Ver Investigador - - Prisma - Unidad de Bibliometría

Ernesto Chicardi Augusto

Profesor Titular de Universidad
echicardi@us.es
Área de conocimiento: Ciencia de los Materiales e Ingeniería Metalúrgica
Departamento: Ingeniería y Ciencia de los Materiales y del Transporte
Grupo: TECNOLOGÍA DE POLVOS Y CORROSIÓN (TEP-973)
Tipo Año Título Fuente
Artículo2023 BiOX (X = I or Cl?) modified Na-K2Ti6O13 nanostructured materials for efficient degradation of Tetracycline, Acid Black 1 dye and microbial disinfection in wastewater under Blue LED SEPARATION AND PURIFICATION TECHNOLOGY
Artículo2023 Detoxification of harmful pollutants using highly efficient visible light active Ru/TiO2/PVDF photocatalytic membranes MATERIALS RESEARCH BULLETIN
Artículo2023 Development of highly efficient cost-effective CdS/Ag nanocomposite for removal of azo dyes under UV and solar light CERAMICS INTERNATIONAL
Capítulo2023 Experiencia sobre una metodología de aprendizaje basada en problemas en el ámbito de la ingeniería Mejorando la enseñanza a través de la innovación educativa
Artículo2023 Fabrication of Ag/WO3/g-C3N4 composites for the photocatalytic degradation of harmful dyes OPTICAL MATERIALS
Artículo2023 Fabrication of Bi2O3/Bismuth Titanates Modified with Metal–Organic Framework-In2S3/CdIn2S4 Materials for Electrocatalytic H2 Production and Its Photoactivity LANGMUIR
Artículo2023 Green hydrogen production using doped Fe2O3 foams INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
Artículo2023 Synthesis and characterization of visible active Fe grafted ZnO nanocomposites for NBB degradation in water INORGANIC CHEMISTRY COMMUNICATIONS
Artículo2023 Type-a gelatin-based hydrogel infiltration and degradation in titanium foams as a potential method for localised drug delivery. POLYMERS
Artículo2022 Alumina doped Fe2O3 foams by freeze-casting for redox cycling applications JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Artículo2021 Biocompatibility and cellular behavior of tinbta alloy with adapted rigidity for the replacement of bone tissue METALS
Artículo2021 Effect of milling parameters on the development of a nanostructured FCC–TiNb15Mn alloy via high-energy ball milling METALS
Artículo2021 Effect of processing parameters on the properties of freeze-cast Ni wick with gradient porosity MATERIALS & DESIGN
Artículo2021 Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing MATERIALS CHARACTERIZATION
Artículo2021 Nickel wick by continuous freeze-casting: influences of the particle size on the capillarity and mechanical properties MATERIALS
Artículo2021 Pore morphology evolution and atom distribution of doped Fe2O3 foams developed by freeze-casting after redox cycling Journal of Materials Research and Technology
Artículo2021 Study of the influence of sintering atmosphere and mechanical activation on the synthesis of bulk Ti2AlN MAX phase obtained by spark plasma sintering MATERIALS
Artículo2021 Synthesis and characterization of a nearly single bulk ti2aln max phase obtained from ti/aln powder mixture through spark plasma sintering MATERIALS
Artículo2020 Characterization and monitoring of titanium bone implants with impedance spectroscopy SENSORS
Revisión2020 Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders Journal of Manufacturing Processes
Artículo2020 Development of a tinbtamozr-based high entropy alloy with low young´s modulus by mechanical alloying route METALS
Artículo2020 Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2020 Estudio de biocompatibilidad y osteointegración de nuevos materiales protésicos REVISTA DE OSTEOPOROSIS Y METABOLISMO MINERAL
Artículo2020 Influence of the test configuration and temperature on the mechanical behaviour of WC-Co METALS
Artículo2020 Mirada microscópica de los materiales: metalografía de aceros Portal De Realidad Extendida de la Universidad de Sevilla
Artículo2020 Study of the effect of the floating die compaction on mechanical properties of titanium foams METALS
Artículo2020 Synthesis of all equiatomic five-transition metals High Entropy Carbides of the IVB (Ti, Zr, Hf) and VB (V, Nb, Ta) groups by a low temperature route CERAMICS INTERNATIONAL
Artículo2020 Use of impedance spectroscopy for the characterization of in-vitro osteoblast cell response in porous titanium bone implants METALS
Artículo2019 Effects of Boron Addition on the Microstructure and Mechanical Properties of (Ti,Ta)(C,N)-Co Based Cermets METALS
Artículo2019 Low temperature synthesis of an equiatomic (TiZrHfVNb)C5 high entropy carbide by a mechanically-induced carbon diffusion route CERAMICS INTERNATIONAL
Artículo2019 Manufacturing optimisation of an original nanostructured (beta plus gamma)-TiNbTa material Journal of Materials Research and Technology
Artículo2019 Synthesis of a cubic Ti(BCN) advanced ceramic by a solid-gas mechanochemical reaction CERAMICS INTERNATIONAL
Artículo2019 The influence of mechanical activation process on the microstructure and mechanical properties of bulk Ti2AlN MAX phase obtained by reactive hot pressing CERAMICS INTERNATIONAL
Artículo2018 Development of a novel fcc structure for an amorphous-nanocrystalline Ti-33Nb-4Mn (at.%) ternary alloy MATERIALS CHARACTERIZATION
Artículo2018 Development of a novel TiNbTa material potentially suitable for bone replacement implants MATERIALS & DESIGN
Artículo2018 Effects of additives on the synthesis of TiCxN1-x by a solid-gas mechanically induced self-sustaining reaction CERAMICS INTERNATIONAL
Artículo2018 Influence of temperature on the biaxial strength of cemented carbides with different microstructures INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2018 Influence of the Mn content on the TiNbxMn alloys with a novel fcc structure JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2018 Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications SURFACE & COATINGS TECHNOLOGY
Artículo2017 A new family of cermets: Chemically complex but microstructurally simple INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2017 Effect of the impact energy on the chemical homogeneity of a (Ti,Ta,Nb)(C,N) solid solution obtained via a mechanically induced self-sustaining reaction JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2017 Influence of milling parameters on the solid-gas synthesis of TiCxN1-x by mechanically induced self-sustaining reaction POWDER TECHNOLOGY
Artículo2017 Wear damage of TiTaCN-Co cermets at room and elevated temperatures Procedia Structural Integrity
Artículo2016 Design, processing and characterization of materials with controlled radial porosity for biomedical and nuclear applications Key engineering materials
Artículo2016 Design, processing and characterization of titanium with radial graded porosity for bone implants MATERIALS & DESIGN
Artículo2016 High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets CORROSION SCIENCE
Artículo2016 Hot-pressing of (Ti,Mt)(C,N)-Co-Mo2C (Mt = Ta,Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction CHEMICAL ENGINEERING JOURNAL
Artículo2016 Kinetics of high-temperature oxidation of (Ti,Ta)(C,N)-based cermets CORROSION SCIENCE
Artículo2016 TiTaCN-Co cermets prepared by mechanochemical technique: microstructure and mechanical properties Procedia Engineering
Artículo2015 Aumento de la tenacidad de fractura en cermets basados en carbonitruro de titanio mediante la adición de grafito Anales de Mecánica de la Fractura
Artículo2015 Diseño y fabricación de laminados tipo ti(c,n)-co/wc-co con un potencial equilibrio de propiedades en servicio Anales de Mecánica de la Fractura
Artículo2015 Nanoindentation of (Ti,Ta)(C,N)-Co cermets prepared by methods of mechanochemistry INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2015 Resistencia mecánica de carburos cementados: Influencia de la temperatura y la microestructura Anales de Mecánica de la Fractura
Artículo2015 Toughening of complete solid solution cermets by graphite addition CHEMICAL ENGINEERING JOURNAL
Artículo2014 Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending MATERIALS & DESIGN
Artículo2014 Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions MATERIALS & DESIGN
Artículo2014 Enhanced oxidation resistance of Ti(C,N)-based cermets containing Ta CORROSION SCIENCE
Artículo2014 Instrumented indentation of composite materials prepared by methods of mechanochemistry Key engineering materials
Artículo2014 Processing and characterisation of cermet/hardmetal laminates with strong interfaces MATERIALS & DESIGN
Artículo2013 Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta) (C,N)-based cermets INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2013 Liquid-phase sintering of Ti(C,N)-based cermets. The effects of binder nature and content on the solubility and wettability of hard ceramic phases JOURNAL OF ALLOYS AND COMPOUNDS
Artículo2013 Spark plasma sintering of TixTa1-xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties CHEMICAL ENGINEERING JOURNAL
Artículo2012 Absence of the core-rim microstructure in TixTa1-xCyN1-y-based cermets developed from a pre-sintered carbonitride master alloy INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2012 Development of multicomponent-multiphase materials based on (Ti,Ta,Nb)CxN1-x carbonitride solid solutions CHEMICAL ENGINEERING JOURNAL
Artículo2012 In Situ Synthesis of Ceramic Composite Materials in the Ti-B-C-N System by a Mechanically Induced Self-Sustaining Reaction JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Ponencia2012 Integration of cermet component materials into a solid solution master alloys by mechanically self-sustaining reaction Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012
Artículo2012 Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
Artículo2012 Spark plasma sintering of TiyNb1-yCxN1-x monolithic ceramics obtained by mechanically induced self-sustaining reaction MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Artículo2011 Formation of the complete range of Ti5Si3-xGex solid solutions via mechanically induced self-sustained reactions INTERMETALLICS

Este investigador no ha dirigido/tutorizado tesis

Proyectos de Investigación

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
01/12/2022 30/11/2024 Responsable Desarrollo de materiales porosos a base de Fe mediante impresión 3D para la generación y almacenamiento de hidrógeno verde (TED2021-129920B-C44) Ministerio de Ciencia e Innovación (Nacional)
01/09/2022 31/08/2026 Responsable Fabricación de materiales porosos de base hierro con características refractarias para sistemas de purificación, uso y almacenaje de hidrógeno (PID2021-123010OB-I00) Ministerio de Ciencia e Innovación (Nacional)
01/01/2016 31/12/2019 Investigador/a Desarrollo, Fabricación y Caracterización de Compuestos de Ti-Mg-Ag Porosos Biodegradables y Antibacterianos con un mejor Equilibrio Biomecánico y Biofuncional (MAT2015-71284-P) Ministerio de Economía y Competitividad (Nacional)

Contratos

Fecha de inicio Fecha de fin Rol Denominación Agencia financiadora
20/05/2022 15/12/2022 Responsable Caracterización TEM fase MAX (Ti, Nb) 2SnC en polvo (AE-2189/08/2022) Fondo Nacional de Desarrollo científico y Tecnológico y de Innovación Tecnológica (Desconocido)
El investigador no tiene ningún resultado de investigación asociado