Artículo | 2025 |
Exploring FeVO4/ZnCo2O4 n-p heterojunctions for superior photoelectrochemical performance
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2024 |
2D Titanate Nanosheet-Supported NiMoO x Core@shell Nanospikes for Overall Electrocatalytic Water-Splitting Reactions
|
ENERGY & FUELS |
Artículo | 2024 |
Activated carbon derived from palm date seeds as an adsorbent for methylene blue: kinetic and thermodynamic studies
|
REACTION KINETICS MECHANISMS AND CATALYSIS |
Artículo | 2024 |
Chitosan-Type-A-Gelatin Hydrogels Used as Potential Platforms in Tissue Engineering for Drug Delivery
|
Gels (Basel, Switzerland) |
Artículo | 2024 |
Degradation of thermoplastic polymers for fused filament fabrication under (S)TEM electron beam irradiation
|
POLYMER DEGRADATION AND STABILITY |
Artículo | 2024 |
Degradation of thermoplastic polymers for fused filament fabrication under (S)TEM electron beam irradiation
|
POLYMER DEGRADATION AND STABILITY |
Artículo | 2024 |
Design for additive manufacturing in the medical sector. Tools and study cases
|
DYNA |
Artículo | 2024 |
Development and characterization of Fe2O3 nanoparticles doped with Al2O3 / TiO2 for green hydrogen production
|
CERAMICS INTERNATIONAL |
Artículo | 2024 |
Diseño para la fabricación aditiva en el sector médico.: Herramientas y casos de estudio
|
DYNA |
Artículo | 2024 |
Efficient single-step mechanosynthesis route of nanostructured Hf0.2Nb0.2Ta0.2V0.2Zr0.2C0.5N0.5 High Entropy Carbonitride Powder
|
CERAMICS INTERNATIONAL |
Capítulo | 2024 |
Experiencia docente multidisciplinar aplicando una metodologia basada en podcast
|
Enseñanza e innovación educativa en el ámbito universitario |
Artículo | 2024 |
Green hydrogen production using doped Fe2O3 foams
|
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
Artículo | 2024 |
Hard X-ray Photoelectron Spectroscopy Probing Fe Segregation during the Oxygen Evolution Reaction.
|
ACS APPLIED MATERIALS & INTERFACES |
Capítulo | 2024 |
Study on the Efficiency of Hydrochloric Acid Recovery from Industrial Effluents by Distillation
|
Springer Proceedings in Materials |
Capítulo | 2024 |
Surface Modification of Titanium Dental Implant by Hydrofluoric Acid and an Organic Inhibitor Etching
|
Springer Proceedings in Materials |
Artículo | 2024 |
Surface modification of titanium foams for modulated and targeted release of drug-loaded biocompatible hydrogel. Proof of concept
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
Artículo | 2024 |
Unveiling the Impact of Gelation Temperature on the Rheological and Microstructural Properties of Type A Gelatin Hydrogels
|
POLYMERS |
Artículo | 2023 |
BiOX (X = I or Cl?) modified Na-K2Ti6O13 nanostructured materials for efficient degradation of Tetracycline, Acid Black 1 dye and microbial disinfection in wastewater under Blue LED
|
SEPARATION AND PURIFICATION TECHNOLOGY |
Artículo | 2023 |
Detoxification of harmful pollutants using highly efficient visible light active Ru/TiO2/PVDF photocatalytic membranes
|
MATERIALS RESEARCH BULLETIN |
Artículo | 2023 |
Development of highly efficient cost-effective CdS/Ag nanocomposite for removal of azo dyes under UV and solar light
|
CERAMICS INTERNATIONAL |
Artículo | 2023 |
Effect of pH Hydrolysis on the Recovery of Antimony from Spent Electrolytes from Copper Production
|
MATERIALS |
Capítulo | 2023 |
Experiencia sobre una metodología de aprendizaje basada en problemas en el ámbito de la ingeniería
|
Mejorando la enseñanza a través de la innovación educativa |
Artículo | 2023 |
Extraction of antimony from a hydrochloric acid side stream of copper electro-refining by hydrolysis
|
HYDROMETALLURGY |
Artículo | 2023 |
Fabrication of Ag/WO3/g-C3N4 composites for the photocatalytic degradation of harmful dyes
|
OPTICAL MATERIALS |
Artículo | 2023 |
Fabrication of Bi2O3/Bismuth Titanates Modified with Metal–Organic Framework-In2S3/CdIn2S4 Materials for Electrocatalytic H2 Production and Its Photoactivity
|
LANGMUIR |
Artículo | 2023 |
Low dose electron tomography of novel nanocomposites for additive manufacturing
|
POLYMER TESTING |
Artículo | 2023 |
Polymer nanocomposites for plasmonics: in situ synthesis of gold nanoparticles after additive manufacturing
|
POLYMER TESTING |
Ponencia | 2023 |
Recovery of Antimony by Hydrolysis in Side Streams from Copper Production
|
Proceedings - European Metallurgical Conference, EMC 2023 |
Artículo | 2023 |
Responsive optical materials based on ligand-free perovskite quantum dots embedded in mesoporous scaffolds
|
ACS APPLIED MATERIALS & INTERFACES |
Artículo | 2023 |
Synthesis and characterization of visible active Fe grafted ZnO nanocomposites for NBB degradation in water
|
INORGANIC CHEMISTRY COMMUNICATIONS |
Artículo | 2023 |
Type-a gelatin-based hydrogel infiltration and degradation in titanium foams as a potential method for localised drug delivery.
|
POLYMERS |
Artículo | 2022 |
Alumina doped Fe2O3 foams by freeze-casting for redox cycling applications
|
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
Artículo | 2022 |
Induced damage during STEM-EELS analyses on acrylic-based materials for Stereolithography
|
POLYMER DEGRADATION AND STABILITY |
Artículo | 2022 |
Influences of the solid load on the microstructure and compressive behavior of Fe2O3 scaffolds manufactured by freeze-casting using stearic acid as dispersant agent
|
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
Artículo | 2022 |
Stereolithography of Semiconductor Silver and Acrylic-Based Nanocomposites
|
POLYMERS |
Artículo | 2021 |
Biocompatibility and cellular behavior of tinbta alloy with adapted rigidity for the replacement of bone tissue
|
METALS |
Artículo | 2021 |
Effect of milling parameters on the development of a nanostructured FCC–TiNb15Mn alloy via high-energy ball milling
|
METALS |
Artículo | 2021 |
Effect of processing parameters on the properties of freeze-cast Ni wick with gradient porosity
|
MATERIALS & DESIGN |
Artículo | 2021 |
Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing
|
MATERIALS CHARACTERIZATION |
Artículo | 2021 |
Nickel wick by continuous freeze-casting: influences of the particle size on the capillarity and mechanical properties
|
MATERIALS |
Artículo | 2021 |
Pore morphology evolution and atom distribution of doped Fe2O3 foams developed by freeze-casting after redox cycling
|
Journal of Materials Research and Technology |
Artículo | 2021 |
Study of the influence of sintering atmosphere and mechanical activation on the synthesis of bulk Ti2AlN MAX phase obtained by spark plasma sintering
|
MATERIALS |
Artículo | 2021 |
Synthesis and characterization of a nearly single bulk ti2aln max phase obtained from ti/aln powder mixture through spark plasma sintering
|
MATERIALS |
Artículo | 2021 |
Thermal modeling of the port on a refining furnace to prevent copper infiltration and slag accretion
|
MATERIALS |
Artículo | 2020 |
Characterization and monitoring of titanium bone implants with impedance spectroscopy
|
SENSORS |
Revisión | 2020 |
Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders
|
Journal of Manufacturing Processes |
Artículo | 2020 |
Development of a tinbtamozr-based high entropy alloy with low young´s modulus by mechanical alloying route
|
METALS |
Artículo | 2020 |
Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2020 |
Doped iron oxide scaffolds with gradient porosity fabricated by freeze casting: pore morphology prediction and processing parameters
|
MATERIALS SCIENCE AND TECHNOLOGY |
Artículo | 2020 |
Estudio de biocompatibilidad y osteointegración de nuevos materiales protésicos
|
REVISTA DE OSTEOPOROSIS Y METABOLISMO MINERAL |
Artículo | 2020 |
Heterometallic Titanium-Organic Frameworks by Metal-Induced Dynamic Topological Transformations
|
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY |
Artículo | 2020 |
Influence of the test configuration and temperature on the mechanical behaviour of WC-Co
|
METALS |
Otros | 2020 |
Mirada microscópica de los materiales: metalografía de aceros
|
Portal De Realidad Extendida de la Universidad de Sevilla |
Artículo | 2020 |
Purcell enhancement and wavelength shift of emitted light by CsPbI3Perovskite nanocrystals coupled to hyperbolic metamaterials
|
ACS PHOTONICS |
Artículo | 2020 |
Simulation of transmission electron microscopy images using a generalized single-slice approach: The case of self-assembled quantum dots
|
MATERIALS CHARACTERIZATION |
Artículo | 2020 |
Structure-processing relationships of freeze-cast iron foams fabricated with various solidification rates and post-casting heat treatment
|
JOURNAL OF MATERIALS RESEARCH |
Artículo | 2020 |
Study of the effect of the floating die compaction on mechanical properties of titanium foams
|
METALS |
Artículo | 2020 |
Synthesis of all equiatomic five-transition metals High Entropy Carbides of the IVB (Ti, Zr, Hf) and VB (V, Nb, Ta) groups by a low temperature route
|
CERAMICS INTERNATIONAL |
Artículo | 2020 |
Use of impedance spectroscopy for the characterization of in-vitro osteoblast cell response in porous titanium bone implants
|
METALS |
Artículo | 2019 |
Camphene/polystyrene solutions: a rheological approach for material processing industry
|
JOURNAL OF APPLIED POLYMER SCIENCE |
Artículo | 2019 |
Development of Surface-Coated Polylactic Acid/Polyhydroxyalkanoate (PLA/PHA) Nanocomposites
|
POLYMERS |
Artículo | 2019 |
Effect of the thermal annealing and the nominal composition in the elemental distribution of InxAl1-xAsySb1-y for triple junction solar cells
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2019 |
Effects of Boron Addition on the Microstructure and Mechanical Properties of (Ti,Ta)(C,N)-Co Based Cermets
|
METALS |
Artículo | 2019 |
Influence of the compaction pressure and sintering temperature on the mechanical properties of porous titanium for biomedical applications
|
METALS |
Artículo | 2019 |
Influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites
|
POLYMER TESTING |
Artículo | 2019 |
Insights into Preformed Human Serum Albumin Corona on Iron Oxide Nanoparticles: Structure, Effect of Particle Size, Impact on MRI Efficiency, and Metabolization
|
ACS Applied Bio Materials |
Artículo | 2019 |
Low temperature synthesis of an equiatomic (TiZrHfVNb)C5 high entropy carbide by a mechanically-induced carbon diffusion route
|
CERAMICS INTERNATIONAL |
Artículo | 2019 |
Manufacturing optimisation of an original nanostructured (beta plus gamma)-TiNbTa material
|
Journal of Materials Research and Technology |
Artículo | 2019 |
Post-failure life evaluation: a corrosion-fatigue case history
|
ENGINEERING FAILURE ANALYSIS |
Artículo | 2019 |
Synthesis of a cubic Ti(BCN) advanced ceramic by a solid-gas mechanochemical reaction
|
CERAMICS INTERNATIONAL |
Artículo | 2019 |
The influence of mechanical activation process on the microstructure and mechanical properties of bulk Ti2AlN MAX phase obtained by reactive hot pressing
|
CERAMICS INTERNATIONAL |
Artículo | 2018 |
Development of a novel fcc structure for an amorphous-nanocrystalline Ti-33Nb-4Mn (at.%) ternary alloy
|
MATERIALS CHARACTERIZATION |
Artículo | 2018 |
Development of a novel TiNbTa material potentially suitable for bone replacement implants
|
MATERIALS & DESIGN |
Artículo | 2018 |
Effects of additives on the synthesis of TiCxN1-x by a solid-gas mechanically induced self-sustaining reaction
|
CERAMICS INTERNATIONAL |
Artículo | 2018 |
Gaussian kernel density functions for compositional quantification in atom probe tomography
|
MATERIALS CHARACTERIZATION |
Artículo | 2018 |
Influence of temperature on the biaxial strength of cemented carbides with different microstructures
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2018 |
Influence of the additivation of graphene-like materials on the properties of polyamide for Powder Bed Fusion
|
Progress in Additive Manufacturing |
Artículo | 2018 |
Influence of the growth temperature on the composition distribution at sub-nm scale of InAlAsSb for solar cells
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2018 |
Influence of the Mn content on the TiNbxMn alloys with a novel fcc structure
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2018 |
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
Artículo | 2017 |
A new family of cermets: Chemically complex but microstructurally simple
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2017 |
Compositional and microstructural study of joining methods in archaeological gold objects
|
X-RAY SPECTROMETRY |
Artículo | 2017 |
Effect of the impact energy on the chemical homogeneity of a (Ti,Ta,Nb)(C,N) solid solution obtained via a mechanically induced self-sustaining reaction
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2017 |
Influence of milling parameters on the solid-gas synthesis of TiCxN1-x by mechanically induced self-sustaining reaction
|
POWDER TECHNOLOGY |
Artículo | 2017 |
Magnetostrictive properties of FeAl/polyester and FeAl/silicone composites
|
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS |
Artículo | 2017 |
Size effect and scaling power-law for superelasticity in shape-memory alloys at the nanoscale
|
NATURE NANOTECHNOLOGY |
Artículo | 2017 |
Wear damage of TiTaCN-Co cermets at room and elevated temperatures
|
Procedia Structural Integrity |
Artículo | 2016 |
Atom probe tomography analysis of InAlGaAs capped In As/GaAs stacked quantum dots with variable barrier layer thickness
|
ACTA MATERIALIA |
Artículo | 2016 |
Atom-scale compositional distribution in InAlAsSb-based triple junction solar cells by atom probe tomography
|
NANOTECHNOLOGY |
Artículo | 2016 |
Behaviour of freeze-casting iron oxide for purifying hydrogen streams by steam-iron process
|
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
Artículo | 2016 |
Combining XRF and GRT for the analysis of ancient silver coins
|
MICROCHEMICAL JOURNAL |
Artículo | 2016 |
CVD synthesis of carbon spheres using NiFe-LDHs as catalytic precursors: structural, electrochemical and magnetoresistive properties
|
JOURNAL OF MATERIALS CHEMISTRY C |
Artículo | 2016 |
Design, processing and characterization of materials with controlled radial porosity for biomedical and nuclear applications
|
Key engineering materials |
Artículo | 2016 |
Design, processing and characterization of titanium with radial graded porosity for bone implants
|
MATERIALS & DESIGN |
Artículo | 2016 |
High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets
|
CORROSION SCIENCE |
Artículo | 2016 |
Hot-pressing of (Ti,Mt)(C,N)-Co-Mo2C (Mt = Ta,Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction
|
CHEMICAL ENGINEERING JOURNAL |
Ponencia | 2016 |
Hydrogen streams purification with Steam-Iron using Freeze-Casting iron oxides
|
WHEC 2016 - 21st World Hydrogen Energy Conference 2016, Proceedings |
Artículo | 2016 |
Kinetics of high-temperature oxidation of (Ti,Ta)(C,N)-based cermets
|
CORROSION SCIENCE |
Artículo | 2016 |
Small-pore driven high capacitance in a hierarchical carbon via carbonization of Ni-MOF-74 at low temperatures
|
CHEMICAL COMMUNICATIONS |
Artículo | 2016 |
TiTaCN-Co cermets prepared by mechanochemical technique: microstructure and mechanical properties
|
Procedia Engineering |
Artículo | 2015 |
3D compositional analysis at atomic scale of InAlGaAs capped InAs/GaAs QDs
|
SCRIPTA MATERIALIA |
Artículo | 2015 |
Aumento de la tenacidad de fractura en cermets basados en carbonitruro de titanio mediante la adición de grafito
|
Anales de Mecánica de la Fractura |
Artículo | 2015 |
Diseño y fabricación de laminados tipo ti(c,n)-co/wc-co con un potencial equilibrio de propiedades en servicio
|
Anales de Mecánica de la Fractura |
Ponencia | 2015 |
EVALUATING AND RETHINKING THE LABORATORY PRACTICES IN CHEMISTRY DEGREES OF HIGHER EDUCATION
|
EDULEARN15: 7TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES |
Artículo | 2015 |
Mapping the plasmonic response of gold nanoparticles embedded in TiO2 thin films
|
NANOTECHNOLOGY |
Artículo | 2015 |
Microstructure of Fe2O3 scaffolds created by freeze-casting and sintering
|
MATERIALS LETTERS |
Artículo | 2015 |
Nanoindentation of (Ti,Ta)(C,N)-Co cermets prepared by methods of mechanochemistry
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2015 |
Resistencia mecánica de carburos cementados: Influencia de la temperatura y la microestructura
|
Anales de Mecánica de la Fractura |
Ponencia | 2015 |
TEACHING ENGINEERING IN THE EUROPEAN HIGHER EDUCATION AREA
|
EDULEARN15: 7TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES |
Artículo | 2015 |
Toughening of complete solid solution cermets by graphite addition
|
CHEMICAL ENGINEERING JOURNAL |
Artículo | 2014 |
Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending
|
MATERIALS & DESIGN |
Artículo | 2014 |
Defect reduction in heteroepitaxial InP on Si by epitaxial lateral overgrowth
|
MATERIALS EXPRESS |
Artículo | 2014 |
Dispersion of carbon nanotubes in iron by wet processing for the preparation of iron-carbon nanotube composites
|
POWDER TECHNOLOGY |
Artículo | 2014 |
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions
|
MATERIALS & DESIGN |
Artículo | 2014 |
Enhanced oxidation resistance of Ti(C,N)-based cermets containing Ta
|
CORROSION SCIENCE |
Artículo | 2014 |
Instrumented indentation of composite materials prepared by methods of mechanochemistry
|
Key engineering materials |
Artículo | 2014 |
Processing and characterisation of cermet/hardmetal laminates with strong interfaces
|
MATERIALS & DESIGN |
Artículo | 2013 |
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta) (C,N)-based cermets
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2013 |
Fabrication of Needle-Shaped Specimens Containing Subsurface Nanostructures for Electron Tomography
|
FIB NANOSTRUCTURES |
Artículo | 2013 |
Influence of Soft Drinks with Low pH on Different Ni-Ti Orthodontic Archwire Surface Patterns
|
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
Artículo | 2013 |
Liquid-phase sintering of Ti(C,N)-based cermets. The effects of binder nature and content on the solubility and wettability of hard ceramic phases
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Artículo | 2013 |
Spark plasma sintering of TixTa1-xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties
|
CHEMICAL ENGINEERING JOURNAL |
Artículo | 2013 |
Strain analysis for the prediction of the preferential nucleation sites of stacked quantum dots by combination of FEM and APT
|
NANOSCALE RESEARCH LETTERS |
Artículo | 2012 |
A methodology for the fabrication by FIB of needle-shape specimens around sub-surface features at the nanometre scale
|
MICRON |
Artículo | 2012 |
Absence of the core-rim microstructure in TixTa1-xCyN1-y-based cermets developed from a pre-sintered carbonitride master alloy
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2012 |
Analysis of the 3D distribution of stacked self-assembled quantum dots by electron tomography
|
NANOSCALE RESEARCH LETTERS |
Artículo | 2012 |
Development of multicomponent-multiphase materials based on (Ti,Ta,Nb)CxN1-x carbonitride solid solutions
|
CHEMICAL ENGINEERING JOURNAL |
Artículo | 2012 |
In Situ Synthesis of Ceramic Composite Materials in the Ti-B-C-N System by a Mechanically Induced Self-Sustaining Reaction
|
JOURNAL OF THE AMERICAN CERAMIC SOCIETY |
Ponencia | 2012 |
Integration of cermet component materials into a solid solution master alloys by mechanically self-sustaining reaction
|
Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012 |
Artículo | 2012 |
Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2012 |
Modelling of three powder compaction laws for cold die pressing
|
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH |
Artículo | 2012 |
Spark plasma sintering of TiyNb1-yCxN1-x monolithic ceramics obtained by mechanically induced self-sustaining reaction
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
Artículo | 2011 |
Compositional Mapping by Z-Contrast Imaging
|
MICROSCOPY AND MICROANALYSIS |
Artículo | 2011 |
Formation of the complete range of Ti5Si3-xGex solid solutions via mechanically induced self-sustained reactions
|
INTERMETALLICS |
Artículo | 2011 |
Influence of topographical features on the fluoride corrosion of Ni-Ti orthodontic archwires
|
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE |
Artículo | 2011 |
Light Emission from Nanocrystalline Si Inverse Opals and Controlled Passivation by Atomic Layer Deposited Al2O3
|
ADVANCED MATERIALS |
Artículo | 2011 |
Novel Method of Preparation of Gold-Nanoparticle-Doped TiO2 and SiO2 Plasmonic Thin Films: Optical Characterization and Comparison with Maxwell-Garnett Modeling
|
ADVANCED FUNCTIONAL MATERIALS |
Ponencia | 2011 |
Protagonismo del mentor en una actividad tutorial de carácter multidisciplinar en Ingeniería
|
XIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: Libro de Resúmenes |
Artículo | 2011 |
Relationship between the surface defects and the manufacturing process of orthodontic Ni-Ti archwires
|
MATERIALS LETTERS |
Artículo | 2011 |
Strain balanced quantum posts
|
APPLIED PHYSICS LETTERS |
Artículo | 2010 |
Estudio del efecto de la modificación superficial de monolitos metálicos en el anclaje de catalizadores
|
Tratamientos Térmicos |
Ponencia | 2010 |
STRAIN BALANCED QUANTUM POSTS FOR INTERMEDIATE BAND SOLAR CELLS
|
35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE |
Artículo | 2009 |
Determination of nitrogen partitioning coefficients in superduplex stainless steels by NRA using a nuclear microprobe
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Ponencia | 2008 |
Estudio del efecto de la modificación superficial de monolitos metálicos en el anclaje de catalizadores
|
TRATERMAT 2008: [actas del] XI Congreso Nacional de Tratamientos Térmicos y de Superficie, Valencia, 12 y 13 de marzo de 2008 |
Artículo | 2008 |
Preparation of Au-CeO2 and Au-Al2O3/AISI 304 austenitic stainless steel monoliths and their performance in the catalytic oxidation of CO
|
CHEMICAL ENGINEERING JOURNAL |
Ponencia | 2008 |
Propiedades mecánicas y resistencia a la corrosión en aceros inoxidables superdúplex con contenidos elevados en W
|
TRATERMAT 2008: [actas del] XI Congreso Nacional de Tratamientos Térmicos y de Superficie, Valencia, 12 y 13 de marzo de 2008 |
Artículo | 2007 |
Electrical properties of bio-SiC and Si components of the SiC/Si biomorphic composite
|
PHYSICS OF THE SOLID STATE |
Ponencia | 2007 |
Fischer-tropsch catalyst deposition on metallic structured supports
|
Studies in Surface Science and Catalysis |
Artículo | 2007 |
Heat capacity of silicon carbide at low temperatures
|
PHYSICS OF THE SOLID STATE |
Artículo | 2007 |
Structural and oxidation studies of titanium beryllides
|
NUCLEAR TECHNOLOGY |
Artículo | 2007 |
The role of silicon in the reactive-elements effect on the oxidation of conventional austenitic stainless steel
|
OXIDATION OF METALS |
Artículo | 2007 |
Thermal conductivity of bio-SiC and the Si embedded in cellular pores of the SiC/Si biomorphic composite
|
PHYSICS OF THE SOLID STATE |
Artículo | 2006 |
Composites by aluminum infiltration of porous silicon carbide derived from wood precursors
|
SCRIPTA MATERIALIA |
Artículo | 2006 |
Elastic and inelastic properties of SiC/Si biomorphic composites and biomorphic SiC based on oak and eucalyptus
|
PHYSICS OF THE SOLID STATE |
Artículo | 2006 |
Ion beam characterisation of ODS steel samples after long term annealing conditions
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Artículo | 2006 |
Microstructure and fracture properties of biomorphic SiC
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Ponencia | 2006 |
Phase transformation and structural studies of EUROFER RAFM alloy
|
Materials Science Forum |
Artículo | 2006 |
Precursor selection and its role in the mechanical properties of porous SiC derived from wood
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
Ponencia | 2006 |
Processing, microstructure and mechanical behavior of sic-based ceramics via naturally derived scaffolds
|
MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES II |
Artículo | 2005 |
Anisotropy of electric resistivity of Sapele-boased biomorphic SiC/Si composites
|
PHYSICS OF THE SOLID STATE |
Artículo | 2005 |
Aplicaciones del SiC biomórfico como reforzante estructural en hormigones refractarios
|
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO |
Artículo | 2005 |
Characterization and stability studies of titanium beryllides
|
FUSION ENGINEERING AND DESIGN |
Artículo | 2005 |
Mechanical behavior of biomorphic Si/SiC porous composites
|
SCRIPTA MATERIALIA |
Artículo | 2005 |
Microestructura y propiedades mecánicas del SiC biomórfico obtenido a partir de eucalipto
|
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO |
Artículo | 2005 |
Microstructural characterization of Eurofer-ODS RAFM steel in the normalized and tempered simulated condition and after thermal aging in fusion conditions
|
FUSION ENGINEERING AND DESIGN |
Artículo | 2005 |
Propiedades mecánicas de sic biomórfico poroso
|
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO |
Artículo | 2004 |
Comportamiento mecánico de materiales compuestos biomórficos SIC/C en función de la temperatura
|
Anales de Mecánica de la Fractura |
Artículo | 2004 |
Li ceramic pebbles chemical compatibility with Eurofer samples in fusion relevant conditions
|
JOURNAL OF NUCLEAR MATERIALS |
Capítulo | 2003 |
Aceros inoxidables ferrítico-martensíticos para aplicaciones en centrales nucleares
|
Avances en ciencia y tecnología del acero inoxidable II |
Ponencia | 2003 |
Friction and tribological behavior of (Ti, V)C-Co cermets
|
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
Artículo | 2003 |
High temperature chemical compatibility between SiC composites and Be pebbles
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Capítulo | 2003 |
La espectroscopia GD-OES aplicada al estudio superficial de la oxidación a alta temperatura de aceros inoxidables
|
Avances en ciencia y tecnología del acero inoxidable II |
Capítulo | 2003 |
Oxidación a alta temperatura de los aceros inoxidables
|
Avances en ciencia y tecnología del acero inoxidable II |
Artículo | 2003 |
Structural characterisation of SiC/SiCf composites exposed to chemical interaction with Be at high temperature
|
FUSION ENGINEERING AND DESIGN |
Artículo | 2002 |
Application of atomic and nuclear techniques to the study of inhomogeneities in electrodeposited alpha-particle sources
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Artículo | 2002 |
Determination of nitrogen in metallic phases using the 14N(d, pγ)15N nuclear reaction
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Artículo | 2002 |
High temperature oxidation of a high N, high Si, Mn free austenitic stainless steel
|
Materials Science Forum |
Artículo | 2002 |
Influence of preoxidation and annealing treatments on the isothermal oxidation in air at 1173 K of cerium-implanted EN-1.4301 stainless steel
|
OXIDATION OF METALS |
Ponencia | 2002 |
Measurement of (p,p) elastic cross-sections for 14N and 27Al at laboratory angles of 178° and 140° in the range 0.5 2.5 MeV
|
Materials Science Forum |
Artículo | 2002 |
Measurement of (p,p) elastic differential cross-sections for carbon, nitrogen, oxygen, aluminium and silicon in the 500-2500 keV range at 140 degrees and 178 degrees laboratory scattering angles
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Ponencia | 2002 |
Microestructura y propiedades mecánicas de SiC bimórfico a partir de madera de jara
|
VIII Congreso de Propiedades Mecánicas de Sólidos: Gandía, 2002 |
Artículo | 2002 |
Solubility of uranium at very low concentration in RAFM steel
|
JOURNAL OF NUCLEAR MATERIALS |
Artículo | 2002 |
Young's modulus of (Ti,Si)N films by surface acoustic waves and indentation techniques
|
THIN SOLID FILMS |
Artículo | 2001 |
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
Artículo | 2001 |
Ion microprobe study of the scale formed during high temperature oxidation of high silicon EN-1.4301 stainless steel
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Artículo | 2001 |
Low cost rare earth elements deposition method for enhancing the oxidation resistance at high temperature of Cr2O3 and Al2O3 forming alloys
|
JOURNAL OF ALLOYS AND COMPOUNDS |
Ponencia | 2001 |
On the sintering of TIC-VC-Co hardmetals
|
Advances in Powder Metallurgy and Particulate Materials : Proceedings of the Powder Metallurgy World Congress |
Artículo | 2001 |
Study of solid-state reactions of SiC/SiCf composites using microbeams
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Ponencia | 2001 |
TiC-VC-Co: a study on its sintering and microstructure
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
Artículo | 2000 |
Experimental and molecular dynamics simulation analysis of lacro(3) precipitation in chromia scales
|
ACTA MATERIALIA |
Artículo | 2000 |
High-temperature oxidation behaviour of EN-1.4301 stainless-steel after surface Ce deposition by a modified CVD method
|
SURFACE AND INTERFACE ANALYSIS |
Artículo | 2000 |
In situ DRIFTS study of the adsorption-oxidation of CH3OH on V2O5
|
JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL |
Artículo | 2000 |
Micron-scale analysis of SiC/SiCf composites using the new Lisbon nuclear microprobe
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Artículo | 2000 |
Surface studies of SiC/SiCf composites exposed to relevant fusion reactor conditions
|
SURFACE AND INTERFACE ANALYSIS |
Artículo | 2000 |
XPS and DRIFTS study of cerium in Ce-Si-Al-O-N glasses
|
Materials Science Forum |
Artículo | 1999 |
X-ray diffraction study of oxide scales formed at high temperatures on AISI 304 stainless steel after cerium deposition
|
OXIDATION OF METALS |
Artículo | 1998 |
Analysis of the elements sputtered during the lanthanum implantation in stainless steels
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Artículo | 1998 |
Anomalous scattering study of oxide scales formed at 1173 K on surface modified stainless steel
|
JOURNAL OF MATERIALS CHEMISTRY |
Artículo | 1998 |
Oxide scale depth profiling of lanthanum-deposited AISI-304: an ion beam analysis
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
Ponencia | 1997 |
Recovering of metals from solid wastes by redox processes in glass molten media
|
PROCEEDINGS OF THE NINTH INTERNATIONAL CONFERENCE ON HIGH TEMPERATURE MATERIALS CHEMISTRY |