Artículo | 2024 |
3D-printed implants loaded with acriflavine for glioblastoma treatment
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2024 |
3D-printing of dipyridamole/thermoplastic polyurethane materials for bone regeneration
|
Drug Delivery and Translational Research |
Artículo | 2024 |
Chitosan-Type-A-Gelatin Hydrogels Used as Potential Platforms in Tissue Engineering for Drug Delivery
|
Gels (Basel, Switzerland) |
Artículo | 2024 |
Clopidogrel-loaded vascular grafts prepared using digital light processing 3D printing
|
Drug Delivery and Translational Research |
Artículo | 2024 |
Comparative Effect of Antioxidant and Antibacterial Potential of Zinc Oxide Nanoparticles from Aqueous Extract of Nepeta nepetella through Different Precursor Concentrations.
|
MATERIALS |
Artículo | 2024 |
Current trends in 3D printed gastroretentive floating drug delivery systems: A comprehensive review.
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2024 |
Enhancement of skin localization of β-carotene from red fruit (Pandanus conoideus Lam.) using solid dispersion-thermoresponsive gel delivered via polymeric solid microneedles
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2024 |
Formulation and evaluation of red fruit (Pandanus conoideus) oil-based nanoemulsion loaded thermosensitive gel combined with solid microneedle for topical delivery
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
Artículo | 2024 |
Olive pits-based carbon black agglomerate as an adsorbent for pipette-tip solid-phase extraction for the determination of caffeine in energy drinks
|
CELLULOSE CHEMISTRY AND TECHNOLOGY |
Artículo | 2024 |
Reservoir-type intranasal implants for sustained release of risperidone: A potential alternative for long-term treatment of schizophrenia
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
Artículo | 2024 |
Surface modification of titanium foams for modulated and targeted release of drug-loaded biocompatible hydrogel. Proof of concept
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
Artículo | 2023 |
Antioxidant cellulose nanofibers/lignin-based aerogels: a potential material for biomedical applications
|
Chemical and Biological Technologies in Agriculture |
Artículo | 2023 |
Comparison between polymeric excipients using SeDeM expert system in combination with mathematical modeling and quality control tools
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
Corrección | 2023 |
Corrigendum to “Development of intranasal implantable devices for schizophrenia treatment” [Int. J. Pharm. 624 (2021) 122061] (International Journal of Pharmaceutics (2022) 624, (S0378517322006159), (10.1016/j.ijpharm.2022.122061))
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2023 |
Development of 3D-printed subcutaneous implants using concentrated polymer/drug solutions
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2023 |
Development of 3D-printed vaginal devices containing metronidazole for alternative bacterial vaginosis treatment
|
International Journal of Pharmaceutics: X |
Revisión | 2023 |
Drug delivery systems for thyroid disease treatment: A mini review on current therapies and alternative approaches
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
Artículo | 2023 |
Drug loaded implantable devices to treat cardiovascular disease
|
EXPERT OPINION ON DRUG DELIVERY |
Artículo | 2023 |
Extrusion-based technologies for 3D printing: a comparative study of the processability of thermoplastic polyurethane-based formulations.
|
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY |
Artículo | 2023 |
Fabrication and Characterisation of 3D-Printed Triamcinolone Acetonide-Loaded Polycaprolactone-Based Ocular Implants.
|
PHARMACEUTICS |
Artículo | 2023 |
Fabrication and characterisation of poly(sulfonated) and poly(sulfonic acid) dissolving microneedles for delivery of antibiotic and antifungal agents
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2023 |
Liposome-loaded polymeric microneedles for enhanced skin deposition of rifampicin.
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2023 |
Microneedle array-based electrochemical sensor functionalized with SWCNTs for the highly sensitive monitoring of MDMA in interstitial fluid
|
MICROCHEMICAL JOURNAL |
Artículo | 2023 |
Poly(caprolactone)/lignin-based 3D-printed dressings loaded with a novel combination of bioactive agents for wound-healing applications
|
Sustainable Materials and Technologies |
Artículo | 2023 |
Radiolabeled risperidone microSPECT/CT imaging for intranasal implant studies development
|
PHARMACEUTICS |
Editorial | 2023 |
Recent Advances in Polymers as Matrices for Drug Delivery Applications
|
PHARMACEUTICALS |
Artículo | 2023 |
Solid Dispersion Incorporated into Dissolving Microneedles for Improved Antifungal Activity of Amphotericin B: In Vivo Study in a Fungal Keratitis Model
|
MOLECULAR PHARMACEUTICS |
Revisión | 2023 |
Solid implantable devices for sustained drug delivery
|
ADVANCED DRUG DELIVERY REVIEWS |
Artículo | 2023 |
Transdermal on-demand drug delivery based on an iontophoretic hollow microneedle array system
|
LAB ON A CHIP |
Artículo | 2023 |
Wearable Microneedle-Based Array Patches for Continuous Electrochemical Monitoring and Drug Delivery: Toward a Closed-Loop System for Methotrexate Treatment
|
ACS Sensors |
Editorial | 2022 |
3D printing for the development of implantable devices for cardiovascular disease treatment
|
THERAPEUTIC DELIVERY |
Artículo | 2022 |
3D-printed implantable devices with biodegradable rate-controlling membrane for sustained delivery of hydrophobic drugs
|
DRUG DELIVERY |
Artículo | 2022 |
3D-printed reservoir-type implants containing poly(lactic acid)/poly (caprolactone) porous membranes for sustained drug delivery
|
Biomaterials Advances |
Artículo | 2022 |
A New and Sensitive HPLC-UV Method for Rapid and Simultaneous Quantification of Curcumin and D-Panthenol: Application to In Vitro Release Studies of Wound Dressings
|
MOLECULES |
Artículo | 2022 |
Amphotericin B- and Levofloxacin-Loaded Chitosan Films for Potential Use in Antimicrobial Wound Dressings: Analytical Method Development and Its Application
|
PHARMACEUTICS |
Artículo | 2022 |
Design and Development of Levodopa Loaded Polymeric Nanoparticles for Intranasal Delivery
|
PHARMACEUTICALS |
Artículo | 2022 |
Development of intranasal implantable devices for schizophrenia treatment
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2022 |
Elucidating the Impact of Surfactants on the Performance of Dissolving Microneedle Array Patches
|
MOLECULAR PHARMACEUTICS |
Artículo | 2022 |
Inclusion Complexes of Rifampicin with Native and Derivatized Cyclodextrins: In Silico Modeling, Formulation, and Characterization
|
PHARMACEUTICALS |
Letter | 2022 |
Layered Double Hydroxides (LDH) as adsorbent material in decontamination of water contaminated by azo dyes
|
Bionatura |
Artículo | 2022 |
Metronidazole nanosuspension loaded dissolving microarray patches: An engineered composite pharmaceutical system for the treatment of skin and soft tissue infection
|
Biomaterials Advances |
Artículo | 2022 |
Soluplus (R)-based dissolving microarray patches loaded with colchicine: towards a minimally invasive treatment and management of gout
|
BIOMATERIALS SCIENCE |
Artículo | 2022 |
TPU-based antiplatelet cardiovascular prostheses prepared using fused deposition modelling
|
MATERIALS & DESIGN |
Artículo | 2022 |
Valorization of Kraft Lignin from Black Liquor in the Production of Composite Materials with Poly(caprolactone) and Natural Stone Groundwood Fibers
|
POLYMERS |
Artículo | 2022 |
Wearable hollow microneedle sensing patches for the transdermal electrochemical monitoring of glucose
|
TALANTA |
Artículo | 2021 |
3D printed estradiol-eluting urogynecological mesh implants: Influence of material and mesh geometry on their mechanical properties
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Capítulo | 2021 |
Classification, material types, and design approaches of long-acting and implantable drug delivery systems
|
Long-Acting Drug Delivery Systems: Pharmaceutical, Clinical, and Regulatory Aspects |
Artículo | 2021 |
Development and validation of a high-performance liquid chromatography method for levothyroxine sodium quantification in plasma for pre-clinical evaluation of long-acting drug delivery systems
|
Analytical Methods |
Artículo | 2021 |
Development of drug loaded cardiovascular prosthesis for thrombosis prevention using 3D printing
|
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS |
Artículo | 2021 |
Dissolving microneedle patches loaded with amphotericin B microparticles for localised and sustained intradermal delivery: Potential for enhanced treatment of cutaneous fungal infections Ke
|
JOURNAL OF CONTROLLED RELEASE |
Artículo | 2021 |
Enhancing intradermal delivery of tofacitinib citrate: Comparison between powder-loaded hollow microneedle arrays and dissolving microneedle arrays
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Capítulo | 2021 |
Fabrication of lignin-based hydrogels and their applications
|
Lignin-based Materials for Biomedical Applications: Preparation, Characterization, and Implementation |
Artículo | 2021 |
Fused deposition modelling for the development of drug loaded cardiovascular prosthesis
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Revisión | 2021 |
Hollow microneedles: A perspective in biomedical applications
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2021 |
HPLC method for levothyroxine quantification in long-acting drug delivery systems. Validation and evaluation of bovine serum albumin as levothyroxine stabilizer
|
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS |
Artículo | 2021 |
Hydrogel-forming microneedles for rapid and efficient skin deposition of controlled release tip-implants
|
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS |
Artículo | 2021 |
Poly(caprolactone)-based subcutaneous implant for sustained delivery of levothyroxine
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Revisión | 2021 |
The role of microneedle arrays in drug delivery and patient monitoring to prevent diabetes induced fibrosis
|
ADVANCED DRUG DELIVERY REVIEWS |
Artículo | 2021 |
Use of 3D Printing for the Development of Biodegradable Antiplatelet Materials for Cardiovascular Applications
|
PHARMACEUTICALS |
Artículo | 2021 |
Versatility of hydrogel-forming microneedles in in vitro transdermal delivery of tuberculosis drugs
|
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS |
Artículo | 2020 |
3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery
|
PHARMACEUTICS |
Editorial | 2020 |
Additive Manufacturing Can Assist in the Fight Against COVID-19 and Other Pandemics and Impact on the Global Supply Chain
|
3D PRINTING AND ADDITIVE MANUFACTURING |
Revisión | 2020 |
Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review
|
APPLIED SCIENCES-BASEL |
Artículo | 2020 |
Coagulation-Flocculation as an Alternative Way to Reduce the Toxicity of the Black Liquor from the Paper Industry: Thermal Valorization of the Solid Biomass Recovered
|
WASTE AND BIOMASS VALORIZATION |
Artículo | 2020 |
Development and characterisation of novel poly (vinyl alcohol)/poly (vinyl pyrrolidone)-based hydrogel-forming microneedle arrays for enhanced and sustained transdermal delivery of methotrexate
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2020 |
Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing
|
PHARMACEUTICS |
Artículo | 2020 |
Development of high-performance binderless fiberboards from wheat straw residue
|
CONSTRUCTION AND BUILDING MATERIALS |
Artículo | 2020 |
Evaluation of the potential of alternative vegetable materials for production of paper through kraft processes
|
CELLULOSE CHEMISTRY AND TECHNOLOGY |
Artículo | 2020 |
Industrial application of orange tree nanocellulose as papermaking reinforcement agent
|
CELLULOSE |
Artículo | 2020 |
Lignin for pharmaceutical and biomedical applications - Could this become a reality?
|
Sustainable Chemistry and Pharmacy |
Artículo | 2020 |
Lignin/poly(butylene succinate) composites with antioxidant and antibacterial properties for potential biomedical applications
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
Artículo | 2020 |
Plasmonic photothermal microneedle arrays and single needles for minimally-invasive deep in-skin hyperthermia
|
JOURNAL OF MATERIALS CHEMISTRY B |
Artículo | 2020 |
Poly(caprolactone)-Based Coatings on 3D-Printed Biodegradable Implants: A Novel Strategy to Prolong Delivery of Hydrophilic Drugs
|
MOLECULAR PHARMACEUTICS |
Artículo | 2020 |
Potential of Polymeric Films Loaded with Gold Nanorods for Local Hyperthermia Applications
|
NANOMATERIALS |
Revisión | 2020 |
Urogynecological surgical mesh implants: New trends in materials, manufacturing and therapeutic approaches
|
INTERNATIONAL JOURNAL OF PHARMACEUTICS |
Artículo | 2019 |
Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications
|
PHARMACEUTICS |
Artículo | 2019 |
Fused Deposition Modeling as an Effective Tool for Anti-Infective Dialysis Catheter Fabrication
|
ACS Biomaterials Science and Engineering |
Revisión | 2019 |
Fused Deposition Modelling as a Potential Tool for Antimicrobial Dialysis Catheters Manufacturing: New Trends vs. Conventional Approaches
|
COATINGS |
Artículo | 2019 |
Lignin and Cellulose Blends as Pharmaceutical Excipient for Tablet Manufacturing via Direct Compression
|
BIOMOLECULES |
Artículo | 2019 |
Poly(methyl vinyl ether-co-maleic acid) Hydrogels Containing Cyclodextrins and Tween 85 for Potential Application as Hydrophobic Drug Delivery Systems
|
MACROMOLECULAR RESEARCH |
Artículo | 2018 |
Approaching a new generation of fiberboards taking advantage of self lignin as green adhesive
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
Artículo | 2018 |
Aqueous acetone fractionation of kraft, organosolv and soda lignins
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
Artículo | 2018 |
Environmentally friendly lignocellulose nanofibres from barley straw
|
CELLULOSE CHEMISTRY AND TECHNOLOGY |
Revisión | 2018 |
Implantable Polymeric Drug Delivery Devices: Classification, Manufacture, Materials, and Clinical Applications
|
POLYMERS |
Artículo | 2018 |
Lignin-based hydrogels with "super-swelling" capacities for dye removal
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
Artículo | 2018 |
Recycled fibers for fluting production: The role of lignocellulosic micro/nanofibers of banana leaves
|
JOURNAL OF CLEANER PRODUCTION |
Artículo | 2018 |
Synthesis and Characterization of Lignin Hydrogels for Potential Applications as Drug Eluting Antimicrobial Coatings for Medical Materials
|
ACS SUSTAINABLE CHEMISTRY & ENGINEERING |
Artículo | 2017 |
A comparative study of the suitability of different cereal straws for lignocellulose nanofibers isolation
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
Artículo | 2017 |
Desarrollo de lecciones sobre reactores químicos y biológicos en la plataforma Moodle
|
Revista de innovación y buenas prácticas docentes |
Artículo | 2017 |
Isolation and Characterization of Gramineae and Fabaceae Soda Lignins
|
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES |
Artículo | 2017 |
Isolation and characterization of lignins from wheat straw: Application as binder in lithium batteries
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
Resumen congreso | 2017 |
Lignin-based hydrogels with super-swelling capacities
|
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY |
Artículo | 2017 |
Rapidly growing vegetables as new sources for lignocellulose nanofibre isolation: Physicochemical, thermal and rheological characterisation
|
CARBOHYDRATE POLYMERS |
Artículo | 2017 |
The effect of pre-treatment on the production of lignocellulosic nanofibers and their application as a reinforcing agent in paper
|
CELLULOSE |
Artículo | 2017 |
The suitability of banana leaf residue as raw material for the production of high lignin content micro/nano fibers: From residue to value-added products
|
INDUSTRIAL CROPS AND PRODUCTS |
Artículo | 2016 |
Biorefinery Process Combining Specel (R) Process and Selective Lignin Precipitation using Mineral Acids
|
BIORESOURCES |
Artículo | 2016 |
Isolation and characterization of lignocellulose nanofibers from different wheat straw pulps
|
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |