensors COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2018 Spark plasma sintered zirconia ceramic composites with graphene-based nanostructures Ceramics
Artículo2018 The role of carbon nanotubes on the stability of tetragonal zirconia polycrystals CERAMICS INTERNATIONAL
Artículo2017 Dense graphene nanoplatelet/yttria tetragonal zirconia composites: Processing, hardness and electrical conductivity CERAMICS INTERNATIONAL
Artículo2017 Effect of acid-treatment and colloidal-processing conditions on the room temperature mechanical and electrical properties of 3YTZP/MWNT ceramic nanocomposites CERAMICS INTERNATIONAL
Artículo2017 Friction and wear behavior of alumina-based graphene and CNFs composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2017 Graphene nanoplatelets coated glass fibre fabrics as strain sensors COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2017 Highly sensitive strain gauges with carbon nanotubes: From bulk nanocomposites to multifunctional coatings for damage sensing APPLIED SURFACE SCIENCE
Ponencia2017 Thermal and mechanical properties of self-healing epoxy/graphene nanocomposites 8th Conference on Smart Structures and Materials, SMART 2017 and 6th International Conference on Smart Materials and Nanotechnology in Engineering, SMN 2017
Artículo2016 Electrically conductive functionalized-GNP/epoxy based composites: From nanocomposite to multiscale glass fibre composite material COMPOSITES PART B-ENGINEERING
Artículo2016 Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2016 GNPs reinforced epoxy nanocomposites used as thermal interface materials JOURNAL OF NANO RESEARCH
Artículo2016 Joule effect self-heating of epoxy composites reinforced with graphitic nanofillers JOURNAL OF POLYMER RESEARCH
Artículo2016 Obtention of Li3xLa2/3-xTiO3 ceramics from amorphous nanopowders by spark plasma sintering FERROELECTRICS
Artículo2016 Reversible phenomena and failure localization in self-monitoring GNP/epoxy nanocomposites COMPOSITE STRUCTURES
Artículo2016 Strain monitoring mechanisms of sensors based on the addition of graphene nanoplatelets into an epoxy matrix COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2016 Strain sensing based on multiscale composite materials reinforced with graphene nanoplatelets JOVE-JOURNAL OF VISUALIZED EXPERIMENTS
Ponencia2016 Structural health monitoring in multiscale composite materials: Nanoreinforced epoxy matrices and coated fabrics 8th European Workshop on Structural Health Monitoring, EWSHM 2016
Ponencia2016 Surface modification of continuous fibers with carbon nanostructures to get self-sensing capabilities 8th European Workshop on Structural Health Monitoring, EWSHM 2016
Artículo2016 Thermal conductivity and lap shear strength of GNP/epoxy nanocomposites adhesives INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
Artículo2015 Influence of the Processing Route on the Carbon Nanotubes Dispersion and Creep Resistance of 3YTZP/SWCNTs Nanocomposites JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Artículo2015 Mechanical and electrical properties of low SWNT content 3YTZP composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2015 Microstructure and impedance spectroscopy of 3YTZP/SWNT ceramic nanocomposites CERAMICS INTERNATIONAL
Artículo2015 Morphological changes on graphene nanoplatelets induced during dispersion into an epoxy resin by different methods COMPOSITES PART B-ENGINEERING
Artículo2014 Advantages and disadvantages of the addition of graphene nanoplatelets to epoxy resins EUROPEAN POLYMER JOURNAL
Artículo2014 Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis JOURNAL OF POWER SOURCES
Artículo2014 Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Ponencia2014 Epoxy adhesives modified with graphene for thermal interface materials JOURNAL OF ADHESION
Ponencia2014 Graphene nanocomposites as strain-damage sensor 16th European Conference on Composite Materials, ECCM 2014
Artículo2014 Graphene nanoplatelets thickness and lateral size influence on the morphology and behavior of epoxy composites EUROPEAN POLYMER JOURNAL
Artículo2014 Hardness and flexural strength of single-walled carbon nanotube/alumina composites JOURNAL OF MATERIALS SCIENCE
Artículo2014 Improvement of Vickers hardness measurement on SWNT/Al2O3 composites consolidated by spark plasma sintering JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2014 Influence of microstructure and crystallographic phases on the tribological properties of SiC obtained by spark plasma sintering WEAR
Ponencia2014 Thermal conductivity of GNP/epoxy nanocomposites and their application as thermal interface materials 16th European Conference on Composite Materials, ECCM 2014
Artículo2013 Correlation between plasticity and dislocation dissociation in ceramics PHILOSOPHICAL MAGAZINE
Artículo2013 Evidence of nanograin cluster coalescence in spark plasma sintered alpha-Al2O3 SCRIPTA MATERIALIA
Artículo2013 In situ processing of epoxy composites reinforced with graphene nanoplatelets COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2013 Self-stratifying and orientation of exfoliated few-layer graphene nanoplatelets in epoxy composites COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2012 Plastic deformation of dense nanocrystalline yttrium oxide at elevated temperatures JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Editorial2011 Advances in boundary lubrication and boundary surface films TRIBOLOGY INTERNATIONAL
Artículo2011 Creep behavior of TiCxN1-x-CoTi cermets synthesized by mechanically induced self-sustaining reaction JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Revisión2010 Deformation mechanisms in yttria-stabilized cubic zirconia single crystals INTERNATIONAL JOURNAL OF MATERIALS RESEARCH
Ponencia2010 High Temperature Mechanical Properties of Ti(C,N)-Co-Mo2C Cermets Mechanical properties of solids XI
Ponencia2010 Influence of thermal effects produced by laser treatment on the tribological behavior of porcelain ceramic tiles Mechanical properties of solids XI
Artículo2009 Creep mechanisms of laminated alumina/zirconia-toughened alumina composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2009 Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography SCRIPTA MATERIALIA
Artículo2008 High-temperature plastic behavior of TZP-Ni cermets JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Artículo2008 Microstructure and properties of ceramics and composites joined by plastic deformation MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Artículo2007 A general law for liquid metal-onto-ceramic wetting: An electrostatic approach JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2007 Anomalous high activation energy for creep in nanostructured 3YTZP/Ni cermets JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2007 Erosion of geopolymers made from industrial waste JOURNAL OF MATERIALS SCIENCE
Artículo2007 High-temperature deformation behavior in SrTiO3 ceramics * JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2007 Microstructural characteristics of TZP/Ni cermets plastically deformed at high temperature JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Otros2007 Papers presented at the First International Workshop on Mechanical Properties of Advanced Materials: Recent insights dedicated to Professor Arturo Dominguez-Rodriguez on the occasion of his 60th birthday - Preface JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2007 Strength enhancement of 2D-SiCf/SiC composites after static fatigue at room temperature JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2006 Fracture of composite alumina/yttria-stabilized zirconia joints JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Ponencia2006 High-temperature deformation of a geopolymer CERAMIC TRANSACTIONS
Artículo2006 High-temperature deformation of amorphous AlPO4-based nano-composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2006 Influence of oxidation on high-temperature mechanical properties of zirconia/nickel cermets Fuel Cells Bulletin
Artículo2006 Influence of oxidation on the high-temperature mechanical properties of zirconia/nickel cermets SCRIPTA MATERIALIA
Artículo2006 Self-joining of zirconia/hydroxyapatite composites using plastic deformation process ACTA BIOMATERIALIA
Artículo2006 The role of metal-ceramic interfaces on the high temperature mechanical response of nanostructured nickel-yttria tetragonal zirconia polycrystals (Ni-YTZP) JOURNAL OF MATERIALS SCIENCE
Artículo2005 Correlación entre la microestructura y el comportamiento plástico a alta temperatura de compuestos TZP-Ni (40% vol.) BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2005 Dry and oil-lubricated sliding wear of Si3N4 and Si3N4/BN fibrous monoliths TRIBOLOGY LETTERS
Artículo2005 Experimental assessment of plasticity of nanocrystalline 1.7 mol% yttria tetragonal zirconia polycrystals JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Artículo2005 Indentation hardness of biomorphic SiC INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2005 Inestabilidades dinámicas en cerámicas monocristalinas a base de circona BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2005 La importancia de la segregación de itrio en la deformación plástica de nanocristales de circonia tetragonal dopada con óxido de itrio (YTZP) BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2005 Modelización de las inestabilidades en la deformación plástica de monocristales de circona estabilizada con itria (YCSZ) BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2005 Plastic deformation of hydroxyapatites and its application to joining INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
Artículo2005 Primera evidencia experimental mediante microscopía electrónica de transmisión de la disociación de dislocaciones en el sistema TeO2 BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2005 Si3N4/BN fibrous monoliths: Mechanical properties and tribological responses MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Ponencia2005 Water lubricated sliding wear of SI3N4/BN fibrous moholiths Proceedings of the World Tribology Congress III - 2005
Artículo2004 An explanation of the high temperature creep of yttria tetragonal zirconia nanocrystals SCRIPTA MATERIALIA
Artículo2004 Creep of zirconia/nickel composites Materials Science Forum
Artículo2004 Designing for ultrahigh-temperature applications: The mechanical and thermal properties of HfB2, HfCx, HfNx, and alpha Hf(N) JOURNAL OF MATERIALS SCIENCE
Artículo2004 Erosion and strength degradation of biomorphic SiC JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2004 High temperature deformation of laminated ceramic composites obtained from the Al2O3-ZrO2 system EURO CERAMICS VIII, PTS 1-3
Artículo2004 High-temperature plastic behavior of reaction-bonded CuO and TiO2 co-doped alumina-zirconia MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Artículo2004 Joining advanced ceramics by plastic flow CERAMICS INTERNATIONAL
Ponencia2004 Joining of advanced structural materials by plastic deformation CERAMIC ENGINEERING AND SCIENCE PROCEEDINGS
Ponencia2004 Mechanical performance of advanced ceramic parts joined by plastic flow CERAMIC ENGINEERING AND SCIENCE PROCEEDINGS
Artículo2004 Plastic behaviour of nanostructured yttria tetragonal zirconia polycrystals: The effect of yttrium segregation Materials Science Forum
Artículo2004 Portevin-Le Chatelier effect in Y2O3-ZrO2 single crystals SCRIPTA MATERIALIA
Artículo2004 Solid-particle erosion and strength degradation of Si3N4/BN fibrous monoliths WEAR
Artículo2004 Solid-particle erosion of a geopolymer containing fly ash and blast-furnace slag WEAR
Artículo2003 Comportamiento plástico a alta temperatura de Al2O3 codopado con CuO y TiO2 fabricado por reacción BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2003 High temperature plastic deformation of 24-32 mol% yttria cubic stabilized zirconia (YCSZ) single crystals JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2003 High-temperature mechanical properties of zirconia/nickel composites JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2003 Influence of strain rate on the plastic deformation of high yttria content YCSZ single crystals at 1400-1500 degrees C SCRIPTA MATERIALIA
Artículo2003 Joining alumina/zirconia ceramics MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Artículo2003 Microestructura de Al2O3/TZP codopado con Fe2O3 y TiO2 fabricado por reacción (RBAO) BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO
Artículo2002 Contribution to the study of the transition to a superstructure in high yttria content YCSZ JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2002 Electrical characterization of a joined electroceramic, La0.85Sr0.15MnO3 JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Artículo2002 High temperature stress relaxation in Ti- and Cu-doped reaction bonded Al2O3 JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2002 High-temperature mechanical properties of anode-supported bilayers SOLID STATE IONICS
Artículo2002 Influence of internal stresses in superplastic joining of zirconia toughened alumina ACTA MATERIALIA
Artículo2002 Joining particulate and whisker ceramic composites by plastic flow COMPOSITE STRUCTURES
Artículo2002 Plasticity of nanocrystalline yttria-stabilized tetragonal zirconia polycrystals JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2002 Processing and mechanical properties of materials in the Hf-N system JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2001 Comparación del comportamiento mecánico a altas temperaturas entre nanocerámicos de Y-TZP y materiales submicrométricos Revista de metalurgia
Artículo2001 Current understanding of superplastic deformation of Y-TZP and its application to joining MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Artículo2001 Origin of diffuse electron scattering in yttria-cubic-stabilized zirconia single crystals with 24-32 mol% yttria PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES
Artículo2001 Synthesis of mullite powders by acrylamide polymerization JOURNAL OF MATERIALS SCIENCE LETTERS
Artículo2001 Tensión de límite elástico en monocristales de circonia totalmente estabilizada con alto contenido en óxido de itrio Revista de metalurgia
Artículo2000 Effect of layer interfaces on the high-temperature mechanical properties of alumina/zirconia laminate composites ACTA MATERIALIA
Artículo2000 High temperature mechanical behavior of YSZ nanocrystals CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES
Ponencia2000 Superplasticity and joining of zirconia-based ceramics SUPERPLASTICITY-CURRENT STATUS AND FUTURE POTENTIAL
Artículo1999 Creep of nanocrystalline Y-SZP ceramics NANOSTRUCTURED MATERIALS
Artículo1999 High-temperature compressive creep of liquid phase sintered silicon carbide ACTA MATERIALIA
Artículo1999 Influence of defects on the high temperature mechanical behaviour of yttria fully-stabilized zirconia single crystals RADIATION EFFECTS AND DEFECTS IN SOLIDS
Artículo1999 Joining of yttria-tetragonal stabilized zirconia polycrystals using nanocrystals SCRIPTA MATERIALIA
Artículo1998 Comportamiento mecánico del carburo de silicio policristalino a altas temperaturas Información Tecnológica

Proyectos de Investigación

Fecha de inicio Fecha de fin Denominación Agencia financiadora Importe concedido
01/09/2023 31/08/2027 Diseño de cerámicas avanzadas con nanomateriales 2D para dispositivos electroquímicos de alta temperatura (PID2022-140191NB-I00) Ministerio de Ciencia e Innovación (Nacional) 156.250,00 €
01/09/2023 31/08/2026 Ténicas innovadoras basadas en campos eléctricos para la preparación de baterías de estado sólido (PID2022-141199OA-I00) Ministerio de Ciencia e Innovación (Nacional) 93.750,00 €
01/12/2022 30/11/2024 Desarrollo de Nanogeneradores Piezoeléctricos Flexibles y de alta Eficiencia basados en Nanocompuestos Perovskita/PVDF (TED2021-131458A-I00) Ministerio de Ciencia e Innovación (Nacional) 126.500,00 €
05/10/2021 31/03/2023 Desarrollo de cerámicas avanzadas con nanomateriales 2D para su aplicación en sistemas de propulsión y frenado en la industria aeroespacial (AEROCER-2D) (P20_01024) Consejería de Economía, Conocimiento, Empresas y Universidad (Autonómico) 60.125,00 €
01/01/2019 31/12/2022 Procesado y Caracterización de Composites Cerámicos con Nanomateriales Laminados Bidimensionales (PGC2018-101377-B-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional) 121.000,00 €
01/01/2019 30/09/2022 Refuerzo Intragranular de Cerámicas con Fases de Baja Dimensionalidad (PGC2018-094952-B-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional) 96.800,00 €
01/01/2016 31/12/2020 Cerámicas Nanoestructuradas a Base de Carburo de Boro y Nitruro de Titanio para Aplicaciones Estructurales (MAT2015-71411-R) Ministerio de Economía y Competitividad (Nacional) 157.300,00 €
01/01/2016 30/09/2019 Procesado y Caracterización Microestructural, Mecánica y Eléctrica de Compuestos Cerámica-Grafeno (MAT2015-67889-P) Ministerio de Economía y Competitividad (Nacional) 89.177,00 €
30/01/2014 16/07/2019 Procesado, Caracterización y Propiedades Mecánicas de Cerámicos Nanoestructurados Reforzados con Nanotubos de Carbono. (P12-FQM-1079) Consejería de Economía, Innovación y Ciencia (Autonómico) 157.094,00 €
01/01/2013 31/12/2015 Caracterización Microestructural y Estudio de las Propiedades Mecánicas de Nanocompuestos Cerámico/Cnts Sinterizados Mediante Horno de Microondas y Sps. (MAT2012-34217) Ministerio de Economía y Competitividad (Nacional) 70.200,00 €
01/01/2010 30/06/2013 Compuestos cerámico/cnts: procesado, caracterización y propiedades mecánicas (MAT2009-11078) Ministerio de Ciencia e Innovación (Nacional) 211.750,00 €
01/10/2006 31/03/2010 Obtención y caracterización de cerámicos no-oxidicos nanoestructurados tipo SIC y Si3N4. Estudio del comportamiento superplástico de estos cerámicos (MAT2006-03068) Ministerio de Educación y Ciencia (Nacional) 139.150,00 €
01/10/2006 31/03/2010 Materiales compuestos nanoestructurados cerámica-cerámica y cerámica-metal para aplicaciones ópticas y estructurales (MAT2006-10249-C02-02) Ministerio de Educación y Ciencia (Nacional) 133.100,00 €
01/03/2006 28/02/2009 Superplasticidad de nanocerámicos de SiC y Si3N4 (EXC/2005/FQM-337) Junta de Andalucía (Plan Andaluz de Investigación) (Autonómico) 149.999,96 €
15/11/2003 30/04/2007 Materiales nanoestructurados: monolíticos y compuestos cerámica metal (MAT2003-04199-C02-02) Ministerio de Ciencia y Tecnología (Nacional) 203.100,00 €
28/12/2000 27/12/2003 Propiedades mecánicas y conductividad iónica de nanocerámicos de circonia (MAT2000-0622) Ministerio de Ciencia y Tecnología (Nacional) 79.429,76 €
01/03/1998 31/08/2001 SUPERPLASTIC DEPOSITION OF CERAMIC COATINGS (BRPR-CT97-0548) 175.000,00 €

Contratos

Fecha de inicio Fecha de fin Denominación Agencia financiadora Importe concedido
23/05/2024 22/01/2025 Estudio preliminar de fabricación de escudos térmicos cerámicos (5153/2065) Orbital Paradigm, S.L. (Desconocido)
13/12/2022 20/12/2022 Determinación de la resistencia a flexión de probetas de circona (4924/2028) Itálica Sinterizado Dental S.L. (Desconocido)
13/05/2021 27/05/2021 Análisis de acero marcado por láser - determinación de óxido en la superficie (4119/1092) GONVAUTO, S.A. (Desconocido)

Ayudas

Fecha de inicio Fecha de fin Denominación Agencia financiadora Importe concedido
29/03/2009 28/03/2010 Advances in boundary lubrication and boundary surface films (MAT2008-05169-E) Ministerio de Ciencia e Innovación (Nacional) 6.000,00 €
29/03/2009 03/04/2009 Advances in Boundary Lubrication and Boundary Surface Films (PP2009-01-041) Universidad de Sevilla (Local) 3.000,00 €
31/12/2005 31/12/2006 International Workshop. Mechanical properties in advanced materials: recent insights (MAT2005-23947-E) Ministerio de Educación y Ciencia (Nacional) 3.000,00 €

Patentes

Nº Solicitud Fecha Solicitud Fecha Concesión Nombre
P201630692 27/05/2016 30/08/2018 Resinas reforzadas con nanopartículas de grafeno o con una combinación de nanopartículas de grafeno y nanotubos de carbono