Ver Investigador - - Prisma - Unidad de Bibliometría

Rocio Moriche Tirado

Profesora Titular de Universidad
rmoriche@us.es
Área de conocimiento: Física de la Materia Condensada
Departamento: Física de la Materia Condensada
Grupo: PROPIEDADES MECÁNICAS DE SÓLIDOS - FQM-163 (Universidad de Sevilla)

Investiga en

Tipo Año Título Fuente
Artículo2024 Fine-grained BCZT piezoelectric ceramics by combining high-energy mechanochemical synthesis and hot-press sintering JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2024 Influence of graphene-based nanostructures processing routes and aspect ratio in flexural strength and fracture mechanisms of 3Y-TZP-matrix composites CERAMICS INTERNATIONAL
Artículo2024 Microhardness and wear behavior of nanodiamond-reinforced nanocomposites for dental applications Polymer Composites
Revisión2023 An overview of polymeric composite scaffolds with piezoelectric properties for improved bone regeneration MATERIALS & DESIGN
Artículo2023 Electrical performance of orthotropic and isotropic 3YTZP composites with graphene fillers JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2022 Electrical, thermo-electrical, and electromagnetic behaviour of epoxy composites reinforced with graphene nanoplatelets with different average surface area POLYMERS
Artículo2022 Graphene nanoplatelets electrical networks as highly efficient self-heating materials for glass fiber fabrics JOURNAL OF INDUSTRIAL TEXTILES
Artículo2022 Highly efficient electrical discharge machining of yttria-stabilized zirconia ceramics with graphene nanostructures as fillers JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2021 Influence of the porosity and type of bioglass on the micro-mechanical and bioactive behavior of coated porous titanium substrates JOURNAL OF NON-CRYSTALLINE SOLIDS
Artículo2021 Synthesis and deposition of silver nanoparticles on porous titanium substrates for biomedical applications SURFACE & COATINGS TECHNOLOGY
Artículo2020 Development of a tinbtamozr-based high entropy alloy with low young´s modulus by mechanical alloying route METALS
Artículo2020 Influence of manufacturing parameters and post processing on the electrical conductivity of extrusion-based 3D printed nanocomposite parts POLYMERS
Otros2020 Mirada microscópica de los materiales: metalografía de aceros Portal De Realidad Extendida de la Universidad de Sevilla
Artículo2020 Monitoring crack propagation in skin-stringer elements using carbon nanotube doped adhesive films: Influence of defects and manufacturing process COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2020 Printable self-heating coatings based on the use of carbon nanoreinforcements Polymer Composites
Artículo2020 Sensitive response of GNP/epoxy coatings as strain sensors: Analysis of tensile-compressive and reversible cyclic behavior SMART MATERIALS AND STRUCTURES
Artículo2020 Tunable structure and connectivity of organosilica hybrid films by using different epoxy based precursors in atmospheric plasma deposition APPLIED SURFACE SCIENCE
Artículo2019 An approach using highly sensitive carbon nanotube adhesive films for crack growth detection under flexural load in composite structures COMPOSITE STRUCTURES
Artículo2019 Effect of graphene nanoplatelets thickness on strain sensitivity of nanocomposites: A deeper theoretical to experimental analysis COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2019 Evaluation of sensitivity for detecting different failure modes of epoxy matrix composites doped with graphene nanoparticles COMPOSITE STRUCTURES
Artículo2019 Hydrothermal ageing of graphene/carbon nanotubes/epoxy hybrid nanocomposites POLYMER DEGRADATION AND STABILITY
Artículo2019 Influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites POLYMER TESTING
Artículo2019 Modifications induced in photocuring of Bis- GMA/TEGDMA by the addition of graphene nanoplatelets for 3D printable electrically conductive nanocomposites COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2019 Porous titanium surfaces to control bacteria growth: mechanical properties and sulfonated polyetheretherketone coatings as antibiofouling approaches METALS
Artículo2018 Carbon nanotubes and graphene into thermosetting composites: Synergy and combined effect JOURNAL OF APPLIED POLYMER SCIENCE
Ponencia2018 Crack propagation monitoring with carbon nanotube doped adhesive films on skin-stringer sub-elements 9th European Workshop on Structural Health Monitoring, EWSHM 2018
Artículo2018 High sensitive damage sensors based on the use of functionalized graphene nanoplatelets coated fabrics as reinforcement in multiscale composite materials COMPOSITES PART B-ENGINEERING
Artículo2018 Influence of Thickness and Lateral Size of Graphene Nanoplatelets on Water Uptake in Epoxy/Graphene Nanocomposites APPLIED SCIENCES-BASEL
Artículo2018 Sensitivity, influence of the strain rate and reversibility of GNPs based multiscale composite materials for high sensitive strain sensors COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2017 Graphene nanoplatelets coated glass fibre fabrics as strain sensors COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2017 Highly sensitive strain gauges with carbon nanotubes: From bulk nanocomposites to multifunctional coatings for damage sensing APPLIED SURFACE SCIENCE
Ponencia2017 Thermal and mechanical properties of self-healing epoxy/graphene nanocomposites 8th Conference on Smart Structures and Materials, SMART 2017 and 6th International Conference on Smart Materials and Nanotechnology in Engineering, SMN 2017
Artículo2016 Electrically conductive functionalized-GNP/epoxy based composites: From nanocomposite to multiscale glass fibre composite material COMPOSITES PART B-ENGINEERING
Artículo2016 GNPs reinforced epoxy nanocomposites used as thermal interface materials JOURNAL OF NANO RESEARCH
Artículo2016 Joule effect self-heating of epoxy composites reinforced with graphitic nanofillers JOURNAL OF POLYMER RESEARCH
Artículo2016 Reversible phenomena and failure localization in self-monitoring GNP/epoxy nanocomposites COMPOSITE STRUCTURES
Artículo2016 Strain monitoring mechanisms of sensors based on the addition of graphene nanoplatelets into an epoxy matrix COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2016 Strain sensing based on multiscale composite materials reinforced with graphene nanoplatelets JOVE-JOURNAL OF VISUALIZED EXPERIMENTS
Ponencia2016 Structural health monitoring in multiscale composite materials: Nanoreinforced epoxy matrices and coated fabrics 8th European Workshop on Structural Health Monitoring, EWSHM 2016
Ponencia2016 Surface modification of continuous fibers with carbon nanostructures to get self-sensing capabilities 8th European Workshop on Structural Health Monitoring, EWSHM 2016
Artículo2016 Thermal conductivity and lap shear strength of GNP/epoxy nanocomposites adhesives INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
Artículo2015 Morphological changes on graphene nanoplatelets induced during dispersion into an epoxy resin by different methods COMPOSITES PART B-ENGINEERING
Artículo2014 Advantages and disadvantages of the addition of graphene nanoplatelets to epoxy resins EUROPEAN POLYMER JOURNAL
Artículo2014 Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis JOURNAL OF POWER SOURCES
Ponencia2014 Epoxy adhesives modified with graphene for thermal interface materials JOURNAL OF ADHESION
Ponencia2014 Graphene nanocomposites as strain-damage sensor 16th European Conference on Composite Materials, ECCM 2014
Artículo2014 Graphene nanoplatelets thickness and lateral size influence on the morphology and behavior of epoxy composites EUROPEAN POLYMER JOURNAL
Ponencia2014 Thermal conductivity of GNP/epoxy nanocomposites and their application as thermal interface materials 16th European Conference on Composite Materials, ECCM 2014
Artículo2013 In situ processing of epoxy composites reinforced with graphene nanoplatelets COMPOSITES SCIENCE AND TECHNOLOGY
Artículo2013 Self-stratifying and orientation of exfoliated few-layer graphene nanoplatelets in epoxy composites COMPOSITES SCIENCE AND TECHNOLOGY
Desarrollo de sensores estructurales de resinas epoxi basados en nanopartículas de grafeno (2016)
Dirigida por: María Sánchez Martínez, Silvia González Prolongo

Este investigador no ha dirigido/tutorizado tesis

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/12/2022 30/11/2024 Responsable Desarrollo de Nanogeneradores Piezoeléctricos Flexibles y de alta Eficiencia basados en Nanocompuestos Perovskita/PVDF (TED2021-131458A-I00) Ministerio de Ciencia e Innovación (Nacional)
05/10/2021 31/03/2023 Investigador/a Desarrollo de cerámicas avanzadas con nanomateriales 2D para su aplicación en sistemas de propulsión y frenado en la industria aeroespacial (AEROCER-2D) (P20_01024) Consejería de Economía, Conocimiento, Empresas y Universidad (Autonómico)
01/01/2019 31/12/2022 Investigador/a Procesado y Caracterización de Composites Cerámicos con Nanomateriales Laminados Bidimensionales (PGC2018-101377-B-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional)
01/09/2023 31/08/2027 Investigador/a Diseño de cerámicas avanzadas con nanomateriales 2D para dispositivos electroquímicos de alta temperatura (PID2022-140191NB-I00) Ministerio de Ciencia e Innovación (Nacional)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
13/05/2021 27/05/2021 Investigador/a Análisis de acero marcado por láser - determinación de óxido en la superficie (4119/1092) GONVAUTO, S.A. (Desconocido)
13/12/2022 20/12/2022 Responsable Determinación de la resistencia a flexión de probetas de circona (4924/2028) Itálica Sinterizado Dental S.L. (Desconocido)
23/05/2024 22/01/2025 Investigador/a Estudio preliminar de fabricación de escudos térmicos cerámicos (5153/2065) Orbital Paradigm, S.L. (Desconocido)

Patentes

Nº Solicitud Fecha Solicitud Fecha Concesión Nombre
P201630692 27/05/2016 30/08/2018 Resinas reforzadas con nanopartículas de grafeno o con una combinación de nanopartículas de grafeno y nanotubos de carbono