Ver Investigador - - Prisma - Unidad de Bibliometría

Bibi Malmal Moshtaghion Entezari

Profesora Titular de Universidad
mali_moshtagh@us.es
Área de conocimiento: Física de la Materia Condensada
Departamento: Física de la Materia Condensada
Grupo: PROPIEDADES MECÁNICAS, PROCESADO Y MODELIZACIÓN DE CERÁMICAS AVANZADAS - FQM-393 (Universidad de Sevilla)
Prog. doctorado: CIENCIA Y TECNOLOGÍA DE NUEVOS MATERIALES (INTERUNIVERSITARIO)

Investiga en

Tipo Año Título Fuente
Artículo2024 Affordable spark plasma sintering of superhard Al-doped ZrB2 nanoceramics from ZrH2, B, and Al mechanically activated by shaker milling CERAMICS INTERNATIONAL
Artículo2024 Fabricating exotic boron carbide ceramics by shaker milling and reactive spark plasma sintering of B and C: Application to the elusive B6C CERAMICS INTERNATIONAL
Artículo2024 Flash sintering can induce an anisotropic microstructure in ceramics. A phase field modeling insight SCRIPTA MATERIALIA
Artículo2024 On the role of the electric field in the last-stage sintering of ceramics: A phase-field modelling approach ACTA MATERIALIA
Artículo2023 A simple procedure for accurately assessing the stoichiometry and structural disorder of TiN ceramics by X-ray diffractometry CERAMICS INTERNATIONAL
Artículo2023 Modelling the states of minimum and maximum disorder in B4C ceramics: which one is expected in spark plasma sintered boron carbide? CERAMICS INTERNATIONAL
Artículo2023 Processing of ZrB2 tribo-ceramics by reactive spark plasma sintering of ZrH2+2B subjected to high-energy pre-ball-milling JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2023 Quantifying structural disorder in spinels by X-ray diffractometry through constrained–restrained Rietveld refinements CERAMICS INTERNATIONAL
Artículo2023 Scratch, fretting, and sliding wear of a ZrB2–hardened Zr3Al2 intermetallic–ceramic composite Journal of Materials Research and Technology
Artículo2022 Directionally solidified cobalt-doped MgO-MgAl2O4 eutectic composites for selective emitters APPLIED SCIENCES-BASEL
Artículo2022 Powder-metallurgy fabrication of ZrB2-hardened Zr3Al2intermetallic composites by high-energy ball-milling and reactive spark-plasma sintering Journal of Materials Research and Technology
Artículo2021 Can Y2O3-MgO eutectics be new promising structural and optical ceramics? ACTA MATERIALIA
Artículo2021 CaO–MgO–SiO2–P2O5- based multiphase bio-ceramics fabricated by directional solidification: Microstructure features and in vitro bioactivity studies CERAMICS INTERNATIONAL
Artículo2021 Cation-driven electrical conductivity in Ta-doped orthorhombic zirconia ceramics CERAMICS INTERNATIONAL
Artículo2021 HfB2 ceramic polycrystals: a low-temperature metal-like ceramic at high temperatures? SCRIPTA MATERIALIA
Artículo2021 Titanium carbonitride fabricated by spark plasma sintering: is it a ceramic model of carbon-induced Friedel-Fleisher strengthening effect? JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2020 Disclination dipoles are the Holy Grail for high temperature superplasticity in ceramics SCRIPTA MATERIALIA
Artículo2020 Medium infrared transparency of MgO-MgAl2O4 directionally solidified eutectics JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2020 Mg2SiO4-MgAl2O4 directionally solidified eutectics: Hardness dependence modelled through an array of screw dislocations JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2019 Does grain size have an influence on intrinsic mechanical properties and conduction mechanism of near fully-dense boron carbide ceramics? JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2019 Elusive super-hard B6C accessible through the laser-floating zone method Scientific reports
Artículo2019 Non-Hall-Petch hardness dependence in ultrafine fibrous MgAl2O4-MgO eutectic ceramics fabricated by the laser-heated floating zone (LFZ) method JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2019 Sintering kinetics, defect chemistry and room-temperature mechanical properties of titanium nitride prepared by spark plasma sintering JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2018 Exotic grain growth law in twinned boron carbide under electric fields JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2018 Grain-boundary diffusion coefficient in alpha-Al2O3 from spark plasma sintering tests: Evidence of collective motion of charge disconnections CERAMICS INTERNATIONAL
Artículo2018 Graphene or carbon nanofiber-reinforced zirconia composites: Are they really worthwhile for structural applications? JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2018 High-temperature compressive creep of novel fine-grained orthorhombic ZrO2 ceramics stabilized with 12 mol% Ta doping JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2018 Is an alumina-whisker-reinforced alumina composite the most efficient choice for an oxidation-resistant high-temperature ceramic? JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2018 Spark plasma sintering of titanium nitride in nitrogen: Does it affect the sinterability and the mechanical properties? JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2017 Carbon nanofibers replacing graphene oxide in ceramic composites as a reinforcing-phase: Is it feasible? JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2017 Ceramics of Ta-doping stabilized orthorhombic ZrO2 densified by spark plasma sintering and the effect of post-annealing in air SCRIPTA MATERIALIA
Artículo2017 High-temperature creep of carbon nanofiber-reinforced and graphene oxide-reinforced alumina composites sintered by spark plasma sintering CERAMICS INTERNATIONAL
Artículo2017 Spark plasma sintering of fine-grained alumina ceramics reinforced with alumina whiskers CERAMICS INTERNATIONAL
Artículo2016 A new approach to the grain-size dependent transition of stress exponents in yttria tetragonal zirconia polycrystals. The theoretical limit for superplasticity in ceramics CERAMICS INTERNATIONAL
Artículo2016 Abrasive wear rate of boron carbide ceramics: Influence of microstructural and mechanical aspects on their tribological response JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2016 Enhancing the spark-plasma sinterability of B4C nanopowders via room-temperature methylation induced purification JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2016 Grain size dependence of hardness and fracture toughness in pure near fully-dense boron carbide ceramics JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2016 High-temperature plastic deformation of spark plasma sintered boron carbide-based composites: The case study of B4C-SiC with/without graphite (g) JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Ponencia2016 High-temperature plasticity in super hard boron carbide ceramics Materials Science Forum
Artículo2016 Mechanical instability of stressed grain boundaries during plastic deformation of zirconium carbide JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Ponencia2016 The role of a threshold stress on the superplasticity of ceramics revisited Materials Science Forum
Artículo2015 Densification of B4C nanopowder with nanograin retention by spark-plasma sintering JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2015 High-temperature creep deformation of coarse-grained boron carbide ceramics JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2015 High-temperature deformation of fully-dense fine-grained boron carbide ceramics: Experimental facts and modeling MATERIALS & DESIGN
Artículo2014 A phase-field model of 2D grain size distribution in ceramics JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2014 Additive-free superhard B4C with ultrafine-grained dense microstructures JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2014 Grain-boundary cation diffusion in ceria tetragonal zirconia determined by constant-strain-rate deformation tests JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2013 Effect of spark plasma sintering parameters on microstructure and room-temperature hardness and toughness of fine-grained boron carbide (B4C) JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Ponencia2013 Recent insights on the superplastic behaviour of ceramics Materials Science Forum
Artículo2013 The Effect of Crystallinity of Carbon Source on Mechanically Activated Carbothermic Synthesis of Nano-Sized SiC Powders JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
Artículo2013 Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2012 Rapid carbothermic synthesis of silicon carbide nano powders by using microwave heating JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2011 A study on the effects of silica particle size and milling time on synthesis of silicon carbide nanoparticles by carbothermic reduction INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2010 Developing Two New Tundish Plasters and Comparing with the Magnesia Plaster Used in Continuous Casting of Steel JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
Artículo2008 Analyze complex phases of slag-tundish plaster reactions by modified XRD ratio of slopes method for some kinetic considerations JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Artículo2007 Hot corrosion mechanism of tundish plaster with steel slags in continuous casting JOURNAL OF MATERIALS SCIENCE

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/10/2020 13/01/2024 Responsable A la Búsqueda de Nuevos Cerámicos de Ultraduros a Base de Boro para Aplicaciones Estructurales en la Nueva Generación de Aviones y uso Seguro y Eficiente de la Energía (PID2019-103847RJ-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional)
01/01/2019 30/09/2022 Investigador/a Refuerzo Intragranular de Cerámicas con Fases de Baja Dimensionalidad (PGC2018-094952-B-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional)
01/11/2021 31/03/2023 Responsable Fabricación y caracterización microestructural y mecánica de cerámicas de carburo de boro con estequiometría controlada (BORONCARB) (P18-RTJ-1972) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
01/11/2021 31/03/2023 Investigador/a Fabricación y caracterización microestructural y mecánica de cerámicas de carburo de boro con estequiometría controlada (BORONCARB) (P18-RTJ-1972) Junta de Andalucía (Consejería de Economía y Conocimiento) (Autonómico)
01/01/2016 31/12/2020 Investigador/a Cerámicas Nanoestructuradas a Base de Carburo de Boro y Nitruro de Titanio para Aplicaciones Estructurales (MAT2015-71411-R) Ministerio de Economía y Competitividad (Nacional)
01/01/2010 01/07/2013 Contratado Acoplamiento dinámica de fronteras de grano - segregación de impurezas en policristales nanoestructurados: aplicación a la circonia tetragonal dopada con itrio policristalina (YTZP). (MAT2009-14351-C02-01) Ministerio de Ciencia e Innovación (Nacional)
01/01/2013 31/12/2015 Contratado Simulación Multiescala de YSZ Nanoestructurada: desde la DFT y la Difusión Hasta la Caracterización Microestructural y la Plasticidad (MAT2012-38205-C02-01) Ministerio de Economía y Competitividad (Nacional)
01/01/2016 31/12/2020 Contratado Cerámicas Nanoestructuradas a Base de Carburo de Boro y Nitruro de Titanio para Aplicaciones Estructurales (MAT2015-71411-R) Ministerio de Economía y Competitividad (Nacional)
01/10/2020 13/01/2024 Contratado A la Búsqueda de Nuevos Cerámicos de Ultraduros a Base de Boro para Aplicaciones Estructurales en la Nueva Generación de Aviones y uso Seguro y Eficiente de la Energía (PID2019-103847RJ-I00) Ministerio de Ciencia, Innovación y Universidades (Nacional)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/07/2013 31/03/2015 Contratado Fabrication and mechanical propieties of new alumina-based materrials reinforced with alumina fibers (1967/0679) Nippon Steel & Sumitomo Metal (Desconocido)
El investigador no tiene ningún resultado de investigación asociado