COEM - Prisma - Unidad de Bibliometría

CARACTERIZACIÓN Y OPTIMIZACIÓN ESTADÍSTICA DE MEDICAMENTOS - CTS-547 (COEM)

Tipo de colectivo: Grupo de investigación
Estado: Grupo definitivo
Ámbito: Andalucía
Instituciones: Universidad de Sevilla
Fecha de creación: 07/07/2004

Investiga en

Tipo Año Título Fuente
Artículo2024 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives PHARMACEUTICS
Artículo2024 3D-printed implants loaded with acriflavine for glioblastoma treatment INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2024 Amorphous solid dispersion of a binary formulation with felodipine and HPMC for 3D printed floating tablets. INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2024 Application of ultrasound-assisted compression and 3D-printing semi-solid extrusion techniques to the development of sustained-release drug delivery systems based on a novel biodegradable aliphatic copolyester JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2024 Chitosan-Type-A-Gelatin Hydrogels Used as Potential Platforms in Tissue Engineering for Drug Delivery Gels (Basel, Switzerland)
Artículo2024 Clopidogrel-loaded vascular grafts prepared using digital light processing 3D printing Drug Delivery and Translational Research
Artículo2024 Comparative Effect of Antioxidant and Antibacterial Potential of Zinc Oxide Nanoparticles from Aqueous Extract of Nepeta nepetella through Different Precursor Concentrations. MATERIALS
Artículo2024 Comparison of synthetic pathways for obtaining fluorescent nanomaterials based on halloysite and carbon dots for potential biological sensing. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
Corrección2024 Corrigendum to “Aloe vera and copaiba oleoresin-loaded chitosan films for wound dressings: Microbial permeation, cytotoxicity, and in vivo proof of concept” [Int. J. Pharm. 634 (2023) 122648] (International Journal of Pharmaceutics (2023) 634, (S0378517323000686), (10.1016/j.ijpharm.2023.122648)) INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2024 Current trends in 3D printed gastroretentive floating drug delivery systems: A comprehensive review. INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2024 Deepvirusclassifier: a deep learning tool for classifying SARS-CoV-2 based on viral subtypes within the coronaviridae family BMC BIOINFORMATICS
Artículo2024 Enhancement of skin localization of β-carotene from red fruit (Pandanus conoideus Lam.) using solid dispersion-thermoresponsive gel delivered via polymeric solid microneedles INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2024 Formulation and evaluation of red fruit (Pandanus conoideus) oil-based nanoemulsion loaded thermosensitive gel combined with solid microneedle for topical delivery JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2024 From extraction to stabilization: employing a 22 experimental design in developing nutraceutical-grade Bixin from Bixa orellana l. FOODS
Revisión2024 Next-generation pediatric care: nanotechnology-based and AI-driven solutions for cardiovascular, respiratory, and gastrointestinal disorders WORLD JOURNAL OF PEDIATRICS
Artículo2024 Olive pits-based carbon black agglomerate as an adsorbent for pipette-tip solid-phase extraction for the determination of caffeine in energy drinks CELLULOSE CHEMISTRY AND TECHNOLOGY
Artículo2024 Reservoir-type intranasal implants for sustained release of risperidone: A potential alternative for long-term treatment of schizophrenia JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2024 Surface modification of titanium foams for modulated and targeted release of drug-loaded biocompatible hydrogel. Proof of concept JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2024 Technological study of kaolinitic clays from Fms. Escucha and Utrillas to be used in dermo-pharmaceutical products APPLIED CLAY SCIENCE
Artículo2024 Thixotropic Hydrogels Based on Laponite® and Cucurbituril for Delivery of Lipophilic Drug Molecules CHEMPLUSCHEM
Artículo2024 Thixotropic hydrogels based on Laponite® and Cucurbituril for delivery of lipophilic drug molecules CHEMPLUSCHEM
Artículo2024 Utilizing chaos game representation for enhanced classification of SARS-CoV-2 variants with stacked sparse autoencoders NEURAL COMPUTING & APPLICATIONS
Artículo2023 Aloe vera and copaiba oleoresin-loaded chitosan films for wound dressings: microbial permeation, cytotoxicity, and in vivo proof of concept INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2023 Antioxidant cellulose nanofibers/lignin-based aerogels: a potential material for biomedical applications Chemical and Biological Technologies in Agriculture
Resumen congreso2023 ASSOCIATION OF PRENATAL EXPOSURE TO PHTHALATES AND ENVIRONMENTAL PHENOLS WITH PUBERTAL DEVELOPMENT IN GIRLS AND BOYS FROM THREE EUROPEAN BIRTH COHORTS GACETA SANITARIA
Artículo2023 Biocomposite for Prolonged Release of Water-Soluble Drugs PHARMACEUTICS
Artículo2023 Comparison between polymeric excipients using SeDeM expert system in combination with mathematical modeling and quality control tools JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2023 Conventional and PEGylated Liposomes as Vehicles of Copaifera sabulicola PHARMACEUTICS
Corrección2023 Corrigendum to “Development of intranasal implantable devices for schizophrenia treatment” [Int. J. Pharm. 624 (2021) 122061] (International Journal of Pharmaceutics (2022) 624, (S0378517322006159), (10.1016/j.ijpharm.2022.122061)) INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2023 Development of 3D-Printed Bicompartmental Devices by Dual-Nozzle Fused Deposition Modeling (FDM) for Colon-Specific Drug Delivery. PHARMACEUTICS
Artículo2023 Development of 3D-printed subcutaneous implants using concentrated polymer/drug solutions INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2023 Development of 3D-printed vaginal devices containing metronidazole for alternative bacterial vaginosis treatment International Journal of Pharmaceutics: X
Resumen congreso2023 Diseño y caracterización de un sistema colónico con liberación constante elaborado por impresión en 3D XVI Congreso SEFIG ( 16. 2023. Madrid): Libro de comunicaciones
Revisión2023 Drug delivery systems for thyroid disease treatment: A mini review on current therapies and alternative approaches JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2023 Drug loaded implantable devices to treat cardiovascular disease EXPERT OPINION ON DRUG DELIVERY
Resumen congreso2023 Drug recrystallization on 3D printed tablets: influence on thedrug release XVI Congreso SEFIG ( 16. 2023. Madrid): Libro de comunicaciones
Resumen congreso2023 EFFECTS OF PRENATAL METAL EXPOSURE ON CHILDREN'S TELOMERE LENGTH: A STUDY IN THE INMA PROJECT GACETA SANITARIA
Revisión2023 Environmentally Friendly Strategies for Formulating Vegetable Oil-Based Nanoparticles for Anticancer Medicine PHARMACEUTICS
Artículo2023 Exploiting the interaction between halloysite and charged PNAs for their controlled release JOURNAL OF MATERIALS CHEMISTRY B
Artículo2023 Extrusion-based technologies for 3D printing: a comparative study of the processability of thermoplastic polyurethane-based formulations. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
Artículo2023 Fabrication and Characterisation of 3D-Printed Triamcinolone Acetonide-Loaded Polycaprolactone-Based Ocular Implants. PHARMACEUTICS
Artículo2023 Fabrication and characterisation of poly(sulfonated) and poly(sulfonic acid) dissolving microneedles for delivery of antibiotic and antifungal agents INTERNATIONAL JOURNAL OF PHARMACEUTICS
Capítulo2023 Gelatin-based nanosystems for therapeutic applications Polymeric Nanosystems: Theranostic Nanosystems: Volume 1
Artículo2023 Hydrophilic High Drug-Loaded 3D Printed Gastroretentive System with Robust Release Kinetics. PHARMACEUTICS
Artículo2023 Investigation into Brazilian Palygorskite for Its Potential Use as Pharmaceutical Excipient: Perspectives and Applications MATERIALS
Artículo2023 Liposome-loaded polymeric microneedles for enhanced skin deposition of rifampicin. INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2023 Microneedle array-based electrochemical sensor functionalized with SWCNTs for the highly sensitive monitoring of MDMA in interstitial fluid MICROCHEMICAL JOURNAL
Artículo2023 Modification of halloysite lumen with dopamine derivatives as filler for antibiofilm coating JOURNAL OF COLLOID AND INTERFACE SCIENCE
Artículo2023 Montmorillonite-Rifampicin Nanohybrid for pH-Responsive Release of the Tuberculostatic PHARMACEUTICS
Artículo2023 Nanoformulations based on collagenases loaded into halloysite/Veegum® clay minerals for potential pharmaceutical applications COLLOIDS AND SURFACES B-BIOINTERFACES
Artículo2023 New proposal of viral genome representation applied in the classification of SARS-CoV-2 with deep learning BMC BIOINFORMATICS
Artículo2023 Poly(caprolactone)/lignin-based 3D-printed dressings loaded with a novel combination of bioactive agents for wound-healing applications Sustainable Materials and Technologies
Resumen congreso2023 PRENATAL EXPOSURE TO PHTHALATES AND PUBERTY IN THE INMA-VALENCIA COHORT GACETA SANITARIA
Artículo2023 Radiolabeled risperidone microSPECT/CT imaging for intranasal implant studies development PHARMACEUTICS
Editorial2023 Recent Advances in Polymers as Matrices for Drug Delivery Applications PHARMACEUTICALS
Artículo2023 SARS-CoV-2 virus classification based on stacked sparse autoencoder Computational and Structural Biotechnology Journal
Artículo2023 Solid Dispersion Incorporated into Dissolving Microneedles for Improved Antifungal Activity of Amphotericin B: In Vivo Study in a Fungal Keratitis Model MOLECULAR PHARMACEUTICS
Revisión2023 Solid implantable devices for sustained drug delivery ADVANCED DRUG DELIVERY REVIEWS
Artículo2023 Stereolithographic 3D printing: Formulation design based on percolation thresholds JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2023 Transdermal on-demand drug delivery based on an iontophoretic hollow microneedle array system LAB ON A CHIP
Artículo2023 Wearable Microneedle-Based Array Patches for Continuous Electrochemical Monitoring and Drug Delivery: Toward a Closed-Loop System for Methotrexate Treatment ACS Sensors
Artículo2022 3D Printed Fractal-like Structures with High Percentage of Drug for Zero-Order Colonic Release PHARMACEUTICS
Editorial2022 3D printing for the development of implantable devices for cardiovascular disease treatment THERAPEUTIC DELIVERY
Artículo2022 3D-printed implantable devices with biodegradable rate-controlling membrane for sustained delivery of hydrophobic drugs DRUG DELIVERY
Artículo2022 3D-printed reservoir-type implants containing poly(lactic acid)/poly (caprolactone) porous membranes for sustained drug delivery Biomaterials Advances
Artículo2022 A New and Sensitive HPLC-UV Method for Rapid and Simultaneous Quantification of Curcumin and D-Panthenol: Application to In Vitro Release Studies of Wound Dressings MOLECULES
Artículo2022 A Novel Deep Neural Network Technique for Drug-Target Interaction PHARMACEUTICS
Artículo2022 Amphotericin B- and Levofloxacin-Loaded Chitosan Films for Potential Use in Antimicrobial Wound Dressings: Analytical Method Development and Its Application PHARMACEUTICS
Artículo2022 Assessment of the extrusion process and printability of suspension-type drug-loaded AffinisolTM filaments for 3D printing PHARMACEUTICS
Artículo2022 Chitosan-coated poly (epsilon-caprolactone) nanoparticles as acaricide carriers TICKS AND TICK-BORNE DISEASES
Artículo2022 Clay-Based Hydrogels as Drug Delivery Vehicles of Curcumin Nanocrystals for Topical Application PHARMACEUTICS
Revisión2022 Clays as Vehicles for Drug Photostability PHARMACEUTICS
Capítulo2022 Combination drug delivery system to enhance the transdermal drug delivery of bioactive molecules Combination Drug Delivery Approach as an Effective Therapy for Various Diseases
Artículo2022 Convolutional Neural Network Applied to SARS-CoV-2 Sequence Classification SENSORS
Artículo2022 Design and Development of Levodopa Loaded Polymeric Nanoparticles for Intranasal Delivery PHARMACEUTICALS
Artículo2022 Development and Characterization of Aloe vera Mucilaginous-Based Hydrogels for Psoriasis Treatment JOURNAL OF COMPOSITES SCIENCE
Artículo2022 Development of intranasal implantable devices for schizophrenia treatment INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2022 Elucidating the Impact of Surfactants on the Performance of Dissolving Microneedle Array Patches MOLECULAR PHARMACEUTICS
Artículo2022 Exploring the cellular uptake of hectorite clay mineral and its drug carrier capabilities COLLOIDS AND SURFACES B-BIOINTERFACES
Artículo2022 Extraction and Characterization of beta-Viginin Protein Hydrolysates from Cowpea Flour as a New Manufacturing Active Ingredient Technologies
Artículo2022 Hybrid Lipid/Clay Carrier Systems Containing Annatto Oil for Topical Formulations PHARMACEUTICS
Artículo2022 Inclusion Complexes of Rifampicin with Native and Derivatized Cyclodextrins: In Silico Modeling, Formulation, and Characterization PHARMACEUTICALS
Letter2022 Layered Double Hydroxides (LDH) as adsorbent material in decontamination of water contaminated by azo dyes Bionatura
Revisión2022 Lipid Nanomaterials for Targeted Delivery of Dermocosmetic Ingredients: Advances in Photoprotection and Skin Anti-Aging NANOMATERIALS
Artículo2022 Metronidazole nanosuspension loaded dissolving microarray patches: An engineered composite pharmaceutical system for the treatment of skin and soft tissue infection Biomaterials Advances
Revisión2022 Plant Polysaccharides in Engineered Pharmaceutical Gels Bioengineering (Basel, Switzerland)
Revisión2022 Production Technologies, Regulatory Parameters, and Quality Control of Vaccine Vectors for Veterinary Use Technologies
Artículo2022 Redox-responsive polymersomes as smart doxorubicin delivery systems PHARMACEUTICS
Artículo2022 Soluplus (R)-based dissolving microarray patches loaded with colchicine: towards a minimally invasive treatment and management of gout BIOMATERIALS SCIENCE
Artículo2022 TPU-based antiplatelet cardiovascular prostheses prepared using fused deposition modelling MATERIALS & DESIGN
Artículo2022 Unsupervised Learning Applied to the Stratification of Preterm Birth Risk in Brazil with Socioeconomic Data INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH
Artículo2022 Valorization of Kraft Lignin from Black Liquor in the Production of Composite Materials with Poly(caprolactone) and Natural Stone Groundwood Fibers POLYMERS
Artículo2022 Wearable hollow microneedle sensing patches for the transdermal electrochemical monitoring of glucose TALANTA
Artículo2021 3D printed estradiol-eluting urogynecological mesh implants: Influence of material and mesh geometry on their mechanical properties INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2021 3D printed systems for colon-specific delivery of camptothecin-loaded chitosan micelles EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2021 A biodegradable copolyester, poly(Butylene succinate-co-ε-caprolactone), as a high efficiency matrix former for controlled release of drugs PHARMACEUTICS
Artículo2021 Annatto Oil Loaded Nanostructured Lipid Carriers: A Potential New Treatment for Cutaneous Leishmaniasis PHARMACEUTICS
Resumen congreso2021 Assessment of extrusion process of drug-loaded filaments for 3D printing: metformin and AffinisolTM RESCIFAR Revista Española de Ciencias Farmacéuticas
Capítulo2021 Classification, material types, and design approaches of long-acting and implantable drug delivery systems Long-Acting Drug Delivery Systems: Pharmaceutical, Clinical, and Regulatory Aspects
Artículo2021 Comparison of the performance of two grades of metformin hydrochloride elaboration by means of the SeDeM system, compressibility, compactability, and process capability indices. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo2021 Critical points for predicting 3D printable filaments behaviour JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2021 Development and validation of a high-performance liquid chromatography method for levothyroxine sodium quantification in plasma for pre-clinical evaluation of long-acting drug delivery systems Analytical Methods
Artículo2021 Development of drug loaded cardiovascular prosthesis for thrombosis prevention using 3D printing MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS
Resumen congreso2021 Dimensión fractal, una nueva herramienta para la predicción de la capacidad de impresión por FDM RESCIFAR Revista Española de Ciencias Farmacéuticas
Artículo2021 Diseño de estudios Gauge R&R cruzado y anidado para la validación de los modelos matemáticos de Heckel y Ryshkewitch-Duckworth ARS PHARMACEUTICA
Artículo2021 Dissolving microneedle patches loaded with amphotericin B microparticles for localised and sustained intradermal delivery: Potential for enhanced treatment of cutaneous fungal infections Ke JOURNAL OF CONTROLLED RELEASE
Artículo2021 Enhancing intradermal delivery of tofacitinib citrate: Comparison between powder-loaded hollow microneedle arrays and dissolving microneedle arrays INTERNATIONAL JOURNAL OF PHARMACEUTICS
Capítulo2021 Fabrication of lignin-based hydrogels and their applications Lignin-based Materials for Biomedical Applications: Preparation, Characterization, and Implementation
Artículo2021 Fused deposition modelling for the development of drug loaded cardiovascular prosthesis INTERNATIONAL JOURNAL OF PHARMACEUTICS
Revisión2021 Hollow microneedles: A perspective in biomedical applications INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2021 HPLC method for levothyroxine quantification in long-acting drug delivery systems. Validation and evaluation of bovine serum albumin as levothyroxine stabilizer JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
Resumen congreso2021 Hybrid lipid/clay carrier system containing Bixa orellana L.: a tool for drug delivery RESCIFAR Revista Española de Ciencias Farmacéuticas
Artículo2021 Hydrogel-forming microneedles for rapid and efficient skin deposition of controlled release tip-implants MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS
Capítulo2021 Lipid nanoparticles for the treatment of neglected tropical diseases Applications of Nanobiotechnology for Neglected Tropical Diseases
Revisión2021 Lipid-Polymeric Films: Composition, Production and Applications in Wound Healing and Skin Repair PHARMACEUTICS
Artículo2021 Nanocomposite gels of poloxamine and Laponite for beta-Lapachone release in anticancer therapy EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Revisión2021 Narrative review of the role of artificial intelligence to improve aortic valve disease management JOURNAL OF THORACIC DISEASE
Capítulo2021 Natural Polysaccharides From Aloe vera L. Gel (Aloe barbadensis Miller): Processing Techniques and Analytical Methods Polysaccharides: Properties and Applications
Revisión2021 New trends in drug delivery systems for veterinary applications Pharmaceutical Nanotechnology
Artículo2021 Poly(caprolactone)-based subcutaneous implant for sustained delivery of levothyroxine INTERNATIONAL JOURNAL OF PHARMACEUTICS
Resumen congreso2021 Propuesta de metodología de enseñanza-aprendizaje enfocada al estudio de las formulaciones de medicamentos comercializados en España RESCIFAR Revista Española de Ciencias Farmacéuticas
Artículo2021 Solid dispersion of beta-lapachone in PVP K30 and PEG 6000 by spray drying technique JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Revisión2021 The role of microneedle arrays in drug delivery and patient monitoring to prevent diabetes induced fibrosis ADVANCED DRUG DELIVERY REVIEWS
Artículo2021 Use of 3D Printing for the Development of Biodegradable Antiplatelet Materials for Cardiovascular Applications PHARMACEUTICALS
Artículo2021 Versatility of hydrogel-forming microneedles in in vitro transdermal delivery of tuberculosis drugs EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Revisión2020 3D printed drug delivery systems based on natural products PHARMACEUTICS
Artículo2020 3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery PHARMACEUTICS
Editorial2020 Additive Manufacturing Can Assist in the Fight Against COVID-19 and Other Pandemics and Impact on the Global Supply Chain 3D PRINTING AND ADDITIVE MANUFACTURING
Revisión2020 Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review APPLIED SCIENCES-BASEL
Artículo2020 Chaos game representation dataset of SARS-CoV-2 genome DATA IN BRIEF
Artículo2020 Coagulation-Flocculation as an Alternative Way to Reduce the Toxicity of the Black Liquor from the Paper Industry: Thermal Valorization of the Solid Biomass Recovered WASTE AND BIOMASS VALORIZATION
Artículo2020 Comparative analyses of response surface methodology and artificial neural networks on incorporating tetracaine into liposomes BRAZILIAN JOURNAL OF PHARMACEUTICAL SCIENCES
Capítulo2020 Critical Points in Biopolymeric-Controlled Release Matrix Systems Advanced Biopolymeric Systems for Drug Delivery
Artículo2020 Data stream dataset of SARS-CoV-2 genome DATA IN BRIEF
Artículo2020 Development and characterisation of novel poly (vinyl alcohol)/poly (vinyl pyrrolidone)-based hydrogel-forming microneedle arrays for enhanced and sustained transdermal delivery of methotrexate INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2020 Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing PHARMACEUTICS
Artículo2020 Development of high-performance binderless fiberboards from wheat straw residue CONSTRUCTION AND BUILDING MATERIALS
Artículo2020 Evaluation of the potential of alternative vegetable materials for production of paper through kraft processes CELLULOSE CHEMISTRY AND TECHNOLOGY
Revisión2020 Gender differences in aortic valve replacement: Is surgical aortic valve replacement riskier and transcatheter aortic valve replacement safer in women than in men? JOURNAL OF THORACIC DISEASE
Artículo2020 Industrial application of orange tree nanocellulose as papermaking reinforcement agent CELLULOSE
Artículo2020 Lignin for pharmaceutical and biomedical applications - Could this become a reality? Sustainable Chemistry and Pharmacy
Artículo2020 Lignin/poly(butylene succinate) composites with antioxidant and antibacterial properties for potential biomedical applications INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Artículo2020 Loading of 5-aminosalicylic in solid lipid microparticles (SLM) Solubility screening of lipid excipients and physicochemical characterization JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Capítulo2020 Nanoclays in drug delivery systems Clay nanoparticles: properties and applications
Revisión2020 Natural Inorganic Ingredients in Wound Healing CURRENT PHARMACEUTICAL DESIGN
Artículo2020 Plasmonic photothermal microneedle arrays and single needles for minimally-invasive deep in-skin hyperthermia JOURNAL OF MATERIALS CHEMISTRY B
Artículo2020 Poly(caprolactone)-Based Coatings on 3D-Printed Biodegradable Implants: A Novel Strategy to Prolong Delivery of Hydrophilic Drugs MOLECULAR PHARMACEUTICS
Artículo2020 Potential of Polymeric Films Loaded with Gold Nanorods for Local Hyperthermia Applications NANOMATERIALS
Artículo2020 Preparation, characterisation and cell viability of encapsulated Trichoderma asperellum in alginate beads JOURNAL OF MICROENCAPSULATION
Artículo2020 Proposal of the CAD System for Melanoma Detection Using Reconfigurable Computing SENSORS
Artículo2020 Study of pre-formulation and development of solid lipid nanoparticles containing perillyl alcohol JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Revisión2020 Urogynecological surgical mesh implants: New trends in materials, manufacturing and therapeutic approaches INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2019 Achieving High Excipient Efficiency with Elastic Thermoplastic Polyurethane by Ultrasound Assisted Direct Compression PHARMACEUTICS
Artículo2019 Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications PHARMACEUTICS
Revisión2019 Benefits of Fractal Approaches in Solid Dosage Form Development PHARMACEUTICAL RESEARCH
Artículo2019 Design and characterization of a tuberculostatic hybrid based on interaction of ethambutol with a raw palygorskite APPLIED CLAY SCIENCE
Ponencia2019 El uso de una escape room como recurso docente en la Facultad de Farmacia IN-RED 2019: V Congreso de Innovación Educativa y Docencia en Red
Artículo2019 Fused Deposition Modeling as an Effective Tool for Anti-Infective Dialysis Catheter Fabrication ACS Biomaterials Science and Engineering
Revisión2019 Fused Deposition Modelling as a Potential Tool for Antimicrobial Dialysis Catheters Manufacturing: New Trends vs. Conventional Approaches COATINGS
Ponencia2019 Implementacion de una escape room multidisciplinar como herramienta de aprendizaje en la Facultad de Farmacia: Farmaescape Evaluación de la calidad de la investigación y de la educación superior: XVI FECIES. Libro de actas
Revisión2019 Innovative nanocompounds for cutaneous administration of classical antifungal drugs: a systematic review JOURNAL OF DERMATOLOGICAL TREATMENT
Artículo2019 Lignin and Cellulose Blends as Pharmaceutical Excipient for Tablet Manufacturing via Direct Compression BIOMOLECULES
Artículo2019 Lipid-based colloidal carriers for transdermal administration of bioactives MATERIALS FOR BIOMEDICAL ENGINEERING: ORGANIC MICRO AND NANOSTRUCTURES
Artículo2019 Poly(methyl vinyl ether-co-maleic acid) Hydrogels Containing Cyclodextrins and Tween 85 for Potential Application as Hydrophobic Drug Delivery Systems MACROMOLECULAR RESEARCH
Artículo2019 Printfills: 3D printed systems combining fused deposition modeling and injection volume filling. Application to colon-specific drug delivery EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2019 Study of the critical points in combined matrix tablets containing both inert and swelling excipients JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2019 Thermoplastic polyurethane as matrix forming excipient using direct and ultrasound-assisted compression EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo2018 Activity enhancement of selective antitumoral selenodiazoles formulated with poloxamine micelles COLLOIDS AND SURFACES B-BIOINTERFACES
Artículo2018 Approaching a new generation of fiberboards taking advantage of self lignin as green adhesive INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Artículo2018 Aqueous acetone fractionation of kraft, organosolv and soda lignins INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Artículo2018 Development of solid dispersions of beta-lapachone in PEG and PVP by solvent evaporation method DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo2018 Early stages of drug crystallization from amorphous solid dispersion via fractal analysis based on chemical imaging EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2018 Electron microscopy/energy dispersive X-ray spectroscopy of drug distribution in solid dispersions and interpretation by multifractal geometry JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
Artículo2018 Electron Paramagnetic Resonance and Small-Angle X-ray Scattering Characterization of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers for Dibucaine Encapsulation LANGMUIR
Artículo2018 Environmentally friendly lignocellulose nanofibres from barley straw CELLULOSE CHEMISTRY AND TECHNOLOGY
Revisión2018 Implantable Polymeric Drug Delivery Devices: Classification, Manufacture, Materials, and Clinical Applications POLYMERS
Artículo2018 Lignin-based hydrogels with "super-swelling" capacities for dye removal INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Artículo2018 Node and Link Allocation in Network Virtualization Based on Distributed Constraint Optimization JOURNAL OF NETWORK AND SYSTEMS MANAGEMENT
Artículo2018 Recycled fibers for fluting production: The role of lignocellulosic micro/nanofibers of banana leaves JOURNAL OF CLEANER PRODUCTION
Artículo2018 Solid Lipid Nanoparticles for Dibucaine Sustained Release PHARMACEUTICS
Artículo2018 Synthesis and Characterization of Lignin Hydrogels for Potential Applications as Drug Eluting Antimicrobial Coatings for Medical Materials ACS SUSTAINABLE CHEMISTRY & ENGINEERING
Artículo2017 A comparative study of the suitability of different cereal straws for lignocellulose nanofibers isolation INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Ponencia2017 Aplicación de casos prácticos en las aulas de la Facultad de Farmacia de Sevilla Evaluación de la Calidad de la Investigación y de la Educación Superior: Libro de resúmenes XIV FECIES
Artículo2017 Application of ultrasound-assisted compression in pharmaceutical technology. Design and optimization of oral sustained-release dosage forms JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2017 Desarrollo de lecciones sobre reactores químicos y biológicos en la plataforma Moodle Revista de innovación y buenas prácticas docentes
Revisión2017 Design space and critical points in solid dosage forms JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
Artículo2017 Development and characterization of new functionalized polyurethanes for sustained and site -specific drug release in the gastrointestinal tract EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo2017 Influence of different surfactants on the physicochemical properties of elastic liposomes PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
Artículo2017 Isolation and Characterization of Gramineae and Fabaceae Soda Lignins INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
Artículo2017 Isolation and characterization of lignins from wheat straw: Application as binder in lithium batteries INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Resumen congreso2017 Lignin-based hydrogels with super-swelling capacities ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY
Corrección2017 Non-steroidal mineralocorticoid receptor antagonism for the treatment of cardiovascular and renal disease (vol 18, pg 28, 2016) EUROPEAN JOURNAL OF HEART FAILURE
Artículo2017 Novel Polyurethane Matrix Systems Reveal a Particular Sustained Release Behavior Studied by Imaging and Computational Modeling AAPS PHARMSCITECH
Artículo2017 Rapidly growing vegetables as new sources for lignocellulose nanofibre isolation: Physicochemical, thermal and rheological characterisation CARBOHYDRATE POLYMERS
Artículo2017 The effect of pre-treatment on the production of lignocellulosic nanofibers and their application as a reinforcing agent in paper CELLULOSE
Revisión2017 The polypill: An effective approach to increasing adherence and reducing cardiovascular event risk EUROPEAN JOURNAL OF PREVENTIVE CARDIOLOGY
Artículo2017 The suitability of banana leaf residue as raw material for the production of high lignin content micro/nano fibers: From residue to value-added products INDUSTRIAL CROPS AND PRODUCTS
Revisión2016 Betrixaban - the next direct factor Xa inhibitor? EXPERT REVIEW OF HEMATOLOGY
Artículo2016 Biorefinery Process Combining Specel (R) Process and Selective Lignin Precipitation using Mineral Acids BIORESOURCES
Artículo2016 Characterisation of the Ability of Carbamazepine for Processing It through Direct Compression Applying the New Expert System SeDeM International Journal of Clinical Pharmacology & Pharmacotherapy
Artículo2016 First study of the evolution of the SeDeM expert system parameters based on percolation theory: Monitoring of their critical behavior EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2016 Isolation and characterization of lignocellulose nanofibers from different wheat straw pulps INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Artículo2016 Nanostructured lipid carriers as robust systems for topical lidocaine-prilocaine release in dentistry EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo2016 Non-steroidal mineralocorticoid receptor antagonism for the treatment of cardiovascular and renal disease EUROPEAN JOURNAL OF HEART FAILURE
Artículo2015 A new biodegradable polythiourethane as controlled release matrix polymer INTERNATIONAL JOURNAL OF PHARMACEUTICS
Capítulo2015 Critical Points and Phase Transitions in Polymeric Matrices for Controlled Drug Release HANDBOOK OF POLYMERS FOR PHARMACEUTICAL TECHNOLOGIES, VOL 1: STRUCTURE AND CHEMISTRY
Artículo2015 In vivo absorption behaviour of theophylline from starch-methyl methacrylate matrix tablets in beagle dogs INTERNATIONAL JOURNAL OF PHARMACEUTICS
Revisión2015 LCZ696: a new paradigm for the treatment of heart failure? EXPERT OPINION ON PHARMACOTHERAPY
Artículo2015 Physico-chemical and rheological characterization of olive-pomace oils EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY
Artículo2015 Physicochemical stability of a new topical timolol 0.5% gel formulation for the treatment of infant hemangioma PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
Artículo2015 Physicochemical stability of captopril and enalapril extemporaneous formulations for pediatric patients PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
Artículo2015 The influence of polymer content on early gel-layer formation in HPMC matrices: The use of CLSM visualisation to identify the percolation threshold EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2015 Towards a rational basis for selection of excipients: Excipient Efficiency for controlled release INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2014 A new deferiprone controlled release system obtained by ultrasound-assisted compression PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
Artículo2014 Brij detergents reveal new aspects of membrane microdomain in erythrocytes MOLECULAR MEMBRANE BIOLOGY
Ponencia2014 Implantación del Plan de Orientación y Acción Tutorial en la Facultad de Farmacia de la Universidad de Sevilla ARS PHARMACEUTICA
Artículo2014 In vitro release testing of matrices based on starch methyl methacrylate copolymers: Effect of tablet crushing force, dissolution medium pH and stirring rate INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2014 Reduction-sensitive functionalized copolyurethanes for biomedical applications Polymer Chemistry
Artículo2014 Synthesis and characterization of a novel chitosan-N-acetyl-homocysteine thiolactone polymer using MES buffer CARBOHYDRATE POLYMERS
Artículo2014 U300, a novel long-acting insulin formulation EXPERT OPINION ON BIOLOGICAL THERAPY
Artículo2013 ABP con plataforma virtual para los alumnos de Biofarmacia y Farmacocinética y Farmacia Galénica General EDUSFARM
Artículo2013 Critical points in ethylcellulose matrices: Influence of the polymer, drug and filler properties ACTA PHARMACEUTICA
Ponencia2013 Cytotoxicity of solid lipid nanoparticles and nanostructured lipid carriers containing the local anesthetic dibucaine designed for topical application NANOSAFE 2012: INTERNATIONAL CONFERENCES ON SAFE PRODUCTION AND USE OF NANOMATERIALS
Artículo2013 Development of a Sustained-release System for Nitric Oxide Delivery using Alginate/Chitosan Nanoparticles CURRENT NANOSCIENCE
Artículo2013 Drug diffusion from disperse systems with a hydrophobically modified polysaccharide: Enhancer (R) vs Franz cells CARBOHYDRATE POLYMERS
Ponencia2013 In vivo toxicity of enoxaparin encapsulated in mucoadhesive nanoparticles: Topical application in a wound healing model NANOSAFE 2012: INTERNATIONAL CONFERENCES ON SAFE PRODUCTION AND USE OF NANOMATERIALS
Artículo2013 Physicochemical characterization of surfactant incorporating vesicles that incorporate colloidal magnetite JOURNAL OF LIPOSOME RESEARCH
Resumen congreso2013 Spin Label and SAXS Study of Cetylpalmitate Solid Lipid Nanoparticles Loaded with Dibucaine BIOPHYSICAL JOURNAL
Revisión2013 Strategies for delivering local anesthetics to the skin: focus on liposomes, solid lipid nanoparticles, hydrogels and patches EXPERT OPINION ON DRUG DELIVERY
Resumen congreso2013 Structural Effects of Dibucaine Encapsulation into Solid Lipid Nanoparticles and Nanostructured Lipid Carriers BIOPHYSICAL JOURNAL
Artículo2013 Study of the properties of the new biodegradable polyurethane PU (TEG-HMDI) as matrix forming excipient for controlled drug delivery DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo2013 Towards elucidation of the drug release mechanism from compressed hydrophilic matrices made of cellulose ethers. III. Critical use of thermodynamic parameters of activation for modeling the water penetration and drug release processes JOURNAL OF CONTROLLED RELEASE
Artículo2013 Validation of an HPLC Method for the Determination of Dibucaine Encapsulated in Solid Lipid Nanoparticles and Nanostructured Lipid Carriers Acta farmacéutica bonaerense
Artículo2012 Collaboration between HPMC and NaCMC in order to Reach the Polymer Critical Point in Theophylline Hydrophilic Matrices SCIENTIFIC WORLD JOURNAL
Artículo2012 Compaction properties, drug release kinetics and fronts movement studies of matrices combining mixtures of swellable and inert polymers. III: Effect of polymer substitution type INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2012 Graft copolymers of ethyl methacrylate on waxy maize starch derivatives as novel excipients for matrix tablets: Drug release and fronts movement kinetics EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2012 Stakeholder Analysis The Andalusian Agency for Healthcare Quality Case HEALTH CARE MANAGER
Artículo2012 Study of the critical points and the role of the pores and viscosity in carbamazepine hydrophilic matrix tablets EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2011 Release behaviour of clozapine matrix pellets based on percolation theory INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2011 Rheological and mechanical properties of hydrophilic dispersions using a new hydrophobically modified polymer and Igepal (R) CO520 CARBOHYDRATE POLYMERS
Artículo2011 Tapioca starch graft copolymers and Dome Matrix (R) modules II. Effect of modules assemblage on Riboflavin release kinetics EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Otros2010 Acción tutorial en el EEES en la Facultad de Farmacia de la us: 4 Años de experiencia de un programa de alumnos tutores ARS PHARMACEUTICA
Artículo2010 Compaction properties, drug release kinetics and fronts movement studies from matrices combining mixtures of swellable and inert polymers. II. Effect of HPMC with different degrees of methoxy/hydroxypropyl substitution INTERNATIONAL JOURNAL OF PHARMACEUTICS
Corrección2010 Critical points in the formulation of pharmaceutical swellable controlled release dosage forms-Influence of particle size (vol 7, pg 421, 2009) PARTICUOLOGY
Revisión2010 Factors affecting drug release from hydroxypropyl methylcellulose matrix systems in the light of classical and percolation theories EXPERT OPINION ON DRUG DELIVERY
Artículo2010 Graft tapioca starch copolymers as novel excipients for controlled-release matrix tablets CARBOHYDRATE POLYMERS
Artículo2010 Polymer Percolation Threshold in HPMC Extended Release Formulation of Carbamazepine and Verapamil HCl AAPS PHARMSCITECH
Ponencia2010 Programa de Alumnos Tutores de la Facultad de Farmacia de la US (2006/07 - Actualidad): Análisis DAFO efectuado por los alumnos tutores ARS PHARMACEUTICA
Artículo2010 Study of critical points of drugs with different solubilities in hydrophilic matrices INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2010 Study of the critical points of experimental HPMC-NaCMC hydrophilic matrices INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2010 Tapioca starch graft copolymers and Dome Matrix (R) modules assembling technology. I. Effect of module shape on drug release EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2010 Towards elucidation of the drug release mechanism from compressed hydrophilic matrices made of cellulose ethers. II. Evaluation of a possible swelling-controlled drug release mechanism using dimensionless analysis JOURNAL OF CONTROLLED RELEASE
Revisión2009 Critical points in the formulation of pharmaceutical swellable controlled release dosage forms-Influence of particle size PARTICUOLOGY
Artículo2009 Estimation of the percolation thresholds in ternary lobenzarit disodium-dextran-HPMC hydrophilic matrices tablets: Effects of initial porosity EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo2009 Graft copolymers of ethyl methacrylate on waxy maize starch derivatives as novel excipients for matrix tablets: Physicochemical and technological characterisation EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2009 Pacientes esquizofrénicos y cuidadores: problemática del tratamiento ATENCION FARMACEUTICA
Artículo2009 Physicochemical and mechanical characterization of galactomannan from Mimosa scabrella: Effect of drying method CARBOHYDRATE POLYMERS
Artículo2009 Synthesis and characterization of new copolymers of ethyl methacrylate grafted on tapioca starch as novel excipients for direct compression matrix tablets EUROPEAN POLYMER JOURNAL
Artículo2008 Application of percolation theory in the study of an extended release Verapamil hydrochloride formulation INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2008 Compaction properties, drug release kinetics and fronts movement studies from matrices combining mixtures of swellable and inert polymers: Effect of HPMC of different viscosity grades INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2008 Drug release behaviour from methyl methacrylate-starch matrix tablets: Effect of polymer moisture content EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2008 Towards elucidation of the drug release mechanism from compressed hydrophilic matrices made of cellulose ethers. I. Pulse-field-gradient spin-echo NMR study of sodium salicylate diffusivity in swollen hydrogels with respect to polymer matrix physical structure JOURNAL OF CONTROLLED RELEASE
Artículo2007 Estimation of the Percolation Thresholds in Lobenzarit Disodium Native Dextran Matrix Tablets AAPS PHARMSCITECH
Artículo2007 Influence of moisture content on the mechanical properties of methyl methacrylate-starch copolymers EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2007 Investigation of the influence of particle size on the excipient percolation thresholds of HPMC hydrophilic matrix tablets JOURNAL OF PHARMACEUTICAL SCIENCES
Capítulo2007 Tablet Design Pharmaceutical Manufacturing Handbook: Production and Processes
Artículo2006 Effect of drug particle size in ultrasound compacted tablets - Continuum percolation model approach INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2006 Estimation of the percolation thresholds in acyclovir hydrophilic matrix tablets EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2006 Estudio de preformulación de Aciclovir para el desarrollo de comprimidos matriciales de HPMC Industria Farmacéutica
Revisión2006 Matrices hidrófilas: influencia del tamaño de partícula y de la solubilidad del fármaco Ciencia y tecnología pharmacéutica
Artículo2006 Study of the critical points in lobenzarit disodium hydrophilic matrices for controlled drug delivery CHEMICAL & PHARMACEUTICAL BULLETIN
Artículo2006 Study of the critical points of HPMC hydrophilic matrices for controlled drug delivery INTERNATIONAL JOURNAL OF PHARMACEUTICS
Revisión2005 Influencia de la formulación, el proceso de elaboración y las condiciones de almacenamiento sobre la liberación del fármaco Ciencia y tecnología pharmacéutica
Artículo2005 Propiedades del subcitrato de bismuto coloidal (SBC) en el tratamiento de desordenes gastrointestinales Ciencia y tecnología pharmacéutica
Artículo2005 Water sorption-desorption behaviour of methyl methacrylate-starch copolymers: effect of hydrophobic graft and drying method EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo2005 Xanthan and galactomannan (from M-scabrella) matrix tablets for oral controlled delivery of theophylline INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2004 A new wet conductivimetric method to estimate the drug percolation threshold PHARMACEUTICAL RESEARCH
Artículo2004 Aplicaciones terapéuticas presentes y futuras del subcitrato de bismuto coloidal (SBC) Ciencia y tecnología pharmacéutica
Artículo2004 Application of a new mathematical method for the estimation of the mean surface area to calculate the percolation threshold of lobenzarit dissodium salt in controlled release matrices CHEMICAL & PHARMACEUTICAL BULLETIN
Artículo2004 Comparison of different mathematical models for the tensile strength-relative density profiles of binary tablets EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo2004 Interacción sólido-agua. I. Estudio de las interacciones del agua con los sólidos farmacéuticos Ciencia y tecnología pharmacéutica
Artículo2004 Interacción sólido-agua. III. Efecto de la presencia de humedad sobre las características tecnológicas en comprimidos Ciencia y tecnología pharmacéutica
Artículo2004 Interacción sólido-agua.II. Isoterma de sorción/desorción de vapor de agua Ciencia y tecnología pharmacéutica
Ponencia2003 Comprimidos de complejo morfina-Eudragit L: influencia del porcentaje de morfina libre VI Congreso de la Asociación Española de Farmacia Industrial y Galénica (SEFIG); 3ª Jornadas de Tecnología Farmacéutica (AEFI): Granada, 9-11 de febrero 2003
Artículo2003 Drug release kinetics and fronts movement studies from methyl methacrylate (MMA) copolymer matrix tablets: effect of copolymer type and matrix porosity JOURNAL OF CONTROLLED RELEASE
Capítulo2003 Efecto de la fuerza de compresión sobre la liberación de Teofilina a partir de matrices elaboradas con Hamma VI Congreso de la Asociación Española de Farmacia Industrial y Galénica (SEFIG); 3ª Jornadas de Tecnología Farmacéutica (AEFI): Granada, 9-11 de febrero 2003
Capítulo2003 Efecto del contenido en humedad de copolímeros acrílicos sobre la liberación de teofilina anhidra VI Congreso de la Asociación Española de Farmacia Industrial y Galénica (SEFIG); 3ª Jornadas de Tecnología Farmacéutica (AEFI): Granada, 9-11 de febrero 2003
Artículo2003 Optimización de un proceso de complejación para obtener un nuevo sistema de liberación controlada de morfina. II: Influencia de la concentración de polímero en el medio de reacción y determinación del exceso de morfina Ciencia y tecnología pharmacéutica
Artículo2003 Trasplante de células naturales ¿dopaminotróficas?: nuevo concepto terapéutico antiparkinsoniano REVISTA DE NEUROLOGIA
Artículo2002 Optimisation of a complexation process as a new method for obtaining a controlled morphine delivery system STP PHARMA SCIENCES
Artículo2002 Optimización de un proceso de complejación para obtener un nuevo sistema de liberacíon controlada de morfina. I. Influencia de la fuerza iónica y de la cantidad de morfina a utilizar. Ciencia y tecnología pharmacéutica
Artículo2002 Stability study of flutamide in solid state and in aqueous solution DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo2002 Synthesis of hydroxypropyl methacrylate/polysaccharide graft copolymers as matrices for controlled release tablets DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo2002 The influence of carbohydrate nature and drying methods on the compaction properties and pore structure of new methyl methacrylate copolymers INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2001 Estimation of the percolation thresholds in dextromethorphan hydrobromide matrices EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo2000 Caracterizacion farmacocinetica de formulaciones orales de liberacion sostenida. Factores que influyen en el perfil farmacocinetico Acta farmacéutica bonaerense
Artículo2000 Fronts movement as a useful tool for hydrophilic matrix release mechanism elucidation INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo2000 Percolation thresholds in ultrasound compacted tablets JOURNAL OF CONTROLLED RELEASE
Artículo2000 Preclinical study of an oral controlled release naltrexone complex in mice JOURNAL OF PHARMACY AND PHARMACOLOGY
Artículo2000 Statistical optimization of a sustained-release matrix tablet of lobenzarit disodium DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo2000 Synthesis and characterization of some new homo- and copoly(vinylsaccharides). Some preliminary studies as drug delivery POLYMER
Artículo2000 Tecnología aplicada al estudio de los procesos internos que controlan la liberación de principios activos en comprimidos matriciales Ciencia y tecnología pharmacéutica
Artículo1999 Aplicación de la teoría de la percolación en la tecnología farmacéutica Revista Mexicana de Ciencias Farmacéuticas
Artículo1999 Aspectos farmacocinéticos y posológicos de la terapia analgésica Ciencia y tecnología pharmacéutica
Artículo1999 Design of controlled release inert matrices of naltrexone hydrochloride based on percolation concepts INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1999 Determination of the glass transition temperatures of some new methyl methacrylate copolymers using Modulated Temperature Differential Scanning Calorimetry (MTDSC) PHARMACEUTICAL RESEARCH
Artículo1999 Evaluation of Eudragit (R) RS-PO and Ethocel (R) 100 matrices for the controlled release of lobenzarit disodium DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1999 Principales estrategias para estimar los parámetros de percolación Industria Farmacéutica
Artículo1999 Synthetic PMMA-grafted polysaccharides as hydrophilic matrix for controlled-release forms DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1998 Aplicaciones clínicas de los modelos alométricos Industria Farmacéutica
Artículo1998 Effect of Explotab (R) on the tabletability of a poorly soluble drug DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1998 Glass transitions of some methylmethacrylate copolymers JOURNAL OF PHARMACY AND PHARMACOLOGY
Artículo1998 Influence of two different types of excipient on drug percolation threshold INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1998 Study of morphine hydrochloride percolation threshold in Eudragit (R) RS-PM matrices INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1998 The role of the drug/excipient particle size ratio in the percolation model for tablets PHARMACEUTICAL RESEARCH
Artículo1998 Validation study of the conductometrical analysis. Application to the drug release studies from controlled release systems JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
Artículo1997 Application of percolation theory to characterize the release behavior of carteolol matrix systems DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1997 Design and evaluation of a new central core matrix tablet INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1997 Disintegrating efficiency of croscarmellose sodium in a direct compression formulation INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1997 Drug release from a new family of graft copolymers of methyl methacrylate .1. INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1997 Estudio preliminar para la valoración de un compuesto antagonista opiáceo de liberación controlada Industria Farmacéutica
Artículo1997 Excipientes de comprimidos: Disgregantes. II. Efecto del proceso de elaboratión y de los distintos excipientes en la disgregación de comprimidos Ciencia pharmacéutica
Artículo1997 Influence of the disintegrant on the drug percolation threshold in tablets DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1997 Influence of the pH value of the dissolution medium on the release profiles of a morphine polymeric complex DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1997 Influencia del método de elaboración en las características de comprimidos de liberación controlada de lobenzarit disódico. Aportación de la teoría de la percolación Ciencia pharmacéutica
Artículo1997 Kinetic study of thiomersal degradation products PHARMAZIE
Artículo1997 Lubrificantes en la elaboración de comprimidos (III). Caracterización de los lubrificantes. Efecto de las propiedades de los excipientes Industria Farmacéutica
Artículo1997 Study of a complexation process between naltrexone and Eudragit(R) L as an oral controlled release system INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1997 Utilización de los almidones en la industria farmacéutica (y III). Su papel en liberación controlada Industria Farmacéutica
Artículo1997 Utilización de los almidones en la industria farmacéutica. (II). Su papel como disgregante y aglutinante Industria Farmacéutica
Artículo1996 Aplicación de la geometría fractal al campo farmaceútico (y II) Industria Farmacéutica
Artículo1996 Aplicación de la teoría de la percolación en el campo farmacéutico Industria Farmacéutica
Artículo1996 Bombas de liberación controlada para la administración de medicamentos Industria Farmacéutica
Artículo1996 Bombas de liberación controlada para la administración de medicamentos: (y II) administración de insulina para el tratamiento de la diabetes insulino dependiente Industria Farmacéutica
Artículo1996 Effect of drug particle size on the release behaviour of NaCl-matrix systems EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
Artículo1996 Excipientes de comprimidos: Disgregantes. I. Mecanismos de acción Ciencia pharmacéutica
Artículo1996 Preclinical study of a controlled release oral morphine system in rats INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1996 Relationship between drug percolation threshold and particle size in matrix tablets PHARMACEUTICAL RESEARCH
Artículo1996 Study of percolation thresholds in ternary tablets INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1996 Utilización de los almidones en la industria farmacéutica: (I) su papel como diluyente Industria Farmacéutica
Artículo1996 Zero-order release periods in inert matrices. Influence of the distance to the percolation threshold Pharmaceutica Acta Helvetiae
Artículo1995 Aplicación de la geometría fractal al campo farmacéutico (I) Industria Farmacéutica
Artículo1995 Compatibility study between carteolol hydrochloride and tablet excipients using differential scanning calorimetry and hot stage microscopy PHARMAZIE
Artículo1995 Influence of diluents and manufacturing method on the in-vitro dissolution of carteolol hydrochloride matrix tablets INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1995 Introducción a la teoría de la percolación, (I). Antecedentes y concepto Industria Farmacéutica
Artículo1995 Introducción a la teoría de la percolación, (y II). Modelos de percolación Industria Farmacéutica
Artículo1995 Physical characterization of carteolol - eudragit(r) l-binding interaction INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1995 Simultaneous HPLC determination of some drugs commonly used in cold medications - dextromethorphan, diphenhydramine, phenylephrine, phenylpropanolamine and pseudoephedrine DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1994 A rapid HPLC method far the quantification of tyrothricin, menthol, and benzocaine in pharmaceutical formulations JOURNAL OF PHARMACEUTICAL SCIENCES
Artículo1994 Characterization of morphine polymeric coprecipitates. A biopharmaceutical study PHARMAZIE
Artículo1994 Morphine polymeric coprecipitates for controlled-release - elaboration and characterization DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1994 Problemática actual del tiomersal en soluciones para lentes de contacto Industria Farmacéutica
Artículo1994 Study of the release mechanism of carteolol inert matrix tablets on the basis of percolation theory INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1993 Formulation factors affecting thimerosal stability DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Artículo1993 Percolation theory - application to the study of the release behavior from inert matrix systems INTERNATIONAL JOURNAL OF PHARMACEUTICS
Artículo1993 Study of thimerosal degradation mechanism INTERNATIONAL JOURNAL OF PHARMACEUTICS

Proyectos de Investigación

Fecha de inicio Fecha de fin Denominación Agencia financiadora Importe concedido
01/01/2022 31/05/2023 Aplicación de tecnologías innovadoras de impresión 3D para elaborar sistemas personalizados de liberación de fármacos para el tratamiento de enfermedades del tracto gastro-intestinal (US-1380923) Consejería de Economía, Conocimiento, Empresas y Universidad (Autonómico) 55.829,00 €
01/01/2019 30/09/2022 Sistemas de Liberación de Fármacos Basados en Materiales Poliméricos Avanzados para el Tratamiento de Enfermedades del Tracto Gastro-Intestinal (RTI2018-095041-B-C31) Ministerio de Ciencia, Innovación y Universidades (Nacional) 96.800,00 €
30/12/2016 29/06/2019 Polímeros de Fuentes Renovables para Aplicaciones Farmacéuticas: Homopolímeros y Copolímeros Basados en Azúcares (MAT2016-77345-C3-2-P) Ministerio de Economía y Competitividad (Nacional) 96.800,00 €
30/12/2016 29/06/2019 Polímeros de Fuentes Renovables para Aplicaciones Farmacéuticas. Diseño de Sistemas Avanzados para Liberación Prolongada y Localizada de Fármacos (MAT2016-77345-C3-3-P) Ministerio de Economía y Competitividad (Nacional) 108.900,00 €
30/01/2014 16/07/2019 Polímeros Biodegradables a partir de Fuentes Renovables como Sistemas para el Transporte y Liberación de Fármacos y Material Genético (P12-FQM-1553) Consejería de Economía, Innovación y Ciencia (Autonómico) 273.894,00 €
01/01/2014 31/03/2017 Nuevas tecnologías en el desarrollo de alimentos y medicamentos basados en derivados del olivo, para el tratamiento de enfermedades crónicas inflamatorias (Acrónimo Oleomega) (RTC-2014-1689-1) Ministerio de Economía y Competitividad (Nacional) 88.021,00 €
26/03/2013 25/03/2016 Aplicación de Sensores de Rango a la Navegación y Coordinación de Múltiples Vehículos Aéreos no Tripulados (Rancom) (P11-TIC-7066) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico) 87.393,39 €
01/01/2013 31/12/2015 Bioplásticos Derivados de Carbohidratos y Biopolímeros Microbianos para Aplicación en Envasado y Farmacia. III (MAT2012-38044-C03-02) Ministerio de Economía y Competitividad (Nacional) 64.350,00 €
03/02/2010 31/12/2014 Nanosistemas como Transportadores de Cannbinoides para el Tratamiento del Dolor Neuropático (P09-CTS-5029) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico) 279.024,00 €
31/01/2008 31/12/2012 Polímeros Sintéticos Biodegradables para Aplicaciones en Biomedicina y Farmacia (P07-FQM-02684) Junta de Andalucía - Consejería de Innovación, Ciencia y Empresas (Autonómico) 141.725,00 €
28/12/2004 30/12/2007 Nuevos sistemas de liberación controlada de deferiprona obtenidos por compresión asistida por ultrasonidos (PI042604) Ministerio de Sanidad y Consumo (Instituto de Salud Carlos III) (Nacional) 15.180,00 €
13/12/2004 13/12/2007 Caracterización tecnológica y aplicaciones de nuevos copolímeros de injerto carbohidrato/acrílico para la liberación controlada de medicamentos (MAT2004-01599) Ministerio de Ciencia y Tecnología (Nacional) 71.640,00 €
01/01/2004 31/12/2004 Aplicación de nuevos polímeros e el diseño de formas farmacéuticas de liberación modificada (FIT-090100-2004-41) Ministerio de Educación y Ciencia (Nacional) 70.000,00 €
28/12/2001 27/12/2004 Caracterización tecnológica y biofarmacéutica de nuevos copolimeros de injerto carbohidrato/acrílico para la liberación controlada de medicamentos (MAT2001-3874-C02-01) Ministerio de Ciencia y Tecnología (Nacional) 56.260,71 €
01/10/1998 30/09/2001 SÍNTESIS Y CARACTERIZACIÓN FÍSICO-QUÍMICA Y TECNOLÓGICA DE NUEVOS POLÍMEROS CARBOHIDRATADOS PARA LA LIBERACIÓN CONTROLADA DE MEDICAMENTOS (MAT98-0488) 75.727,51 €

Contratos

Fecha de inicio Fecha de fin Denominación Agencia financiadora Importe concedido
09/05/2024 08/05/2025 Estudio de formulaciones industriales de medicamentos y requisitos normativos (5135/0018) Cronofarma, S.L. (Desconocido)
05/07/2023 04/12/2023 Estudio del comportamiento de formulaciones industriales de comprimidos elaborados con excipientes derivados de celulosa (4875/0018) Cronofarma, S.L. (Desconocido)
07/10/2019 06/12/2019 Estudio de formulaciones tópicas de antiinflamatorios no esteroideos (3698/0018) Biosinter Pharma, S.L. (Desconocido)
20/02/2019 19/05/2019 Desarrollo de una formulación de liberación prolongada (3542/0975) Cronofarma, S.L. (Desconocido)
21/03/2013 20/03/2016 Diseño y estabilidad de formulaciones magistrales pediátricas. (1931/0310) Instituto Tecnológico del Medicamento Individualizado, S.L. (Desconocido)
01/01/2010 31/12/2012 Diseño y estabilidad de formulaciones magistrales pediátricas (0602/0310) Instituto Tecnológico del Medicamento Individualizado, S.L. (Desconocido)
14/06/2008 14/06/2009 Estudio de los puntos críticos en matrices inertes (OG-030/08) Colorcon. Global Technical Services (Desconocido)
29/10/2007 14/05/2008 Preparation of the technical data for ultrasound compaction (0021/0018) I.M.A. Industria Macchine Automatiche, S.P.A. (Desconocido)
04/08/2006 30/09/2007 Investigación científica (OG-092/06) Laboratorios Cinfa S.A. (Desconocido)
05/04/2006 05/04/2007 Estudios de los puntos críticos del excipiente y del papel de los poros en matrices de HPMC (OG-071/06) Colorcon. Global Technical Services (Desconocido)
24/03/2006 24/04/2006 Caracterización de muestras de óxido de zinc (OG-078/06) Mario Pilato Blat, S.A. (Desconocido)
22/12/2004 22/12/2009 Estudio de estabilidad del óxido de cinc a 6 meses y a 5 años (OG-010/05) Mario Pilato Blat, S.A. (Desconocido)
22/12/2004 22/12/2005 Caracterización de muestras de óxidos de zinc (OG-014/05) Mario Pilato Blat, S.A. (Desconocido)
15/12/2004 15/12/2005 Estudio del transporte de agua y fármaco en el interior de matrices hidrófilas de liberación controlada (OG-009/05) Colorcon. Global Technical Services (Desconocido)
01/10/2003 01/10/2004 Caracterización de las W330 por adsorción de nitrógeno (OG-099/04) Almirall Prodesfarma, S.A. (Desconocido)
26/05/2003 26/06/2003 Estudio para la determinación de la cantidad de flutamida remanente contenida en pellets previamente implantados y comparación con la flutamida contenida en pellets no implantados (OG-061/03) University Of California (Department of Physiological Science) (Desconocido)
18/01/2000 18/03/2000 Estudio de preformulación de metamizol para el desarrollo de sistemas orales de liberación controlada (OG-008/00) Boehringer Ingelheim España, S.A. (Barcelona) (Desconocido)

Ayudas

Fecha de inicio Fecha de fin Denominación Agencia financiadora Importe concedido
01/01/2020 31/12/2020 Ayudas para el uso de los Servicios Generales de Investigación (PPI559/2020) Universidad de Sevilla (Local) 796,00 €
16/03/2009 16/06/2009 Nanosistemas como transportadores de cannabinoides para el tratamiento del dolor neuropático (OTRI/08-FCIE44) Universidad de Sevilla (Oficina de Transferencia de Resultados de Investigación) (Local) 3.000,00 €
15/10/2007 15/02/2008 Desarrollo de un genérico de Diltiazen Retard comprimidos (OTRI/06-CT22) Universidad de Sevilla(Oficina de Transferencia de Resultados de Investigación) (Local) 2.200,00 €
06/03/2006 06/08/2006 Desarrollo de nuevos medicamentos genéricos de interés para los laboratorios farmacéuticos (OTRI/05-PC03) Universidad de Sevilla(Oficina de Transferencia de Resultados de Investigación) (Local) 1.600,00 €
01/01/2003 30/12/2004 Desarrollo de un sistema para la liberación colónica de fármacos administrados por vía oral (HP2002-0073) Ministerio de Ciencia y Tecnología (Nacional) 7.500,00 €