| Artículo | 2025 |
Magnetron sputtered ß-Ti coatings for biomedical application: A HiPIMS approach to improve corrosion resistance and mechanical behavior
|
APPLIED SURFACE SCIENCE |
| Artículo | 2024 |
2D magnesium phosphate resorbable coating to enhance cell adhesion on titanium surfaces
|
MATERIALS CHEMISTRY AND PHYSICS |
| Capítulo | 2024 |
3D Printed Porous Ceramic Implants Infiltrated with Biodegradable Biopolymer Composites for Improved Mechanical and Biofunctional Behaviour
|
Springer Proceedings in Materials |
| Revisión | 2024 |
A new multi-criteria decision-making approach for the design and selection of materials and manufacturing processes of toys for children with autism
|
Materials Today Communications |
| Artículo | 2024 |
A novel poly(Rhodamine B) coated polylactic acid doped carbon black electrode for nitrite detection in drinking water
|
Journal of Food Measurement and Characterization |
| Artículo | 2024 |
A novel poly(Rhodamine B) coated polylactic acid doped carbon black electrode for nitrite detection in drinking water
|
Journal of Food Measurement and Characterization |
| Artículo | 2024 |
Alloy exsolution in co-doped PrBaMn2-xTMxO5+δ (TM = Co and/or Ni) obtained by mechanochemistry
|
JOURNAL OF POWER SOURCES |
| Ponencia | 2024 |
Approaching to the difficulties of science divulgation events: a survey on the researcher perspective
|
INTED Proceedings |
| Ponencia | 2024 |
Approaching to the impact of science divulgation events: a survey on the social perspective of science
|
INTED Proceedings |
| Artículo | 2024 |
Bifunctional praseodymium-doped SnS2 thin films for photocatalytic and antibacterial applications
|
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS |
| Artículo | 2024 |
Biomechanical behavior of a new design of dental implant: Influence of the porosity and location in the maxilla
|
Journal of Materials Research and Technology |
| Capítulo | 2024 |
Design and Characterization of Porous Titanium Scaffolds: An Alternative for Dental Implant
|
Springer Proceedings in Materials |
| Artículo | 2024 |
Design and manufacturing by fused filament technique of novel YSZ porous grafts infiltrated with PCL/PVA/AgNPs for large bone defects repairing
|
Journal of Materials Research and Technology |
| Artículo | 2024 |
Effect of surface pretreatment on the polypyrrole coating of acrylonitrile butadiene styrene. Part A: Synthesis and characterization
|
Progress in Organic Coatings |
| Artículo | 2024 |
Electrical impedance characterization and modelling of Ti-Β implants
|
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A |
| Capítulo | 2024 |
Electrical Impedance: An Effective Technique to Detect Volumetric and Surface Microstructural Variations in Materials
|
Springer Proceedings in Materials |
| Artículo | 2024 |
Electrophoretic deposition of TiO2 nanotubes and antibiotics on polyurethane coated stainless steel for improved antibacterial response and cell viability
|
Materials Today Communications |
| Artículo | 2024 |
Electrosynthesis and characterization of poly(rhodamine B) coatings on 3d printed polylactic acid doped carbon black (PLA-CB) electrodes for promising sensor applications
|
JOURNAL OF SOLID STATE ELECTROCHEMISTRY |
| Artículo | 2024 |
Enhancing alginate dialdehyde-gelatin (ADA-GEL) based hydrogels for biofabrication by addition of phytotherapeutics and mesoporous bioactive glass nanoparticles (MBGNs)
|
JOURNAL OF BIOMATERIALS APPLICATIONS |
| Capítulo | 2024 |
Essential Properties in Toys for Children with Autism: Analysis of Materials and Manufacturing Processes
|
Springer Proceedings in Materials |
| Artículo | 2024 |
Estimation of the trajectory and attitude of railway vehicles using inertial sensors with application to track geometry measurement
|
Vehicle System Dynamics |
| Capítulo | 2024 |
Evaluando el aprendizaje con cuestionarios técnicos previos en la enseñanza teórica en ingeniería
|
Enseñanza e innovación educativa en el ámbito universitario |
| Artículo | 2024 |
Evaluating the mechanical integrity and reliability of multi-channelled flat-sheet ceramic membranes for filtration applications
|
CERAMICS INTERNATIONAL |
| Artículo | 2024 |
Experimental investigation of direct saline water application for effective biorefinery from newly isolated freshwater microalgae
|
Biomass Conversion and Biorefinery |
| Artículo | 2024 |
Findings and perspectives of β-Ti alloys with biomedical applications: Exploring beyond biomechanical and biofunctional behaviour
|
Journal of Materials Research and Technology |
| Artículo | 2024 |
Gallium-containing mesoporous nanoparticles influence in-vitro osteogenic and osteoclastic activity
|
Biomaterials Advances |
| Artículo | 2024 |
Influence of Materials of Moulds and Geometry of Specimens on Mechanical Properties of Grouts Based on Ultrafine Hydraulic Binder
|
MATERIALS |
| Artículo | 2024 |
Influence on the properties of TMCs of ceramic and intermetallic composite reinforcements (B4C, TixAly and TixSiy) fabricated by inductive hot pressing
|
HELIYON |
| Artículo | 2024 |
Integration of space-holder technique and spark plasma sintering: An innovative approach for crafting radially graded porosity implants
|
Journal of Manufacturing Processes |
| Artículo | 2024 |
Investigation of catalytic activation of peroxydisulfate on cu-doped mesoporous silica-based particles (Cu-BMS) for efficient degradation of methylene blue
|
CATALYSIS COMMUNICATIONS |
| Artículo | 2024 |
Manufacturing via Plasma Metal Deposition of Hastelloy C-22 Specimens Made from Particles with Different Granulometries
|
MACHINES |
| Ponencia | 2024 |
Multidisciplinary Approach to Understand the Role of Nanoparticles
|
NanoSpain2024 |
| Artículo | 2024 |
Novel B4C supports for ceramic membrane filtration
|
CERAMICS INTERNATIONAL |
| Artículo | 2024 |
Novel Chemical Treatment of Porous Titanium Structures for Nanotextured Surface and Bioactive Behavior
|
ADVANCED ENGINEERING MATERIALS |
| Capítulo | 2024 |
Occupational Risk Management for Individuals with Autism Spectrum Disorder: Current Status and Perspectives
|
Springer Proceedings in Materials |
| Artículo | 2024 |
Poly(methylene blue) Modified PLA-CB Conductive 3D Printer Filament as a Promising Platform for Electrochemical Sensing of Uric Acid
|
JOURNAL OF POLYMERS AND THE ENVIRONMENT |
| Artículo | 2024 |
Predicting Rail Corrugation Based on Convolutional Neural Networks Using Vehicle’s Acceleration Measurements
|
SENSORS |
| Artículo | 2024 |
PVA-gelatine based hydrogel loaded with astaxanthin and mesoporous bioactive glass nanoparticles for wound healing
|
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY |
| Artículo | 2024 |
Separation of milk fat using silicon carbide support ceramic membranes with different pore sizes
|
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES |
| Artículo | 2024 |
Smart Design of ZnFe and ZnFe@Fe Nanoparticles for MRI-Tracked Magnetic Hyperthermia Therapy: Challenging Classical Theories of Nanoparticles Growth and Nanomagnetism.
|
Advanced healthcare materials |
| Artículo | 2024 |
Sol-gel derived B2O3-CaO borate bioactive glasses with hemostatic, antibacterial and pro-angiogenic activities
|
Regenerative biomaterials |
| Artículo | 2024 |
Sol-gel-derived calcium silicate cement incorporating collagen and mesoporous bioglass nanoparticles for dental pulp therapy
|
Dental Materials |
| Artículo | 2024 |
Structural and physical-chemical properties of milk fat globules fractionated by a series of silicon carbide membranes
|
FOOD RESEARCH INTERNATIONAL |
| Capítulo | 2024 |
Study on the Efficiency of Hydrochloric Acid Recovery from Industrial Effluents by Distillation
|
Springer Proceedings in Materials |
| Capítulo | 2024 |
Surface Modification of Titanium Dental Implant by Hydrofluoric Acid and an Organic Inhibitor Etching
|
Springer Proceedings in Materials |
| Artículo | 2024 |
Unlocking the potential of iron-containing mesoporous bioactive glasses: Orchestrating osteogenic differentiation in bone marrow mesenchymal stem cells and osteoblasts
|
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS |
| Artículo | 2023 |
Applications and multidisciplinary perspective on 3D printing techniques: Recent developments and future trends
|
Materials Science and Engineering: R: Reports |
| Artículo | 2023 |
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications
|
POLYMERS |
| Artículo | 2023 |
Cerium doped dendritic mesoporous bioactive glass nanoparticles with bioactivity and drug delivery capability
|
JOURNAL OF NON-CRYSTALLINE SOLIDS |
| Libro | 2023 |
Ciencia en la Universidad, de docentes a estudiantes
|
Ciencia en la Universidad, de docentes a estudiantes |
| Capítulo | 2023 |
Conjugando la innovación para la mejora
|
Mejorando la enseñanza a través de la innovación educativa |
| Artículo | 2023 |
Developing a bioactive glass coated dental floss: antibacterial and mechanical evaluations
|
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE |
| Artículo | 2023 |
Different electrochemical techniques for the electrosynthesis of poly methylene blue in sodium saccharin aqueous medium
|
JOURNAL OF SOLID STATE ELECTROCHEMISTRY |
| Artículo | 2023 |
Effect of different ashes from biomass olive pomace on the mechanical and fire properties of gypsum-based materials
|
Revista de la Construcción |
| Artículo | 2023 |
Effect of HVOF processing parameters on Cr3C2-NiCr hard coatings deposited on AISI 4140 steel
|
Engineering Science and Technology, an International Journal |
| Artículo | 2023 |
Effect of pH Hydrolysis on the Recovery of Antimony from Spent Electrolytes from Copper Production
|
MATERIALS |
| Artículo | 2023 |
Electropolymerized polypyrrole silver nanocomposite coatings on porous Ti substrates with enhanced corrosion and antibacterial behavior for biomedical applications
|
Materials Today Chemistry |
| Artículo | 2023 |
Extraction of antimony from a hydrochloric acid side stream of copper electro-refining by hydrolysis
|
HYDROMETALLURGY |
| Revisión | 2023 |
From ultra to nanofiltration: A review on the fabrication of ZrO2 membranes
|
CERAMICS INTERNATIONAL |
| Artículo | 2023 |
Gentle milk fat separation using silicon carbide ceramic membranes
|
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES |
| Artículo | 2023 |
Growth of hydroxyapatite plate-like nanoparticles by additive free precipitation for the deposition of aligned coatings
|
CERAMICS INTERNATIONAL |
| Artículo | 2023 |
Limits of powder metallurgy to fabricate porous Ti35Nb7Zr5Ta samples for cortical bone replacements
|
Journal of Materials Research and Technology |
| Ponencia | 2023 |
Manufacturing Of Hastelloy C-22 Specimens Via Plasma Metal Deposition To Determine The Influence Of The Processing Parameters On The Final Properties
|
Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 |
| Artículo | 2023 |
Mussel-inspired polydopamine composite mesoporous bioactive glass nanoparticles: an exploration of potential metal-ion loading platform and in vitro bioactivity.
|
ACS APPLIED MATERIALS & INTERFACES |
| Artículo | 2023 |
Nanotextured porous titanium scaffolds by argon ion irradiation: Toward conformal nanopatterning and improved implant osseointegration.
|
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A |
| Artículo | 2023 |
Olivine-Type MgMn0.5Zn0.5SiO4 Cathode for Mg-Batteries: Experimental Studies and First Principles Calculations
|
SMALL |
| Artículo | 2023 |
Photocatalytic Valorization of Plastic Waste over Zinc Oxide Encapsulated in a Metal–Organic Framework
|
ADVANCED FUNCTIONAL MATERIALS |
| Artículo | 2023 |
Porous beta titanium alloy coated with a therapeutic biopolymeric composite to improve tribomechanical and biofunctional balance
|
MATERIALS CHEMISTRY AND PHYSICS |
| Artículo | 2023 |
Porous copper oxide thin film electrodes for non-enzymatic glucose detection
|
Chemosensors |
| Artículo | 2023 |
Quaternary and pentanar mesoporous bioactive glass nanoparticles as novel nanocarriers for gallic acid: Characterisation, drug release and antibacterial activity
|
CERAMICS INTERNATIONAL |
| Artículo | 2023 |
Real-Time Measurement of Track Irregularities Using an Instrumented Axle and Kalman Filtering Techniques
|
JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS |
| Ponencia | 2023 |
Recovery of Antimony by Hydrolysis in Side Streams from Copper Production
|
Proceedings - European Metallurgical Conference, EMC 2023 |
| Artículo | 2023 |
The Incorporation of Ladle Furnace Slag in Fire Insulating Gypsum-Based Materials
|
Fire |
| Ponencia | 2023 |
The influence of lockdown in teaching a chemistry laboratory from the students' perspective
|
EDULEARN23: 15th International Conference on Education and New Learning Technologies |
| Ponencia | 2023 |
The influence of lockdown in teaching a chemistry laboratory from the teacher's perspective
|
EDULEARN23: 15th International Conference on Education and New Learning Technologies |
| Resumen congreso | 2023 |
The mitochondria-targeted antioxidant AntiOxCIN4 attenuates brain and skeletal muscle oxidative/nitrosative stress in the amyotrophic lateral sclerosis SOD1G93A mouse
|
EUROPEAN JOURNAL OF CLINICAL INVESTIGATION |
| Resumen congreso | 2023 |
The mitochondria-targeted antioxidant AntiOxCIN4 protects against cardiac oxidative/nitrosative stress in the amyotrophic lateral sclerosis SOD1G93A mouse
|
EUROPEAN JOURNAL OF CLINICAL INVESTIGATION |
| Artículo | 2023 |
Thermal and tribo-mechanical properties of high-performance poly(etheretherketone)/reduced graphene oxide nanocomposite coatings prepared by electrophoretic deposition
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 2023 |
Ti6Al4V coatings on titanium samples by sputtering techniques: microstructural and mechanical characterization
|
JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2023 |
Transparent LiOH-doped magnesium aluminate spinel produced by spark plasma sintering: effects of heating rate and dopant concentration
|
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
| Artículo | 2023 |
Understanding the synergetic effects of mechanical milling and hot pressing on bimodal microstructure and tribo-mechanical behavior in porous Ti structures
|
Journal of Materials Research and Technology |
| Artículo | 2023 |
Versatile Biodegradable Poly(acrylic acid)-Based Hydrogels Infiltrated in Porous Titanium Implants to Improve the Biofunctional Performance.
|
BIOMACROMOLECULES |
| Artículo | 2022 |
A Cubic Mg2MnO4 Cathode for non-aqueous Magnesium Batteries
|
Energy Storage Materials |
| Artículo | 2022 |
A multidisciplinary perspective on the latest trends in artificial cartilage fabrication to mimic real tissue
|
APPLIED MATERIALS TODAY |
| Artículo | 2022 |
Analysis of conventional and nonconventional forensic specimens in drug-facilitated sexual assault by liquid chromatography and tandem mass spectrometry
|
TALANTA |
| Artículo | 2022 |
Antimicrobial and Antibiofilm Effect of 4,4′-Dihydroxy-azobenzene against Clinically Resistant Staphylococci
|
Antibiotics |
| Artículo | 2022 |
Approach to the fatigue and cellular behavior of superficially modified porous titanium dental implants.
|
MATERIALS |
| Resumen congreso | 2022 |
Aproximación al comportamiento a fatiga y celular de implantes dentales de titanio poroso superficialmente modificados
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Assessing the biofortification of wheat plants by combining a Plant Growth-Promoting Rhizobacterium (PGPR) and polymeric fe-nanoparticles: allies or enemies?
|
Agronomy |
| Artículo | 2022 |
Bioactive bilayer glass coating on porous titanium substrates with enhanced biofunctional and tribomechanical behavior
|
COATINGS |
| Artículo | 2022 |
Biomechanical behavior of customized scaffolds: A three-dimensional finite element analysis
|
MATERIALS & DESIGN |
| Artículo | 2022 |
Comparative study of the behaviour of several reinforcement materials in titanium matrix produced by Rapid Sinter Pressing Manufacturing
|
Revista de metalurgia |
| Artículo | 2022 |
Competitive Oxygen Reduction Pathways to Superoxide and Peroxide during Sodium-Oxygen Battery Discharge
|
Batteries and Supercaps |
| Resumen congreso | 2022 |
Composites antibacterianos para aplicación en profilaxis de implantes dentales porosos
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Development of porous silver nanoparticle/polycaprolactone/polyvinyl alcohol coatings for prophylaxis in titanium interconnected samples for dental implants
|
Colloid and Interface Science Communications |
| Capítulo | 2022 |
Diseño del Ciclo de Mejora en el Aula (CIMA) en Ingeniería de la Prevención de Riesgos Laborales
|
Ciclos de mejora en el aula. Año 2021: experiencias de innovación docente de la Universidad de Sevilla |
| Resumen congreso | 2022 |
Diseño, Fabricación y caracterización de un nuevo implante dental con gradiente de porosidad y modificación superficial personalizada
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Double-headed amphiphile-based sponge droplets: synthesis, characterization and potential for the extraction of compounds over a wide polarity range
|
TALANTA |
| Artículo | 2022 |
Effect of boron-doped mesoporous bioactive glass nanoparticles on C2C12 cell viability and differentiation: potential for muscle tissue application.
|
ACS Biomaterials Science and Engineering |
| Artículo | 2022 |
Effect of the processing parameters on the porosity and mechanical behavior of titanium samples with bimodal microstructure produced via hot pressing
|
MATERIALS |
| Artículo | 2022 |
Electrical impedance of surface modified porous titanium implants with femtosecond laser
|
MATERIALS |
| Artículo | 2022 |
Electrochemical synthesis and characterization of Poly(Rhodamine B) coating on FTO
|
JOURNAL OF THE ELECTROCHEMICAL SOCIETY |
| Artículo | 2022 |
Experimental measurement of track irregularities using a scaled track recording vehicle and Kalman filtering techniques
|
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
| Artículo | 2022 |
Exploring hybrid Mg2+/H+ reactions of C@MgMnSiO4 with boosted voltage in magnesium-ion batteries
|
ELECTROCHIMICA ACTA |
| Resumen congreso | 2022 |
Fabricación y caracterización de piezas de Ti35Nb7Zr5Ta porosas para sustituciones óseas: límites de la PM convencional vs la técnica de espaciadores
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Fabrication and characterization of bioactive gelatin-alginate-bioactive glass composite coatings on porous titanium substrates.
|
ACS APPLIED MATERIALS & INTERFACES |
| Artículo | 2022 |
Influence of copper-strontium co-doping on bioactivity, cytotoxicity and antibacterial activity of mesoporous bioactive glass.
|
Gels (Basel, Switzerland) |
| Artículo | 2022 |
Influence of femtosecond laser modification on biomechanical and biofunctional behavior of porous titanium substrates
|
MATERIALS |
| Artículo | 2022 |
Influence of processing conditions on the mechanical properties of 17-4PH specimens produced by additive manufacturing
|
MACHINES |
| Póster | 2022 |
Influencia de la modificación con láser de femtosegundo en el comportamiento biomecánico y biofuncional de sustratos de titanio porosos
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Insights into the Reaction Mechanisms of Nongraphitic High-Surface Porous Carbons for Application in Na- and Mg-Ion Batteries
|
ACS APPLIED MATERIALS & INTERFACES |
| Artículo | 2022 |
Iron-gold nanoflowers: a promising tool for multimodal imaging and hyperthermia therapy.
|
PHARMACEUTICS |
| Artículo | 2022 |
Marine shrimp/tin waste as a negative electrode for rechargeable sodium-ion batteries
|
JOURNAL OF CLEANER PRODUCTION |
| Póster | 2022 |
Micropartículas biopoliméricas sinterizadas e infiltradas en titanio poroso como estrategia bio-activa y para la liberación controlada de fármacos
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Morphological analysis of porosity and sound absorption in sustainable materials from rice husk
|
Building acoustics |
| Artículo | 2022 |
Novel utilization of therapeutic coatings based on infiltrated encapsulated rose bengal microspheres in porous titanium for implant applications
|
PHARMACEUTICS |
| Artículo | 2022 |
Pd supported on defective TiO2 polymorphic mixtures: effect of metal-support interactions upon glycerol selective oxidation
|
Results in Engineering |
| Capítulo | 2022 |
Plasma Metal Deposition for Metallic Materials
|
Advanced Additive Manufacturing |
| Resumen congreso | 2022 |
Recubrimientos basados en hidrogeles biodegradables derivados de ácido poliacrílico con propiedades antibacterianas para implantes porosos
|
XVI Congreso Nacional de Materiales : Libro de actas |
| Artículo | 2022 |
Relation between chemical composition, morphology, and microstructure of poly(ether ether ketone)/reduced graphene oxide nanocomposite coatings obtained by electrophoretic deposition
|
JOURNAL OF MATERIALS SCIENCE |
| Libro | 2022 |
Sinergias en la investigación en STEM
|
Sinergias en la investigación en STEM |
| Editorial | 2022 |
Surface modification, functionalization and characterization of metallic biomaterials
|
METALS |
| Artículo | 2021 |
A novel, simple and highly efficient route to obtain PrBaMn2O5+δ double perovskite: mechanochemical synthesis
|
NANOMATERIALS |
| Artículo | 2021 |
A track geometry measuring system based on multibody kinematics, inertial sensors and computer vision
|
SENSORS |
| Artículo | 2021 |
Anti-inflammatory and antibacterial activities of cerium-containing mesoporous bioactive glass nanoparticles for drug-free biomedical applications
|
MATERIALS TODAY BIO |
| Artículo | 2021 |
Biocompatibility and cellular behavior of tinbta alloy with adapted rigidity for the replacement of bone tissue
|
METALS |
| Artículo | 2021 |
Biofunctionalization of porous Ti substrates coated with Ag nanoparticles for potential antibacterial behavior
|
METALS |
| Artículo | 2021 |
Caracterización del comportamiento mecánico durante la fase de estricción de los aceros corrugados Tempcore 500C: experimentación y simulación
|
Revista de metalurgia |
| Capítulo | 2021 |
Ciclo de mejora en Ingeniería de la Prevención de Riesgos Laborales
|
Ciclos de mejora en el aula. Año 2020 Experiencias de innovación docente de la Universidad de Sevilla |
| Artículo | 2021 |
Combination of selective etching and impregnation toward hollow mesoporous bioactive glass nanoparticles
|
NANOMATERIALS |
| Artículo | 2021 |
Deposition of bioactive gelatin coatings on porous titanium: influence of processing parameters, size and pore morphology
|
SURFACE & COATINGS TECHNOLOGY |
| Capítulo | 2021 |
Desarrollo y estudio de piezas con geometrías complejas de aleaciones de titanio fabricadas a partir de polvo y alambre mediante la técnica aditiva de fusión de metal mediante plasma
|
Sinergias en la investigación en STEM |
| Capítulo | 2021 |
Diseño previo de un Ciclo de Mejora en el Aula Virtual (CIMAV) en el estudio de Ciencia de los Materiales
|
Ciclos de mejora en el aula. Año 2020 Experiencias de innovación docente de la Universidad de Sevilla |
| Editorial | 2021 |
Editorial: Tailored porous biomaterials for hard and soft tissues: focus on surface functionalization
|
Frontiers in Materials |
| Artículo | 2021 |
Electrical and reaction performances of packed-bed plasma reactors moderated with ferroelectric or dielectric materials
|
PLASMA PROCESSES AND POLYMERS |
| Revisión | 2021 |
Environmental impact of nanoparticles’ application as an emerging technology: a review
|
MATERIALS |
| Corrección | 2021 |
Erratum: Guillermo M., et al. Environmental impact of nanoparticles' application as an emerging technology: a review
|
MATERIALS |
| Artículo | 2021 |
Estimation of lateral track irregularity through Kalman filtering techniques
|
IEEE ACCESS |
| Artículo | 2021 |
Estimation of lateral track irregularity using a Kalman filter. Experimental validation
|
JOURNAL OF SOUND AND VIBRATION |
| Capítulo | 2021 |
Estudio del procesamiento de la aleación de níquel Hastelloy C-22 mediante la técnica de fabricación aditiva Plasma Metal Deposition (PMD)
|
Sinergias en la investigación en STEM |
| Artículo | 2021 |
Fabrication and characterization of Ag- and Ga-doped mesoporous glass-coated scaffolds based on natural marine sponges with improved mechanical properties
|
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A |
| Artículo | 2021 |
Fabrication and characterization of superficially modified porous dental implants
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2021 |
Fe3O4-Au core-shell nanoparticles as a multimodal platform for in vivo imaging and focused photothermal therapy
|
PHARMACEUTICS |
| Artículo | 2021 |
Improved corrosion behavior and biocompatibility of porous titanium samples coated with bioactive chitosan-based nanocomposites
|
MATERIALS |
| Artículo | 2021 |
Influence of starting powders on the final properties of W-Cu alloys manufactured through rapid sinter pressing technique
|
POWDER METALLURGY |
| Artículo | 2021 |
Influence of successive chemical and thermochemical treatments on surface features of Ti6Al4V samples manufactured by SLM
|
METALS |
| Artículo | 2021 |
Influence of the porosity and type of bioglass on the micro-mechanical and bioactive behavior of coated porous titanium substrates
|
JOURNAL OF NON-CRYSTALLINE SOLIDS |
| Artículo | 2021 |
Magnetic 3D scaffolds for tissue engineering applications: bioactive glass (45S5) coated with iron-loaded hydroxyapatite nanoparticles.
|
Biomedical materials (Bristol, England) |
| Artículo | 2021 |
Measurement of railroad track irregularities using an automated recording vehicle
|
MEASUREMENT |
| Artículo | 2021 |
New insights on the conversion reaction mechanism in metal oxide electrodes for sodium-ion batteries
|
NANOMATERIALS |
| Artículo | 2021 |
PEGylated terbium-based nanorods as multimodal bioimaging contrast agents
|
ACS APPLIED NANO MATERIALS |
| Artículo | 2021 |
Reversible Multi-Electron Storage Enabled by Na5V(PO4)2F2 for Rechargeable Magnesium Batteries
|
Energy Storage Materials |
| Libro | 2021 |
Scientific advances in STEM: from professor to students
|
Scientific Advances in STEM: From Professor to Students |
| Artículo | 2021 |
Simulation of the electrical resistance sintering of hardmetal powders
|
METALS AND MATERIALS INTERNATIONAL |
| Libro | 2021 |
Sinergias en la investigación en STEM
|
Sinergias en la investigación en STEM |
| Artículo | 2021 |
Study of the interaction mechanism between hydrophilic thiol capped gold nanoparticles and melamine in aqueous medium.
|
COLLOIDS AND SURFACES B-BIOINTERFACES |
| Artículo | 2021 |
Superficial characteristics and functionalization effectiveness of non-toxic glutathione-capped magnetic, fluorescent, metallic and hybrid nanoparticles for biomedical applications
|
METALS |
| Artículo | 2021 |
Synergistic effect of rhbmp‐2 protein and nanotextured titanium alloy surface to improve osteogenic implant properties
|
METALS |
| Artículo | 2021 |
Synthesis and deposition of silver nanoparticles on porous titanium substrates for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2021 |
The role of Ni and Co in suppressing O-Loss in Li-Rich layered cathodes
|
ADVANCED FUNCTIONAL MATERIALS |
| Artículo | 2021 |
Thermal modeling of the port on a refining furnace to prevent copper infiltration and slag accretion
|
MATERIALS |
| Artículo | 2021 |
Tribo-mechanical and cellular behavior of superficially modified porous titanium samples using femtosecond laser
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2020 |
(S)TEM structural and compositional nanoanalyses of chemically synthesized glutathione-shelled nanoparticles
|
APPLIED NANOSCIENCE |
| Artículo | 2020 |
A structural comparison of ordered and non-ordered ion doped silicate bioactive glasses
|
MATERIALS |
| Artículo | 2020 |
Advanced titanium scaffolds obtained by directional freeze-drying: on the influence of processing conditions
|
Frontiers in Bioengineering and Biotechnology |
| Artículo | 2020 |
Application and experimental validation of a multibody model with weakly coupled lateral and vertical dynamics to a scaled railway vehicle
|
SENSORS |
| Artículo | 2020 |
Artificial neural networks applied to the measurement of lateral wheel-rail contact force: A comparison with a harmonic cancellation method
|
MECHANISM AND MACHINE THEORY |
| Artículo | 2020 |
Biofunctional and tribomechanical behavior of porous titanium substrates coated with a bioactive glass bilayer (45S5-1393)
|
ACS APPLIED MATERIALS & INTERFACES |
| Capítulo | 2020 |
Captando la atención del alumnado en el estudio de Ciencias de los Materiales a través de un cambio metodológico
|
Ciclos de mejora en el aula, año 2019: experiencias de innovación docente de la Universidad de Sevilla |
| Artículo | 2020 |
Characterization and monitoring of titanium bone implants with impedance spectroscopy
|
SENSORS |
| Artículo | 2020 |
Charging mechanism of Li2MnO3
|
CHEMISTRY OF MATERIALS |
| Revisión | 2020 |
Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders
|
Journal of Manufacturing Processes |
| Artículo | 2020 |
Development by mechanochemistry of La0.8Sr0.2Ga0.8Mg0.2O2.8electrolyte for SOFCs
|
MATERIALS |
| Capítulo | 2020 |
Diseño, fabricación y ensayo de materiales laminados basados en el metal duro con propiedades mecánicas mejoradas
|
La investigación de hoy, el futuro de mañana |
| Artículo | 2020 |
Doped iron oxide scaffolds with gradient porosity fabricated by freeze casting: pore morphology prediction and processing parameters
|
MATERIALS SCIENCE AND TECHNOLOGY |
| Artículo | 2020 |
Effect of processing atmosphere and secondary operations on the mechanical properties of additive manufactured AISI 316L stainless steel by plasma metal deposition
|
METALS |
| Resumen congreso | 2020 |
Enhanced osteoblast adhesion and differentiation by porous Ti scaffolds
|
OSTEOPOROSIS INTERNATIONAL |
| Artículo | 2020 |
Estudio de biocompatibilidad y osteointegración de nuevos materiales protésicos
|
REVISTA DE OSTEOPOROSIS Y METABOLISMO MINERAL |
| Capítulo | 2020 |
Fabricación de Hastelloy C-22 mediante plasma transferred ARC
|
La investigación de hoy, el futuro de mañana |
| Artículo | 2020 |
Graphene-coated Ti-Nb-Ta-Mn foams: A promising approach towards a suitable biomaterial for bone replacement
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2020 |
In vitro bone cell behavior on porous titanium samples: Influence of porosity by loose sintering and space holder techniques
|
METALS |
| Artículo | 2020 |
Influence of Cosurfactant on the Synthesis of Surface-Modified Na2/3Ni1/3Mn2/3O2 as a Cathode for Sodium-Ion Batteries
|
ChemElectroChem |
| Artículo | 2020 |
Influence of the test configuration and temperature on the mechanical behaviour of WC-Co
|
METALS |
| Revisión | 2020 |
Inorganic solids for dual magnesium and sodium battery electrodes
|
JOURNAL OF SOLID STATE ELECTROCHEMISTRY |
| Artículo | 2020 |
Insights about the interaction of methotrexate loaded hydrophilic gold nanoparticles: spectroscopic, morphological and structural characterizations
|
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS |
| Capítulo | 2020 |
Investigation of titanium composites produced via plasma transferred ARC: influence of the processing parameters on the composites’ microstructures
|
La investigación de hoy, el futuro de mañana |
| Artículo | 2020 |
Iron Oxide-Iron Sulfide Hybrid Nanosheets as High-Performance Conversion-Type Anodes for Sodium-Ion Batteries
|
ACS APPLIED ENERGY MATERIALS |
| Libro | 2020 |
La investigación de hoy, el futuro de mañana
|
La investigación de hoy, el futuro de mañana |
| Artículo | 2020 |
Low temperature synthesis of transparent conductive boron doped diamond films for optoelectronic applications: Role of hydrogen on the electrical properties
|
APPLIED MATERIALS TODAY |
| Otros | 2020 |
Mirada microscópica de los materiales: metalografía de aceros
|
Portal De Realidad Extendida de la Universidad de Sevilla |
| Artículo | 2020 |
Porous titanium cylinders obtained by the freeze- casting technique: Influence of process parameters on porosity and mechanical behavior
|
METALS |
| Artículo | 2020 |
Porous titanium substrates coated with a bilayer of bioactive glasses
|
JOURNAL OF NON-CRYSTALLINE SOLIDS |
| Ponencia | 2020 |
Preliminary study of the processing parameters effect on the properties of Ti6Al4V specimens fabricated via additive manufacturing
|
Euro PM 2018 Congress and Exhibition |
| Artículo | 2020 |
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere
|
METALS |
| Artículo | 2020 |
Quantifying oxygen distortions in lithium-rich transition-metal-oxide cathodes using ABF STEM
|
ULTRAMICROSCOPY |
| Artículo | 2020 |
Reaction layer analysis of in situ reinforced titanium composites: Influence of the starting material composition on the mechanical properties
|
METALS |
| Artículo | 2020 |
Single source precursor route to iron sulfide nanomaterials for energy storage
|
CHEMICAL PHYSICS LETTERS |
| Capítulo | 2020 |
Síntesis e inmovilización de nanopartículas de plata sobre substratos de titanio poroso con potencial uso en materiales implantables
|
La investigación de hoy, el futuro de mañana |
| Ponencia | 2020 |
Study on Processing Nickel Alloy Hastelloy C-22 by Additive Manufacturing Technique Plasma Metal Deposition (PMD)
|
Euro PM 2019 Congress and Exhibition |
| Artículo | 2020 |
Superstructure control of first-cycle voltage hysteresis in oxygen-redox cathodes
|
NATURE |
| Artículo | 2020 |
Surface modification of porous titanium discs using femtosecond laser structuring
|
METALS |
| Ponencia | 2020 |
Synthesis and characterization of Pd over novel TiO2 mixtures: insights on metal-support interactions
|
Proceedings of 1st International Electronic Conference on Catalysis Sciences |
| Artículo | 2020 |
Tailoring materials by high-energy ball milling: TiO2 mixtures for catalyst support application
|
Materials Today Chemistry |
| Artículo | 2020 |
Use of impedance spectroscopy for the characterization of in-vitro osteoblast cell response in porous titanium bone implants
|
METALS |
| Artículo | 2020 |
Villari effect at low strain in magnetoactive materials
|
MATERIALS |
| Artículo | 2020 |
Waste Pd/Fish-Collagen as anode for energy storage
|
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
| Artículo | 2020 |
Wheel-rail contact force measurement using strain gauges and distance lasers on a scaled railway vehicle
|
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
| Artículo | 2019 |
An alternative procedure to measure railroad track irregularities. Application to a scaled track
|
MEASUREMENT |
| Libro | 2019 |
Avances en la investigación en ciencia e ingeniería
|
Avances en la investigación en ciencia e ingeniería |
| Artículo | 2019 |
Bacterial behavior on coated porous titanium substrates for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2019 |
Balancing biofunctional and biomechanical properties using porous titanium reinforced by carbon nanotubes
|
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A |
| Artículo | 2019 |
Balancing porosity and mechanical properties of titanium samples to favor cellular growth against bacteria
|
METALS |
| Artículo | 2019 |
Bioactive glass (45S5)-based 3D scaffolds coated with magnesium and zinc-loaded hydroxyapatite nanoparticles for tissue engineering applications
|
COLLOIDS AND SURFACES B-BIOINTERFACES |
| Artículo | 2019 |
Ceramic dies selection for electrical resistance sintering of metallic materials
|
CERAMICS INTERNATIONAL |
| Artículo | 2019 |
Depth-dependent oxygen redox activity in lithium-rich layered oxide cathodes
|
JOURNAL OF MATERIALS CHEMISTRY A |
| Artículo | 2019 |
Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2019 |
Directed irradiation synthesis as an advanced plasma technology for surface modification to activate porous and “as-received” titanium surfaces
|
METALS |
| Artículo | 2019 |
Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates
|
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH |
| Artículo | 2019 |
Electron microscopy characterization of the reaction layer in titanium composites reinforced with B4C particles and the effect of the presence of aluminium
|
MATERIALS RESEARCH EXPRESS |
| Capítulo | 2019 |
Estudio preliminar de los parámetros de fabricación en las propiedades finales de piezas de titanio comercialmente puro con geometrías sencillas producidos mediante la técnica de “additive manufacturing”
|
Avances en la investigación en ciencia e ingeniería |
| Capítulo | 2019 |
Estudio y comparativa de la influencia del tipo de refuerzo en materiales compuestos de base titanio fabricados por técnicas de compactación caliente inductiva
|
Avances en la investigación en ciencia e ingeniería |
| Artículo | 2019 |
Exploring the high-voltage Mg2+/Na+ co-intercalation reaction of Na3VCr(PO4)3 in Mg-ion batteries
|
JOURNAL OF MATERIALS CHEMISTRY A |
| Artículo | 2019 |
Fracture toughness of cemented carbides obtained by electrical resistance sintering
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2019 |
Hard metal production by ERS: processing parameter roles in final properties
|
METALS |
| Capítulo | 2019 |
In situ titanium composites: XRD study of secondary phases tied to the processing conditions and starting materials
|
Inelastic X-Ray scattering and X-Ray powder diffraction applications |
| Artículo | 2019 |
Influence of bar thermal hardening via tempcore method on their properties after stretching
|
Chernye Metally |
| Artículo | 2019 |
Influence of the compaction pressure and sintering temperature on the mechanical properties of porous titanium for biomedical applications
|
METALS |
| Artículo | 2019 |
Influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites
|
POLYMER TESTING |
| Artículo | 2019 |
Mesoporous silica submicron particles (MCM-41) incorporating nanoscale Ag: synthesis, characterization and application as drug delivery coatings
|
JOURNAL OF POROUS MATERIALS |
| Artículo | 2019 |
Multibody model of railway vehicles with weakly coupled vertical and lateral dynamics
|
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
| Artículo | 2019 |
Nature of the "Z"-phase in layered Na-ion battery cathodes
|
ENERGY & ENVIRONMENTAL SCIENCE |
| Artículo | 2019 |
Plasma enabled conformal and damage free encapsulation of fragile molecular matter: from surface-supported to on-device nanostructures
|
ADVANCED FUNCTIONAL MATERIALS |
| Artículo | 2019 |
Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique
|
APPLIED SCIENCES-BASEL |
| Artículo | 2019 |
Porous titanium surfaces to control bacteria growth: mechanical properties and sulfonated polyetheretherketone coatings as antibiofouling approaches
|
METALS |
| Artículo | 2019 |
Post-failure life evaluation: a corrosion-fatigue case history
|
ENGINEERING FAILURE ANALYSIS |
| Ponencia | 2019 |
Processing of 17-4PH by additive manufacturing using a plasma metal deposition (PMD) technique
|
Euro PM 2019 Congress and Exhibition |
| Artículo | 2019 |
Production of ultrafine grained hardmetals by electrical resistance sintering
|
METALS |
| Ponencia | 2019 |
Secondary phases study in titanium matrix reinforced with TiB2
|
Euro PM 2019 Congress and Exhibition |
| Ponencia | 2019 |
Simulación MEF del ensayo de rotura a tracción del acero corrugado tempcore B500SD
|
Anales de Mecánica de la Fractura |
| Artículo | 2019 |
Síntesis e inmovilización de nanopartículas de plata sobre substratos de titanio poroso con potencial uso en materiales implantables
|
Iatreia |
| Artículo | 2019 |
Sodium ion storage performance of magnetron sputtered WO3 thin films
|
ELECTROCHIMICA ACTA |
| Artículo | 2019 |
Strain hardening exponent and strain at maximum stress: steel rebar case
|
CONSTRUCTION AND BUILDING MATERIALS |
| Artículo | 2019 |
Structural and compositional analysis of Co-based coatings after catalytic tests for the sodium borohydride hydrolysis
|
MATERIALS RESEARCH EXPRESS |
| Artículo | 2019 |
Superior electrochemical performance of TiO2 sodium-ion battery anodes in diglyme-based electrolyte solution
|
JOURNAL OF POWER SOURCES |
| Artículo | 2019 |
Surface nickel particles generated by exsolution from a perovskite structure
|
JOURNAL OF SOLID STATE CHEMISTRY |
| Ponencia | 2019 |
Synthesis and size evolution of 1D hydroxyapatite crystals under surfactant-free hydrothermal conditions
|
5TH INTERNATIONAL MEETING FOR RESEARCHERS IN MATERIALS AND PLASMA TECHNOLOGY (5TH IMRMPT) |
| Artículo | 2019 |
Synthesis of a cubic Ti(BCN) advanced ceramic by a solid-gas mechanochemical reaction
|
CERAMICS INTERNATIONAL |
| Artículo | 2019 |
Targeted T-1 Magnetic Resonance Imaging Contrast Enhancement with Extraordinarily Small CoFe2O4 Nanoparticles
|
ACS APPLIED MATERIALS & INTERFACES |
| Artículo | 2019 |
Titanium-castor oil based polyurethane composite foams for bone tissue engineering
|
Journal of biomaterials science. Polymer ed |
| Artículo | 2019 |
Ultrastable CoxSiyOz Nanowires by Glancing Angle Deposition with Magnetron Sputtering as Novel Electrocatalyst for Water Oxidation
|
CHEMCATCHEM |
| Ponencia | 2019 |
University-enterprise: a win-win relationship, from business to research
|
Engineering Education towards sustainability: approaches for institutionalization and teaching implementation : Second International Conference on Engineering Education for the 21st Century – ICEE21C 2019 |
| Artículo | 2019 |
Villari effect in silicone/FeGa composites
|
Bulletin of Materials Science |
| Artículo | 2019 |
What Triggers Oxygen Loss in Oxygen Redox Cathode Materials?
|
CHEMISTRY OF MATERIALS |
| Ponencia | 2018 |
A simple and economical device to process Ti cylinders with elongated porosity by freeze-casting techniques: Design and manufacturing
|
Key engineering materials |
| Artículo | 2018 |
Bioactive coatings on porous titanium for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Biodegradabiliy of spherical mesoporous silica particles (MCM-41) in simulated body fluid (SBF)
|
AMERICAN MINERALOGIST |
| Libro | 2018 |
Colección de problemas resueltos de ciencia de materiales aeroespaciales
|
Colección de problemas resueltos de ciencia de materiales aeroespaciales |
| Artículo | 2018 |
Degradation Mechanisms at the Li10GeP2S12/LiCoO2 Cathode Interface in an All-Solid-State Lithium-Ion Battery
|
ACS APPLIED MATERIALS & INTERFACES |
| Artículo | 2018 |
Development of a novel fcc structure for an amorphous-nanocrystalline Ti-33Nb-4Mn (at.%) ternary alloy
|
MATERIALS CHARACTERIZATION |
| Artículo | 2018 |
Different models for simulation of mechanical behaviour of porous materials.
|
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| Artículo | 2018 |
Electrophoretic deposition of chitosan/bioactive glass/silica coatings on stainless steel and WE43 Mg alloy substrates
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Engineering of III-nitride semiconductors on low temperature co-fired ceramics
|
Scientific reports |
| Artículo | 2018 |
Improvement of the balance between a reduced stress shielding and bone rit ingrowth by bioactive coatings onto porous titanium substrates
|
SURFACE & COATINGS TECHNOLOGY |
| Ponencia | 2018 |
Influence of rebar design on mechanical behaviour of Tempcore steel
|
Procedia Structural Integrity |
| Artículo | 2018 |
Influence of temperature on the biaxial strength of cemented carbides with different microstructures
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Ponencia | 2018 |
Isotopic composition of lead used in the El Giraldillo casting
|
Conserving cultural heritage |
| Libro | 2018 |
IV jornada de investigación y postgrado
|
IV jornada de investigación y postgrado |
| Artículo | 2018 |
Low-Dose Aberration-Free Imaging of Li-Rich Cathode Materials at Various States of Charge Using Electron Ptychography
|
NANO LETTERS |
| Artículo | 2018 |
Mechanosynthesis of Sr1-xLaxTiO3 anodes for SOFCs: Structure and electrical conductivity
|
JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2018 |
Microstructural and XRD analysis and study of the properties of the system Ti-TiAl-B4C processed under different operational conditions
|
METALS |
| Artículo | 2018 |
Microstructural engineering and use of efficient poison resistant Au-doped Ni-GDC ultrathin anodes in methane-fed solid oxide fuel cells
|
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
| Artículo | 2018 |
Microstructure and room-temperature mechanical properties of crystalline and amorphous FeAl based melt spun ribbons
|
JOURNAL OF NON-CRYSTALLINE SOLIDS |
| Artículo | 2018 |
Model of dissolution in the framework of tissue engineering and drug delivery
|
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY |
| Artículo | 2018 |
Oxygen redox chemistry without excess alkali-metal ions in Na-2/3[Mg0.28Mn0.72]O-2
|
NATURE CHEMISTRY |
| Artículo | 2018 |
Powder-materials impact on nanoparticle-reinforced Ti-6Al-4V matrix composites produced via inductive hot pressing
|
International Journal of Materials and Product Technology |
| Artículo | 2018 |
Preparation and characterization of titanium-segmented polyurethane composites for bone tissue engineering
|
JOURNAL OF BIOMATERIALS APPLICATIONS |
| Artículo | 2018 |
Sensing and biosensing with screen printed electrodes modified with nanostructured nickel oxide thin films prepared by magnetron sputtering at oblique angles
|
ELECTROCHEMISTRY COMMUNICATIONS |
| Artículo | 2018 |
Sodium storage behavior of Na0.66Ni0.33-xZnxMn0.67O2 (x=0, 0.07 and 0.14) positive materials in diglyme-based electrolytes
|
JOURNAL OF POWER SOURCES |
| Artículo | 2018 |
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Strength and reliability of WC-Co cemented carbides: Understanding microstructural effects on the basis of R-curve behavior and fractography
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2018 |
Strong activation effect on a ru-co-c thin film catalyst for the hydrolysis of sodium borohydride
|
Scientific reports |
| Corrección | 2018 |
Strong activation effect on a Ru-Co-C thin film catalyst for the hydrolysis of sodium borohydride (vol 8, 9755, 2018)
|
Scientific reports |
| Artículo | 2018 |
Surface modification of Ti-6Al-4V alloys manufactured by selective laser melting: Microstructural and tribo-mechanical characterization
|
SURFACE & COATINGS TECHNOLOGY |
| Artículo | 2018 |
Synthesis and characterization of manganese containing mesoporous bioactive glass nanoparticles for biomedical applications
|
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE |
| Artículo | 2018 |
The effect of the Tempcore treatment on tensile properties of mild rebar steel
|
Stahl und Eisen |
| Artículo | 2018 |
Transfer of individual micro- and nanoparticles for high-precision 3D analysis using 360 degrees electron tomography
|
Small Methods |
| Artículo | 2018 |
Validation of multibody modeling and simulation using an instrumented bicycle: from the computer to the road
|
MULTIBODY SYSTEM DYNAMICS |
| Artículo | 2017 |
A new family of cermets: Chemically complex but microstructurally simple
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2017 |
Ajuste de los aceros corrugados ferríticos, austeníticos y austenoferríticos a los modelos de endurecimiento elastoplástico por deformación
|
Revista de metalurgia |
| Artículo | 2017 |
Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys
|
MATERIALS |
| Artículo | 2017 |
Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Direct Hot Pressing
|
MATERIALS |
| Artículo | 2017 |
Development of electric resistance sintering process for the fabrication of hard metals: processing, microstructure and mechanical properties
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2017 |
Direct visualization of electrical transport-induced alloy formation and composition changes in filled multi-wall carbon nanotubes by in situ scanning transmission electron microscopy
|
JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2017 |
Electrophoretic deposition and characterization of chitosan/bioactive glass composite coatings on Mg alloy substrates
|
ELECTROCHIMICA ACTA |
| Artículo | 2017 |
High performance novel gadolinium doped ceria/yttria stabilized zirconia/nickel layered and hybrid thin film anodes for application in solid oxide fuel cells
|
JOURNAL OF POWER SOURCES |
| Artículo | 2017 |
In vitro and in vivo study of poly(lactic-co-glycolic) (PLGA) membranes treated with oxygen plasma and coated with nanostructured hydroxyapatite ultrathin films for guided bone regeneration processes
|
POLYMERS |
| Artículo | 2017 |
Incorporation of calcium containing mesoporous (MCM-41-type) particles in electrospun pcl fibers by using benign solvents
|
POLYMERS |
| Ponencia | 2017 |
Plasma assisted oblique angle deposition of transparent and conductive in-plane anisotropic ITO thin films
|
Plasma Nano Science and Technology |
| Artículo | 2017 |
Processing and characterization of surrogate nuclear materials with controlled radial porosity
|
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY |
| Artículo | 2017 |
Sol-gel deposition of bioactive hydroxyapatite on porous titanium
|
Revista Cubana de Investigaciones Biomédicas |
| Artículo | 2017 |
Study of the Influence of TiB Content and Temperature in the Properties of In Situ Titanium Matrix Composites
|
METALS |
| Ponencia | 2017 |
Temperature effect on the properties of titanium matrices with 20%vol. Ti-Al, reinforced by 50% vol. of B4C
|
Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition |
| Artículo | 2017 |
The role of cobalt hydroxide in deactivation of thin film Co-based catalysts for sodium borohydride hydrolysis
|
APPLIED CATALYSIS B-ENVIRONMENTAL |
| Ponencia | 2017 |
Ti/B4C composites prepared by in situ reaction using inductive hot pressing
|
Key engineering materials |
| Artículo | 2016 |
A new method for synthetizing nanocrystalline aluminium nitride via a solid-gas direct reaction
|
POWDER TECHNOLOGY |
| Artículo | 2016 |
Characterization and application of a new pH sensor based on magnetron sputtered porous WO3 thin films deposited at oblique angles
|
ELECTROCHIMICA ACTA |
| Ponencia | 2016 |
Comparison of hard metals fabricated by electrical resistance sintering (ERS) and sinter-HIP
|
World PM 2016 Congress and Exhibition |
| Ponencia | 2016 |
Definición de un modelo de comportamiento plástico durante la estricción para los aceros corrugados de alta ductilidad (Tesis Doctoral)
|
III Jornada de investigación y postgrado: Libro de Actas |
| Artículo | 2016 |
Design, processing and characterization of advanced titanium scaffolds with controlled radial porosity: a new sequential compaction device
|
Frontiers in Bioengineering and Biotechnology |
| Artículo | 2016 |
Design, processing and characterization of materials with controlled radial porosity for biomedical and nuclear applications
|
Key engineering materials |
| Artículo | 2016 |
Design, processing and characterization of titanium with radial graded porosity for bone implants
|
MATERIALS & DESIGN |
| Ponencia | 2016 |
Development of the ERS process for the fabrication of hardmetal parts
|
World PM 2016 Congress and Exhibition |
| Ponencia | 2016 |
Development of Ti-MMCs by the use of different reinforcements via conventional Hot-Pressing
|
Key engineering materials |
| Ponencia | 2016 |
Diseño, procesamiento y caracterización de laminados de tipo CERMET/WC-CO y WC-CO/WC-CO para aplicaciones de herramientas
|
III Jornada de investigación y postgrado: Libro de Actas |
| Artículo | 2016 |
Effect of Nickel and Magnesium on the Electrochemical Behavior of AA 1050 Alloys in Nitric Acid Solution
|
JOURNAL OF THE ELECTROCHEMICAL SOCIETY |
| Artículo | 2016 |
Electrical conductivity of metal powder aggregates and sintered compacts
|
JOURNAL OF MATERIALS SCIENCE |
| Ponencia | 2016 |
Electrical resistance sintering (ERS) simulationtool. Application to hardmetals
|
World PM 2016 Congress and Exhibition |
| Ponencia | 2016 |
Electrophoretic deposition of PEEK/45S5 bioactive glass coating on porous titanium substrate: Influence of processing conditions and porosity parameters
|
Key engineering materials |
| Ponencia | 2016 |
Fabricación mediante innovadoras técnicas pulvimetalúrgicas de materiales compuestos de matriz ligera
|
III Jornada de investigación y postgrado: Libro de Actas |
| Artículo | 2016 |
Fabrication and characterization of CeO2 pellets for simulation of nuclear fuel
|
NUCLEAR ENGINEERING AND DESIGN |
| Artículo | 2016 |
Implementation of an effective time-saving two-stage methodology for microstructural characterization of cemented carbides
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2016 |
Influence of Sintering Temperature on the Microstructure and Mechanical Properties of In Situ Reinforced Titanium Composites by Inductive Hot Pressing
|
MATERIALS |
| Ponencia | 2016 |
Influence of the particle size and raw materials in W-Cu Alloys manufactured Via rapid sinter pressing
|
World PM 2016 Congress and Exhibition |
| Artículo | 2016 |
Microstructural effects on the R-curve behavior of WC-Co cemented carbides
|
MATERIALS & DESIGN |
| Capítulo | 2016 |
Nanoscale characterization of Co and Co-B catalytic coatings before and after catalytic tests for the sodium borohydride hydrolysis
|
Proceeding of the 16th European Microscopy Conference |
| Artículo | 2016 |
Non-enzymatic Glucose electrochemical sensor made of porous NiO thin films prepared by reactive magnetron sputtering at oblique angles
|
ELECTROCHIMICA ACTA |
| Ponencia | 2016 |
Processing and characterization of Ti-6Al-4V samples manufactured by selective laser melting
|
Key engineering materials |
| Artículo | 2016 |
Quantitative analysis of Ni 2p photoemission in NiO and Ni diluted in a SiO2 matrix
|
SURFACE SCIENCE |
| Ponencia | 2016 |
Study of titanium metal matrix composites reinforced by boron carbides and amorphous boron particles produced via direct hot pressing
|
Key engineering materials |
| Artículo | 2016 |
Synthesis, characterization and performance of robust poison resistant ultrathin film yttria stabilized zirconia nickel anodes for application in solid electrolyte fuel cells
|
JOURNAL OF POWER SOURCES |
| Artículo | 2016 |
Tailor-made preparation of Co-C, Co-B, and Co catalytic thin films using magnetron sputtering: insights into structure-composition and activation effects for catalyzed NaBH4 hydrolysis
|
RSC ADVANCES |
| Artículo | 2016 |
Timing of calcium nitrate addition affects morphology, dispersity and composition of bioactive glass nanoparticles
|
RSC ADVANCES |
| Ponencia | 2016 |
Titanium matrix composites with high specific stiffness
|
Key engineering materials |
| Artículo | 2016 |
Titanium scaffolds with multi-scale porosity obtained by controlled chemical and electrochemical treatments of porous solids from PM space holder technique
|
Frontiers in Bioengineering and Biotechnology |
| Artículo | 2016 |
Ultra-stiff large-area carpets of carbon nanotubes
|
NANOSCALE |
| Ponencia | 2016 |
Validation of a scaled railway vehicle computational model with experimental results
|
Civil-Comp Proceedings |
| Artículo | 2015 |
"In Operando" X-ray Absorption Spectroscopy Analysis of Structural Changes During Electrochemical Cycling of WO3 and WxSiyOz Amorphous Electrochromic Thin Film Cathodes
|
JOURNAL OF PHYSICAL CHEMISTRY C |
| Artículo | 2015 |
A novel and improved surfactant-modified Prussian Blue electrode for amperometric detection of free chlorine in water
|
SENSORS AND ACTUATORS B-CHEMICAL |
| Artículo | 2015 |
Anisotropic in-plane conductivity and dichroic gold plasmon resonance in plasma-assisted ITO thin films e-beam-evaporated at oblique angles
|
ACS APPLIED MATERIALS & INTERFACES |
| Artículo | 2015 |
Atomic scale characterization of SiO2/4H-SiC interfaces in MOSFETs devices
|
SOLID STATE COMMUNICATIONS |
| Artículo | 2015 |
Aumento de la tenacidad de fractura en cermets basados en carbonitruro de titanio mediante la adición de grafito
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
Ceramic composites from mesoporous silica coated multi-wall carbon nanotubes
|
MICROPOROUS AND MESOPOROUS MATERIALS |
| Artículo | 2015 |
Comportamiento Micro-Mecánico y Simulación Numérica de Titanio con Porosidad Gradiente para Aplicaciones Biomédicas
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
Development of new titanium implants with longitudinal gradient porosity by space-holder technique
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 2015 |
Diseño y fabricación de laminados tipo ti(c,n)-co/wc-co con un potencial equilibrio de propiedades en servicio
|
Anales de Mecánica de la Fractura |
| Ponencia | 2015 |
Diseño, procesado y caracterización de materiales con porosidad radial controlada para aplicaciones nucleares
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
Effect of magnesium and titanium on the cathodic behaviour of aluminium in nitric acid
|
SURFACE AND INTERFACE ANALYSIS |
| Ponencia | 2015 |
Electrophoretic deposition and characterization of chitosan/45S5 bioactive glass composite coatings on porous titanium for biomedical applications
|
Key engineering materials |
| Artículo | 2015 |
FIB/FESEM experimental and analytical assessment of R-curve behavior of WC-Co cemented carbides
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
| Artículo | 2015 |
Imaging screw dislocations at atomic resolution by aberration-corrected electron optical sectioning
|
NATURE COMMUNICATIONS |
| Artículo | 2015 |
Micro/macroporous system: MFI-type zeolite crystals with embedded macropores
|
ADVANCED MATERIALS |
| Artículo | 2015 |
Microstructure of mixed oxide thin films prepared by magnetron sputtering at oblique angles
|
THIN SOLID FILMS |
| Artículo | 2015 |
On the influence of space holder in the development of porous titanium implants: Mechanical, computational and biological evaluation
|
MATERIALS CHARACTERIZATION |
| Artículo | 2015 |
Porous, robust highly conducting Ni-YSZ thin film anodes prepared by magnetron sputtering at oblique angles for application as anodes and buffer layers in solid oxide fuel cells
|
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
| Artículo | 2015 |
Resistencia mecánica de carburos cementados: Influencia de la temperatura y la microestructura
|
Anales de Mecánica de la Fractura |
| Artículo | 2015 |
Toughening of complete solid solution cermets by graphite addition
|
CHEMICAL ENGINEERING JOURNAL |
| Artículo | 2015 |
Uniform surface modification of 3D Bioglass®-based scaffolds with mesoporous silica particles (MCM-41) for enhancing drug delivery capability
|
Frontiers in Bioengineering and Biotechnology |
| Ponencia | 2014 |
A dissociation mechanism for the [a plus c] dislocation in GaN
|
ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2013 (EMAG2013) |
| Artículo | 2014 |
Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending
|
MATERIALS & DESIGN |
| Ponencia | 2014 |
Characterisation of Defects at Non-Polar GaN/InGaN Junctions in Novel Materials for Application in Light Emitting Diodes
|
ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2013 (EMAG2013) |
| Ponencia | 2014 |
Design, Fabrication and Characterization of Titanium with Graded Porosity by using Space-holder Technique
|
Procedia Materials Science |
| Artículo | 2014 |
Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions
|
MATERIALS & DESIGN |
| Artículo | 2014 |
Development of novel mesoporous silica-based bioactive glass scaffolds with drug delivery capabilities
|
Advances in Science and Technology |
| Artículo | 2014 |
Development of porous titanium for biomedical applications: A comparison between loose sintering and space-holder techniques
|
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS |
| Artículo | 2014 |
Direct Observation of Depth-Dependent Atomic Displacements Associated with Dislocations in Gallium Nitride
|
PHYSICAL REVIEW LETTERS |
| Artículo | 2014 |
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions
|
MATERIALS & DESIGN |
| Capítulo | 2014 |
Fatigue of Cemented Carbides
|
Comprehensive Hard Materials |
| Artículo | 2014 |
Fracture and fatigue of rock bit cemented carbides: Mechanics and mechanisms of crack growth resistance under monotonic and cyclic loading
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2014 |
Fracture mechanics approach to fretting fatigue behaviour of coated aluminium alloy components
|
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN |
| Artículo | 2014 |
Nanocrystalline Al Composites from Powder Milled under Ammonia Gas Flow
|
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING |
| Ponencia | 2014 |
Observation of depth-dependent atomic displacements related to dislocations in GaN by optical sectioning in the STEM
|
ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2013 (EMAG2013) |
| Ponencia | 2014 |
Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS)
|
Euro PM 2014 Congress and Exhibition, Proceedings |
| Artículo | 2014 |
Processing and characterisation of cermet/hardmetal laminates with strong interfaces
|
MATERIALS & DESIGN |
| Artículo | 2014 |
Simultaneous quantification of light elements in thin films deposited on Si substrates using proton EBS (Elastic Backscattering Spectroscopy)
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
| Ponencia | 2014 |
STEM optical sectioning for imaging screw displacements in dislocation core structures
|
MICROSCOPY AND MICROANALYSIS |
| Ponencia | 2014 |
The addition of aluminium and manganese to ruthenium liner layers for use as a copper diffusion barrier
|
2014 IEEE INTERNATIONAL INTERCONNECT TECHNOLOGY CONFERENCE / ADVANCED METALLIZATION CONFERENCE (IITC/AMC) |
| Artículo | 2014 |
Tuning the transmittance and the electrochromic behavior of CoxSiyOz thin films prepared by magnetron sputtering at glancing angle
|
SOLAR ENERGY MATERIALS AND SOLAR CELLS |
| Ponencia | 2013 |
Compositional analysis of InAs-GaAs-GaSb heterostructures by Low-Loss Electron Energy Loss Spectroscopy
|
18TH MICROSCOPY OF SEMICONDUCTING MATERIALS CONFERENCE (MSM XVIII) |
| Artículo | 2013 |
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta) (C,N)-based cermets
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2013 |
Electrochromism in WOx and WxSiyOz Thin Films Prepared by Magnetron Sputtering at Glancing Angles
|
NANOSCIENCE AND NANOTECHNOLOGY LETTERS |
| Artículo | 2013 |
Fatigue performance improvement of electrical discharge machined hardmetals by means of combined thermal annealing and surface modification routes
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2013 |
Low refractive index SiOF thin films prepared by reactive magnetron sputtering
|
THIN SOLID FILMS |
| Artículo | 2013 |
Parametric investigation of temperature distribution in field activated sintering apparatus
|
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| Ponencia | 2013 |
Processing and Characterization of Porous Titanium Powder Metallurgy for Implants and Joint Replacements
|
5TH LATIN AMERICAN CONGRESS ON BIOMEDICAL ENGINEERING (CLAIB 2011): SUSTAINABLE TECHNOLOGIES FOR THE HEALTH OF ALL, PTS 1 AND 2 |
| Artículo | 2013 |
Scanning transmission electron microscopy investigations of self-forming diffusion barrier formation in Cu(Mn) alloys on SiO2
|
APL MATERIALS |
| Artículo | 2013 |
The dissociation of the [a plus c] dislocation in GaN
|
PHILOSOPHICAL MAGAZINE |
| Ponencia | 2013 |
Titanium for Biomedical Application with Radial Graded Porosity: Development of a Novel Compaction Device
|
2013 PAN AMERICAN HEALTH CARE EXCHANGES (PAHCE) |
| Ponencia | 2012 |
(S)TEM analysis of the interdiffusion and barrier layer formation in Mn/Cu heterostructures on SiO2 for interconnect technologies
|
ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2011 (EMAG 2011) |
| Artículo | 2012 |
Chemical and structural investigations of the incorporation of metal manganese into ruthenium thin films for use as copper diffusion barrier layers
|
APPLIED PHYSICS LETTERS |
| Artículo | 2012 |
Chemical and structural investigations of the interactions of Cu with MnSiO3 diffusion barrier layers
|
JOURNAL OF APPLIED PHYSICS |
| Ponencia | 2012 |
Comparative Study of Electrical and Microstructural Properties of 4H-SiC MOSFETs
|
Materials Science Forum |
| Artículo | 2012 |
Effect Of The Eshelby-Stroh Twist In Dislocations In GaN Imaged End-On
|
MICROSCOPY AND MICROANALYSIS |
| Artículo | 2012 |
Electrochromic behavior of W xSi yO z thin films prepared by reactive magnetron sputtering at normal and glancing angles
|
ACS APPLIED MATERIALS & INTERFACES |
| Ponencia | 2012 |
Fracture toughness of rock bit cemented carbides
|
Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012 |
| Ponencia | 2012 |
Growth characteristics of Mn silicate barrier layers on SiO 2
|
2012 IEEE International Interconnect Technology Conference, IITC 2012 |
| Ponencia | 2012 |
Growth Characteristics of Mn silicate barrier layers on SiO2
|
2012 IEEE INTERNATIONAL INTERCONNECT TECHNOLOGY CONFERENCE (IITC) |
| Capítulo | 2012 |
High-resolution electron microscopy of semiconductor heterostructures and nanostructures
|
Semiconductor research: experimental techniques |
| Artículo | 2012 |
Influence of plasma-generated negative oxygen ion impingement on magnetron sputtered amorphous SiO2 thin films during growth at low temperatures
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2012 |
Microstructural evolution and mechanical properties of the Ti-6Al-4V alloy produced by vacuum hot-pressing
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
| Ponencia | 2012 |
Nano-analytical and electrical characterization of 4H-SIC MOSFETs
|
Materials Science Forum |
| Artículo | 2012 |
Processing and characterization of porous titanium for implants by using NaCl as space holder
|
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
| Artículo | 2012 |
Processing, characterization and biological testing of porous titanium obtained by space-holder technique
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 2012 |
Quantitative study of the interfacial intermixing and segregation effects across the wetting layer of Ga(As,Sb)-capped InAs quantum dots
|
APPLIED PHYSICS LETTERS |
| Artículo | 2012 |
STEM Analysis Of Cu(Mn) Self-Forming Diffusion Barriers on SiO2 For Applications In The Semiconductor Industry
|
MICROSCOPY AND MICROANALYSIS |
| Artículo | 2012 |
The effect of nickel on alloy microstructure and electrochemical behaviour of AA1050 aluminium alloy in acid and alkaline solutions
|
ELECTROCHIMICA ACTA |
| Artículo | 2012 |
Thermal Conductivity of Powder Aggregates and Porous Compacts
|
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE |
| Artículo | 2012 |
XPS and AES analyses of cerium conversion coatings generated on AA5083 by thermal activation
|
SURFACE & COATINGS TECHNOLOGY |
| Capítulo | 2011 |
Aprendizaje activo y gestión de la información en la caracterización mecánica virtual de materiales políméricos para alumnos de ingeniería
|
XIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: Libro de Resúmenes |
| Artículo | 2011 |
Chemical and structural investigation of the role of both Mn and Mn oxide in the formation of manganese silicate barrier layers on SiO(2)
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2011 |
Conventional Powder Metallurgy Process and Characterization of Porous Titanium for Biomedical Applications
|
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE |
| Artículo | 2011 |
Critical flux enhancement in electrically assisted microfiltration
|
SEPARATION AND PURIFICATION TECHNOLOGY |
| Ponencia | 2011 |
Development of titanium implants with graded porosity by conventional powder metallurgy: A stress shielding alternative
|
24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials |
| Ponencia | 2011 |
Effect of mixing parameters on the final properties of titanium composites reinforced with carbon nanotubes
|
Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011 |
| Artículo | 2011 |
Estudio de las conducciones de agua de la nueva instalación de la Fuente de los Leones de la Alhambra: condicionalmente sobre los materiales a emplear
|
Cuadernos de la Alhambra |
| Artículo | 2011 |
Fabrication of Barbed-Shaped SnO@SnO2 Core/Shell Nanowires
|
JOURNAL OF PHYSICAL CHEMISTRY C |
| Ponencia | 2011 |
Growth and characterization of InAlN layers nearly lattice-matched to GaN
|
PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 8, NO 7-8 |
| Artículo | 2011 |
Growth of ZnO nanowires through thermal oxidation of metallic zinc films on CdTe substrates
|
JOURNAL OF ALLOYS AND COMPOUNDS |
| Artículo | 2011 |
Influence of nano-reinforcements on the mechanical properties and microstructure of titanium matrix composites
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Artículo | 2011 |
Influence of the Initiation Length in Predictions of Life in Fretting Fatigue
|
STRAIN |
| Artículo | 2011 |
Interdiffusion and barrier layer formation in thermally evaporated Mn/Cu heterostructures on SiO2 substrates
|
APPLIED PHYSICS LETTERS |
| Ponencia | 2011 |
New theoretical tool to model powder systems under compression
|
Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011 |
| Capítulo | 2011 |
Nueva metodología docente basada en el aprendizaje por proyecto aplicada a la elasticidad y resistencia de materiales
|
XIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: Libro de Resúmenes |
| Ponencia | 2011 |
Processing and characterization of titanium porous implants by powder metallurgy: Conventional and space-holder techniques
|
24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials |
| Artículo | 2011 |
Structural characterization of GaSb-capped InAs/GaAs quantum dots with a GaAs intermediate layer
|
MATERIALS LETTERS |
| Artículo | 2011 |
Structural Origin of Enhanced Luminescence Efficiency of Antimony Irradiated InAs Quantum Dots
|
ADVANCED SCIENCE LETTERS |
| Artículo | 2011 |
Surface topography evolution through production of aluminium offset lithographic plates
|
WEAR |
| Artículo | 2011 |
Three dimensional atom probe imaging of GaAsSb quantum rings
|
ULTRAMICROSCOPY |
| Artículo | 2010 |
Anodic film formation on binary Al-Mg and Al-Ti alloys in nitric acid
|
SURFACE AND INTERFACE ANALYSIS |
| Artículo | 2010 |
Blocking of indium incorporation by antimony in III-V-Sb nanostructures
|
NANOTECHNOLOGY |
| Artículo | 2010 |
Brittle fracture of a crane hook
|
ENGINEERING FAILURE ANALYSIS |
| Artículo | 2010 |
Consolidation of titanium matrix composites to maximum density by different hot pressing techniques
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
| Artículo | 2010 |
Effect of excimer laser surface melting on the microstructure and corrosion performance of the die cast AZ91D magnesium alloy
|
CORROSION SCIENCE |
| Artículo | 2010 |
Effect of suspension chemistry onto voltage drop: Application to electro-flotation
|
POWDER TECHNOLOGY |
| Artículo | 2010 |
Enhanced performance of the AA2050-T8 aluminium alloy following excimer laser surface melting and anodising processes
|
THIN SOLID FILMS |
| Artículo | 2010 |
Influence of sintering conditions on the microstructural and mechanical properties of porous Ti c.p. for biomedical applications
|
Anales de Mecánica de la Fractura |
| Ponencia | 2010 |
Natural oxidation of InN quantum dots: the role of cubic InN
|
PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 7, NO 1 |
| Artículo | 2010 |
Performance of Al alloys following excimer LSM - anodising approaches
|
SURFACE AND INTERFACE ANALYSIS |
| Artículo | 2010 |
Phase mapping of aging process in InN nanostructures: oxygen incorporation and the role of the zinc blende phase
|
NANOTECHNOLOGY |
| Artículo | 2010 |
Powder compaction law for cold die pressing
|
GRANULAR MATTER |
| Ponencia | 2010 |
Quasicontinuum Method at Finite Temperature Applied to the Study of Nanovoids Evolution in Fcc Crystals
|
PROGRESS IN INDUSTRIAL MATHEMATICS AT ECMI 2008 |
| Artículo | 2010 |
Relationship between microstructure and corrosion performance of AA2050-T8 aluminium alloy after excimer laser surface melting
|
CORROSION SCIENCE |
| Ponencia | 2010 |
Small and long fatigue cracks growth in pm steels
|
Advances in Powder Metallurgy and Particulate Materials - 2010, Proceedings of the 2010 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2010 |
| Artículo | 2010 |
Structural and compositional homogeneity of InAlN epitaxial layers nearly lattice-matched to GaN
|
ACTA MATERIALIA |
| Artículo | 2010 |
Structural and optical changes induced by incorporation of antimony into InAs/GaAs(001) quantum dots
|
PHYSICAL REVIEW B |
| Corrección | 2010 |
Structural and optical changes induced by incorporation of antimony into InAs/GaAs(001) quantum dots (vol 82, 235316, 2010)
|
PHYSICAL REVIEW B |
| Ponencia | 2010 |
Study of influence of the alloying elements in the final properties of β-Ti alloys obtained by pm
|
Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010 |
| Ponencia | 2010 |
Surface modification approaches for enhancing fracture and fatigue resistance of electrical discharge machined hardmetals
|
Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010 |
| Artículo | 2010 |
Surface nanostructuring of TiO2 thin films by high energy ion irradiation
|
PHYSICAL REVIEW B |
| Artículo | 2010 |
Temperature and stress fields evolution during spark plasma sintering processes
|
JOURNAL OF MATERIALS SCIENCE |
| Ponencia | 2010 |
Theoretical modelling of quaternary GaInAsSb/GaAs self-assembled quantum dots
|
QUANTUM DOTS 2010 |
| Artículo | 2009 |
Analysis of crack evolution in fretting fatigue with spherical contact
|
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN |
| Artículo | 2009 |
Bioleaching of zinc from gold ores using Acidithiobacillus ferrooxidans
|
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS |
| Artículo | 2009 |
Comportamiento a fractura de aceros para trabajo en frio: influencia de la microestructura
|
Anales de Mecánica de la Fractura |
| Artículo | 2009 |
Cyanide removal from cassava mill wastewater using Azotobactor vinelandii TISTR 1094 with mixed microorganisms in activated sludge treatment system
|
JOURNAL OF HAZARDOUS MATERIALS |
| Revisión | 2009 |
Determination of the composition of InxGa1-xN from strain measurements
|
ACTA MATERIALIA |
| Artículo | 2009 |
Effect of starting powder grade on sintering and properties of PM titanium metal matrix composites
|
POWDER METALLURGY |
| Artículo | 2009 |
Effect of surfactants on the stability and filterability of whey suspensions
|
SEPARATION AND PURIFICATION TECHNOLOGY |
| Artículo | 2009 |
Evaluation of an Adsorption-Desorption Process for Concentrating Heavy Metal Ions from Acidic Wastewaters
|
ADSORPTION SCIENCE & TECHNOLOGY |
| Artículo | 2009 |
Formation of spatially addressed Ga(As)Sb quantum rings on GaAs(001) substrates by droplet epitaxy
|
CRYSTAL GROWTH & DESIGN |
| Artículo | 2009 |
High resolution electron microscopy of GaAs capped GaSb nanostructures
|
APPLIED PHYSICS LETTERS |
| Artículo | 2009 |
Influence of pH and Al-2(SO4)(3) on the stability of whey suspensions
|
SEPARATION AND PURIFICATION TECHNOLOGY |
| Artículo | 2009 |
La sostenibilidad en la Ingeniería Industrial
|
Sevilla Técnica |
| Artículo | 2009 |
On selection of milling atmosphere for production of Al-10%Ti powders
|
POWDER METALLURGY |
| Artículo | 2009 |
Structural changes during the natural aging process of InN quantum dots
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2008 |
Aqueous near-infrared fluorescent composites based on apoferritin-encapsulated PbS quantum dots
|
ADVANCED MATERIALS |
| Artículo | 2008 |
Economic aspects of critical flux operability in star shaped microfiltration membranes: Influence of some operating conditions
|
JOURNAL OF MEMBRANE SCIENCE |
| Artículo | 2008 |
Effects of Operating Modes on the Rejection Behavior using Ceramic Membranes
|
SEPARATION SCIENCE AND TECHNOLOGY |
| Ponencia | 2008 |
Electron transport properties of indium oxide - indium nitride metal-oxide-semiconductor heterostructures
|
PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 5, NO 2 2008 |
| Artículo | 2008 |
Electronic and photoconductive properties of ultrathin InGaN photodetectors
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2008 |
Estudio de la evolución de nanohuecos a temperatura finita en cristales metálicos mediante el método cuasicontinuo
|
Anales de Mecánica de la Fractura |
| Artículo | 2008 |
Fatigue behavior of alumina-zirconia multilayered ceramics
|
JOURNAL OF THE AMERICAN CERAMIC SOCIETY |
| Ponencia | 2008 |
Fatigue behavior of high-density sintered steel
|
Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008 |
| Artículo | 2008 |
Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC-Co cemented carbides
|
ENGINEERING FRACTURE MECHANICS |
| Ponencia | 2008 |
Influence of the hot pressing parameters on mechanical and microstructural properties of titanium matrix composites
|
Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008 |
| Artículo | 2008 |
Influencia de la longitud de iniciación en las predicciones de vida a fatiga por fretting
|
Anales de Mecánica de la Fractura |
| Ponencia | 2008 |
InN/In2O3 heterostructures
|
PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 5, NO 6 |
| Ponencia | 2008 |
La Fe Victoriosa casting features
|
Materials Science Forum |
| Artículo | 2008 |
Loading configuration effects on the strength reliability of alumina-zirconia multilayered ceramics
|
COMPOSITES SCIENCE AND TECHNOLOGY |
| Ponencia | 2008 |
Metallic powders amorphization by mechanical alloying and subsequent electrical sintering
|
Materials Science Forum |
| Artículo | 2008 |
On the use of multiaxial fatigue criteria for fretting fatigue life assessment
|
INTERNATIONAL JOURNAL OF FATIGUE |
| Capítulo | 2008 |
Strain relief and nucleation mechanisms of InN quantum dots
|
Quantum Dots: Research, Technology and Applications |
| Ponencia | 2008 |
Structure of cubic polytype indium nitride layers on top of modified sapphire substrates
|
PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 5, NO 2 2008 |
| Ponencia | 2007 |
Advances in materials physics for IFE at DENIM
|
Proceedings - Symposium on Fusion Engineering |
| Artículo | 2007 |
Algunos casos del papel que la simulación computacional multiescala desarrolla para comprender la irradiación de materiales en la fusión nuclear
|
Nuclear España |
| Artículo | 2007 |
Application of fracture mechanics to estimate fretting fatigue endurance curves
|
ENGINEERING FRACTURE MECHANICS |
| Artículo | 2007 |
Coalescence aspects of III-nitride epitaxy
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2007 |
Configuration of the misfit dislocation networks in uncapped and capped InN quantum dots
|
APPLIED PHYSICS LETTERS |
| Artículo | 2007 |
Cubic InN growth on sapphire (0001) using cubic indium oxide as buffer layer
|
APPLIED PHYSICS LETTERS |
| Libro | 2007 |
Educación física, deporte y nuevas tecnologías
|
Educación física, deporte y nuevas tecnologías |
| Artículo | 2007 |
Effect of island coalescence on structural and electrical properties of InN thin films
|
JOURNAL OF CRYSTAL GROWTH |
| Capítulo | 2007 |
Evaluación de materiales para la restauración
|
El Giraldillo: La veleta del tiempo : proyecto de investigación e intervención |
| Ponencia | 2007 |
Evaluation of the influence of GaN and AIN as pseudosubstrates on the crystalline quality of InN layers
|
PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS VOL 4, NO 4 |
| Capítulo | 2007 |
Examen global de la escultura
|
El Giraldillo: La veleta del tiempo : proyecto de investigación e intervención |
| Artículo | 2007 |
Fracture behaviour of linear friction welds in titanium alloys
|
Anales de Mecánica de la Fractura |
| Artículo | 2007 |
Incorporation of sb in InAs/GaAs quantum dots
|
APPLIED PHYSICS LETTERS |
| Artículo | 2007 |
Influence of self-interstitial mobility on damage accumulation in zirconium under fission irradiation conditions
|
JOURNAL OF NUCLEAR MATERIALS |
| Artículo | 2007 |
Intermetallic effects on the ductility of sintered aluminium
|
Materials Science Forum |
| Artículo | 2007 |
Investigation of service failures in automobile shock absorbers
|
ENGINEERING FAILURE ANALYSIS |
| Artículo | 2007 |
Kinetic Monte Carlo modelling of neutron irradiation damage in iron
|
FUSION ENGINEERING AND DESIGN |
| Artículo | 2007 |
Obtención y procesado de aleaciones de grano ultrafino, nanométrico y amorfas mediante aleado mecánico
|
Revista de metalurgia |
| Capítulo | 2007 |
Reposición en la Giralda
|
El Giraldillo: La veleta del tiempo : proyecto de investigación e intervención |
| Artículo | 2007 |
Strain mapping at the atomic scale in highly mismatched heterointerfaces
|
ADVANCED FUNCTIONAL MATERIALS |
| Artículo | 2007 |
Strain relief analysis of InN quantum dots grown on GaN
|
NANOSCALE RESEARCH LETTERS |
| Artículo | 2007 |
Temperature dependence of damage accumulation in alpha-zirconium
|
JOURNAL OF NUCLEAR MATERIALS |
| Artículo | 2007 |
Threshold strength evaluation on an al2o3-zro2 multilayered system
|
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
| Artículo | 2006 |
Al-Ti powder produced through mechanical alloying for different times
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 2006 |
Correlation between structural and electrical properties of InN thin films prepared by molecular beam epitaxy
|
Superlattices and Microstructures |
| Artículo | 2006 |
Deterioration of a metallic mould
|
ENGINEERING FAILURE ANALYSIS |
| Artículo | 2006 |
Determinación de la evolución de la grieta en fretting fatiga con contacto esférico
|
Anales de Mecánica de la Fractura |
| Artículo | 2006 |
Effect of dislocations on electrical and electron transport properties of InN thin films. I. Strain relief and formation of a dislocation network
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2006 |
Effect of dislocations on electrical and electron transport properties of InN thin films. II. Density and mobility of the carriers
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2006 |
Fracture and fatigue behavior of electrical-discharge machined cemented carbides
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2006 |
Fracture behaviour of an Al2O3–ZrO2 multi‐layered ceramic with residual stresses due to phase transformations
|
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES |
| Artículo | 2006 |
Green and sintered properties of consolidated mixtures of mechanically alloyed and elemental Al powders
|
Materials Science Forum |
| Artículo | 2006 |
Influence of PCA content on mechanical properties of sintered MA aluminium
|
Materials Science Forum |
| Artículo | 2006 |
Medida de la tenacidad de fractura a partir de entallas en carburos cementados WC-Co
|
Anales de Mecánica de la Fractura |
| Artículo | 2006 |
Misfit relaxation of InN quantum dots: Effect of the GaN capping layer
|
APPLIED PHYSICS LETTERS |
| Artículo | 2006 |
Prediction of the crack extension under fretting wear loading conditions
|
INTERNATIONAL JOURNAL OF FATIGUE |
| Artículo | 2006 |
Propagation in fretting fatigue from a surface defect
|
TRIBOLOGY INTERNATIONAL |
| Artículo | 2006 |
Radiation damage in metals, and amorphous silica in inertial fusion reactors: Modeling and experiments
|
JOURNAL DE PHYSIQUE IV |
| Artículo | 2006 |
Residual stresses, strength and toughness of laminates with different layer thickness ratios
|
ACTA MATERIALIA |
| Ponencia | 2006 |
Structural characterization of InN quantum dots grown by Metalorganic Vapour Phase Epitaxy
|
PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 3, NO 6 |
| Artículo | 2005 |
Activation and damage of fusion materials and tritium effects in inertial fusion reactors: Strategy for adequate irradiation
|
LASER AND PARTICLE BEAMS |
| Ponencia | 2005 |
Activation energy for surface diffusion in GaInNAs quantum wells
|
MICROSCOPY OF SEMICONDUCTING MATERIALS |
| Artículo | 2005 |
An approach to the formation mechanism of the composition fluctuation in GaInNAs quantum wells
|
SEMICONDUCTOR SCIENCE AND TECHNOLOGY |
| Artículo | 2005 |
Daño por contacto Hertziano en carburos cementados WC-Co: Influencia de la microestructura y de los parámetros de contacto
|
Anales de Mecánica de la Fractura |
| Ponencia | 2005 |
Defect generation in high In and N content GaInNAs quantum wells: unfaulting of Frank dislocation loops
|
MICROSCOPY OF SEMICONDUCTING MATERIALS |
| Artículo | 2005 |
Effective stress during biaxial compression of powder aggregates
|
MATERIALS SCIENCE AND TECHNOLOGY |
| Ponencia | 2005 |
Fracture and fatigue behaviour of mullite/molybdenum-composites
|
FRACTOGRAPHY OF ADVANCED CERAMICS II |
| Ponencia | 2005 |
Inertial fusion reactor physics: Effect of activation and radiation damage of materials, and tritium emissions
|
32nd EPS Conference on Plasma Physics 2005, EPS 2005, Held with the 8th International Workshop on Fast Ignition of Fusion Targets - Europhysics Conference Abstracts |
| Artículo | 2005 |
Influencia de algunos recubrimientos sobre la resistencia a fatiga por fretting
|
Anales de Mecánica de la Fractura |
| Artículo | 2005 |
Loading mode effects on the fracture toughness and fatigue crack growth resistance of hardmetals
|
SCRIPTA MATERIALIA |
| Artículo | 2005 |
Long-term behaviour of irradiated hcp Zr using Monte Carlo simulations
|
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS |
| Artículo | 2005 |
Mechanical properties of thermal barrier coatings at room temperature
|
FRACTOGRAPHY OF ADVANCED CERAMICS II |
| Artículo | 2005 |
Nucleation of InN quantum dots on GaN by metalorganic vapor phase epitaxy
|
APPLIED PHYSICS LETTERS |
| Ponencia | 2005 |
Polvos de Al-Al3Ti obtenidos mediante aleado mecánico y tratamiento térmico
|
Revista de metalurgia |
| Artículo | 2005 |
Production of Al-Al3Ti powders by mechanical alloying and annealing
|
POWDER METALLURGY |
| Ponencia | 2005 |
Properties of two PM nitride-reinforced Al matrix composites
|
Euro PM 2005: Powder Metallurgy Congress and Exhibition |
| Artículo | 2005 |
Unfaulting of dislocation loops in the GaInNAs alloy: An estimation of the stacking fault energy
|
JOURNAL OF APPLIED PHYSICS |
| Artículo | 2005 |
Viabilidad del uso de la radiación solar concentrada al proceso de sinterización de cobre
|
Revista de metalurgia |
| Artículo | 2004 |
Advances in multiscale modeling of material irradiation damage
|
Nuclear España |
| Artículo | 2004 |
Comportamiento a Fractura de Materiales Multicapa Al2O3-5%tZrO2-30%mZrO2
|
Anales de Mecánica de la Fractura |
| Artículo | 2004 |
Estimación del límite de fatiga de carburos cementados WC-Co en el marco de la mecánica de la fractura elástica lineal
|
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO |
| Artículo | 2004 |
Evaluación de la Tenacidad de Fractura en Carburos Cementados Tenaces
|
Anales de Mecánica de la Fractura |
| Artículo | 2004 |
Fatigue behavior of powder metallurgy high-speed steels: fatigue limit prediction using a crack growth threshold-based approach
|
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
| Artículo | 2004 |
Influencia del coeficiente de rozamiento en fretting
|
Anales de Mecánica de la Fractura |
| Artículo | 2003 |
Advances in MA aluminium powders consolidation by mechanical cold pressing and vacuum sintering
|
Materials Science Forum |
| Artículo | 2003 |
Comportamiento a fatiga de carburos cementados WC-Co: Influencia del modo de solicitación y de la microestructura
|
Anales de Mecánica de la Fractura |
| Ponencia | 2003 |
Defect diffusion in hcp zirconium: A kinetic Monte Carlo approach
|
MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS |
| Artículo | 2003 |
Structure and properties of consolidated attrition-milled Al-5%Ti PM specimens
|
Materials Science Forum |
| Artículo | 2002 |
Comportamiento de Curva-R de Fisuras Pequeñas: Modelización e Implementación en el Análisis de la Fractura de Carburos Cementados
|
Anales de Mecánica de la Fractura |
| Artículo | 2002 |
Failure of gas turbine blades
|
WEAR |
| Artículo | 2002 |
On the fatigue crack growth behavior of wc-co cemented carbides: kinetics description, microstructural effects and fatigue sensitivity
|
ACTA MATERIALIA |
| Revisión | 2002 |
Phase change behavior of nitinol shape memory alloys. Influence of heat and thermomechanical treatments
|
ADVANCED ENGINEERING MATERIALS |
| Capítulo | 2002 |
Prospección arqueológica superficial en la zona de desarrollo de la Batalla de las Navas de Tolosa (Santa Elena, Jaén)
|
Anuario arqueológico de Andalucía 1999 |
| Ponencia | 2001 |
Determinación de la composición química de piezas metálicas históricas: aplicación a un bronce romano
|
III Congreso Nacional de Arqueometría |
| Artículo | 2001 |
Fatigue mechanics of WC–Co cemented carbides
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2001 |
Fracture toughness evaluation of hardmetals: influence of testing procedure
|
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS |
| Artículo | 2001 |
Influencia del Contenido de Ligante en la Resistencia a la Propagación de Grietas por Fatiga de Carburos Cementados
|
Anales de Mecánica de la Fractura |
| Artículo | 2001 |
Resistencia a la propagación de fisuras por fatiga en carburos cementados
|
Revista de metalurgia |
| Artículo | 2001 |
Simplificación del procesado de polvo de aluminio molido y estudio de las propiedades mecánicas de los compactos resultantes
|
Revista de metalurgia |
| Ponencia | 2000 |
Fractographic characterization of Al-Al3Ti samples produced by mechanical-alloying
|
ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS |
| Artículo | 1999 |
Changes in the pattern of visceral protein concentrations after internal biliary drainage in patients with obstructive jaundice
|
European Journal of Surgery |
| Artículo | 1999 |
Metallographic characterization of a NiTiCu shape memory alloy
|
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY |
| Artículo | 1999 |
Preoperative assessment of body fluid disturbances in patients with obstructive jaundice
|
WORLD JOURNAL OF SURGERY |
| Artículo | 1999 |
Prospección arqueológica superficial en la zona de desarrollo de la batalla de las Navas de Tolosa (Santa Elena, Jaén)
|
Anuario Arqueológico de Andalucía |
| Ponencia | 1998 |
Algunas observaciones sobre la sinterización del acero austenítico 316l en atmósfera de argón
|
Revista de metalurgia |
| Artículo | 1998 |
Comportamiento a la corrosión del acero 316l, sinterizado con distinto grado de porosidad.
|
Revista de metalurgia |
| Artículo | 1998 |
Estudio del análisis por fluorescencia de rayos X de minerales lateríticos usando perlas de fusión
|
Revista Cubana de Química |
| Artículo | 1998 |
Obtención de perlas de fusión con minerales lateríticos para análisis por fluorescencia de rayos X
|
Revista Cubana de Química |
| Libro | 1997 |
Curso de introducción a la metalurgia de la soldadura
|
Curso de introducción a la metalurgia de la soldadura |
| Artículo | 1997 |
Structure and properties of attrition-milled aluminium powder
|
JOURNAL OF MATERIALS SCIENCE |
| Artículo | 1996 |
Consolidation of mechanically alloyed aluminium by double cold-pressing and sintering
|
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
| Artículo | 1995 |
An alternative route to the consolidation of mechanically alloyed aluminum powder
|
MATERIALS TRANSACTIONS JIM |
| Artículo | 1995 |
Simplificación de la enseñanza de las microestructuras básicas de los metales
|
Revista de Enseñanza Universitaria |
| Artículo | 1993 |
Corrosion on Riotinto pier at Huelva
|
British Corrosion Journals |
| Artículo | 1993 |
Procesado pulvimetalúrgico del acero rápido T15: etapa de prensado
|
Revista de metalurgia |
| Artículo | 1989 |
Laboratory study of direct sintering behaviour of M35 high-speed steel powder
|
Metallurgia Italiana |
| Artículo | 1988 |
Comportamiento de polvo de acero M35 durante el prensado
|
Deformacion Metalica |
| Artículo | 1987 |
Estudio comparativo del bonificado de los aceros rápidos T15 convencional y pulvimetalúrgico
|
Revista de metalurgia |
| Artículo | 1987 |
Some case-histories of wear-related failures of metallic materials
|
WEAR |
| Artículo | 1986 |
Algunos casos prácticos de fallos metálicos relacionados con el desgaste
|
Revista de metalurgia |
